- TechToolsList - listserv.classicarcade.com

More fluke troubles!
by Dave Langley 30 Oct '01

30 Oct '01

Hi all ... Well since my 9100A died I managed to get a 9010, alas I am doomed to be the keeper of lots of dead fluke hardware as the 9010 is completely dead! The PSU tests out OK, but I've not looked at anything else. Also I noticed it does not have the RS232 option ... if I get it working has anyone got one of these for sale? Now onto the pods ... the 6802 and 8085 pods were both shipped without the cable in the self test socket. Guess what both have a pin broken off :o( Has anyone ever replaced these ribbons/headers with a home made effort? PS I have not forgotten about those who wanted the 9100 software but I cannot currently copy it. It's being sent onto someone who can for distribution. Dave Langley www.robotron-2084.co.uk To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the message body to: techtoolslist-request(a)flippers.com. Please direct other questions, comments, or problems to jrr(a)flippers.com.

4 8

My first time.
by Jean-Guy 26 Oct '01

26 Oct '01

1 0

Re: More fluke troubles!
by Electronicamuse＠aol.com 26 Oct '01

26 Oct '01

If you get different CKSUM each time you try, make sure to clean the legs. Dirty legs causes erratic results. Sometimes, the CKSUM is REALLY close, but not quite. Clean the legs and all is good. Dave To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the message body to: techtoolslist-request(a)flippers.com. Please direct other questions, comments, or problems to jrr(a)flippers.com.

1 0

Re: special test fixture - pinball
by A218＠aol.com 10 Oct '01

10 Oct '01

In a message dated 9/29/01 4:25:52 AM Eastern Daylight Time, bovine(a)mediaone.net writes: << Anyone else see one of these? Use one? Any info appreciated. >> Mark Clayton might know - he is a big time Gottlieb guy <A HREF="mark.clayton(a)i87.com">mark.clayton(a)i87.com</A> Art Mallet POB 456 Mechanicville NY 12118 Pay Pal ID A218(a)aol.com Find out what I am selling on eBay today - <A HREF="http://cgi3.ebay.com/aw-cgi/eBayISAPI.dll?ViewListedItems&userid=artfrom ny">click here</A> Visit my web site<A HREF=" ArtsArcadeGames.com"> ArtsArcadeGames.com</A> To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the message body to: techtoolslist-request(a)flippers.com. Please direct other questions, comments, or problems to jrr(a)flippers.com.

6 7

Fluke 9010 questions
by Werner Sharp 09 Oct '01

09 Oct '01

I've been using my Fluke to run a UUT and then break in to look at memory. Is there any easy way to resume the UUT after pausing/stopping it? Or do you always need to reset the microprocessor from the beginning? I want to be able to pause a running board, examine memory, and resume the game where it was paused. I would think it could do this but I must have overlooked something. Lastly, does anyone have a 6809 pod for sale? I'd also trade a 8088 pod + some cash if someone was interested. Werner Sharp sharpw(a)bellsouth.net To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the message body to: techtoolslist-request(a)flippers.com. Please direct other questions, comments, or problems to jrr(a)flippers.com.

3 2

Re: Fluke 9020a
by jeff.kaneko＠juno.com 06 Oct '01

06 Oct '01

100%. But, the 9020 is much more useful if you have a GPIB controller (or a PeeCee with an adaptor) to interface to it. (It also helps if you know how to write simple test programs). I don't thinks these can use 9010 programs (but I may be wrong) . . . . On Fri, 5 Oct 2001 12:30:11 EDT Electronicamuse(a)aol.com writes: > I have one of these coming next week. Is it compatible with 9010a > pods and > software,etc.? > > thanks > > > Dave ________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/web/. To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the message body to: techtoolslist-request(a)flippers.com. Please direct other questions, comments, or problems to jrr(a)flippers.com.

1 0

Fluke 9100A Display Troubles
by Dave Langley 05 Oct '01

05 Oct '01

Hi .... I decided to make a start on copying the 9100A software disks today, using Anadisk on my PC (very slow) for the system disks and the unit itself for the user disks (pod info). I'd only got about half way though copying the first user disk and the fluke shut down on me and there was a buzzer sounding??? I *think* the unit now boots OK , but there is no display although the status LED seem to be working OK. I've tried re-seating all the connectors but to no avail. Does anyone have any ideas? Dave Langley www.robotron-2084.co.uk To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the message body to: techtoolslist-request(a)flippers.com. Please direct other questions, comments, or problems to jrr(a)flippers.com.

1 0

Fluke scripts
by John Robertson 05 Oct '01

05 Oct '01

I am looking for these, I have a small collection including Asteroids (gotta get in a Vector element). Would like to correspond with others interested in trading info and files. John :-#)# To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the message body to: techtoolslist-request(a)flippers.com. Please direct other questions, comments, or problems to jrr(a)flippers.com.

3 4

FS/FT:Fluke, Kutz Kasch, ICE's, pinball, and more test equipment
by Corey Stup 05 Oct '01

05 Oct '01

Make offer or trade on all these items. Fluke 90, Z80 based. New in box. Opened, but never used. Has the video instruction, etc. Nice tester, I just don't have any need for another Z80 test system. Huntron Tracker Curve Tracer. HTR1005B. No probes. Nice bright trace, no burn on screen. Great for dynamic incircuit component checking. Kurz Kasch Signature Analyzer II. Very nice metal unit. Also has a built in logic probe. Complete. Metalink MicroICE 8031/8051 ICE. Includes manual and DOS software. Older model ICE with a 8031/8032/8051 pod. Pod has 8031 installed. Williams System 3-6 pinball test fixture. Needs wiring work, includes spare harness. Includes displays and master display board. Sophia Systems 6801/6803 ICE. No software. Base unit and POD included. Email if you're interested. To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the message body to: techtoolslist-request(a)flippers.com. Please direct other questions, comments, or problems to jrr(a)flippers.com.

2 1

HP logic comparator
by Werner Sharp 03 Oct '01

03 Oct '01

Hi all, I just got one of these a few weeks ago and it's a really cool tool. You clip it on suspect TTL chip and put a reference TTL chip inside the housing and it will show you any difference in the logic states between the two chips. I have one question though for anyone who might use one of these. The manual implies that you can use it on 14-pin DIPs as well as 16-pin DIPs. It works fine on 16-pin ones but I can't get it to work on 14-pin ones. Is there something I'm missing or not doing correctly? Do I need to jumper a ground connection for the last two pins hanging off? Thanks for any suggestions. Werner Sharp sharpw(a)bellsouth.net To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the message body to: techtoolslist-request(a)flippers.com. Please direct other questions, comments, or problems to jrr(a)flippers.com.

3 2