April 2014 - TechToolsList - listserv.classicarcade.com

Alpha Electronics Dynamic Integrated Digital IC Tester on eBay
by John Robertson 17 Feb '20

17 Feb '20

I chatted with the seller and he confirms that it does NOT power up. So chances are the battery backed up system ROM has failed. Item 390623172259 He reduced the price on his own from the original asking $59.95 to $19.95. Pity. I was hoping to find a good one to extract the program from to save mine... If someone here buys it and CAN extract the ROM data I'd sure like a copy! John :-#(# _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

11 29

Re: [Techtoolslist] Fluke on Mario Bros.
by David Shoemaker 20 Apr '18

20 Apr '18

Looking at the manual for the Z80QT pod and the schematic I think I am getting an expected result. I hooked up the pod and hit BUS to run the bus test. I immediately get back CTL ERR showing 00000010 this is the HALT line. Looking at the schematic it appears HALT and INT are both tied together and pulled high. So the fluke can't exercise that line. Any way to ignore that error and verify the rest of the bus test? Oh and according the manual maximum clock frequency is 8.0 mhz. Does that mean this pod support Z80A/B/C ? From: David Shoemaker [mailto:davids@oz.net] Sent: Wednesday, November 16, 2011 10:38 PM To: 'Technical Tools Mail List' Subject: Fluke on Mario Bros. Anyone know if you can use either the base z80 pod or the z80qt pod on Mario bros? I know it uses the Z80A but I don't know what the pod is rated at. Thanks, David _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

4 7

Fluke 9000A mystery adapter (for me at least ;-)
by John Robertson 20 Feb '18

20 Feb '18

I have a pod module here called "Z8 I/F ADAPTER" Fluke #9000-200/AB. It has no cable to the base, just a 40 pin CPU cable. Inside is a couple of RAM chips, and some Fluke hybrid interface ICs. Any guesses? John :-#)#

3 7

Ivan 'Ironman' Stewart's Super Off Road trac pac fluke 9010a script
by John Doe 02 Feb '16

02 Feb '16

this is a code snip form the MAME driver: 59/************************************* 60 * 61 * Master CPU memory handlers 62 * 63 *************************************/ 64 65static ADDRESS_MAP_START( master_map_program, AS_PROGRAM, 8, leland_state ) 66 AM_RANGE(0x0000, 0x1fff) AM_ROM 67 AM_RANGE(0x2000, 0x9fff) AM_ROMBANK("bank1") 68 AM_RANGE(0xa000, 0xdfff) AM_ROMBANK("bank2") AM_WRITE(leland_battery_ram_w) AM_SHARE("battery") 69 AM_RANGE(0xe000, 0xefff) AM_RAM 70 AM_RANGE(0xf000, 0xf3ff) AM_READWRITE(leland_gated_paletteram_r, leland_gated_paletteram_w) AM_SHARE("paletteram") 71 AM_RANGE(0xf800, 0xf801) AM_WRITE(leland_master_video_addr_w) 72 ADDRESS_MAP_END 73 74 75static ADDRESS_MAP_START( master_map_io, AS_IO, 8, leland_state ) 76 ADDRESS_MAP_GLOBAL_MASK(0xff) 77 AM_RANGE(0xf0, 0xf0) AM_WRITE(leland_master_alt_bankswitch_w) 78 AM_RANGE(0xf2, 0xf2) AM_DEVREADWRITE_LEGACY("custom", leland_80186_response_r, leland_80186_command_lo_w) 79 AM_RANGE(0xf4, 0xf4) AM _DEVWRITE_LEGACY("custom", leland_80186_command_hi_w) 80 AM_RANGE(0xfd, 0xff) AM_READWRITE(leland_master_analog_key_r, leland_master_analog_key_w) 81 ADDRESS_MAP_END 82 83 84 85/************************************* 86 * 87 * Slave CPU memory handlers 88 * 89 *************************************/ 90 91static ADDRESS_MAP_START( slave_small_map_program, AS_PROGRAM, 8, leland_state ) 92 AM_RANGE(0x0000, 0x1fff) AM_ROM 93 AM_RANGE(0x2000, 0xdfff) AM_ROMBANK("bank3") 94 AM_RANGE(0xe000, 0xefff) AM_RAM 95 AM_RANGE(0xf800, 0xf801) AM_WRITE(leland_slave_video_addr_w) 96 AM_RANGE(0xf802, 0xf802) AM_READ(leland_raster_r) 97 AM_RANGE(0xf803, 0xf803) AM_WRITE(leland_slave_small_banksw_w) 98 ADDRESS_MAP_END 99 100 101static ADDRESS_MAP_START( slave_large_map_program, AS_PROGRAM, 8, leland_state ) 102 AM_RANGE(0x0000, 0x1fff) AM_ROM 103 AM_RANGE(0x4000, 0xbfff) AM_ROMBANK("bank3") 104 AM_RANGE(0xc000, 0xc000) AM_WRITE(leland_slave_large_banksw_w) 105 AM_RANGE(0xe000, 0 xefff) AM_RAM 106 AM_RANGE(0xf800, 0xf801) AM_WRITE(leland_slave_video_addr_w) 107 AM_RANGE(0xf802, 0xf802) AM_READ(leland_raster_r) 108 ADDRESS_MAP_END 109 110 111static ADDRESS_MAP_START( slave_map_io, AS_IO, 8, leland_state ) 112 ADDRESS_MAP_GLOBAL_MASK(0xff) 113 AM_RANGE(0x00, 0x1f) AM_READWRITE(leland_svram_port_r, leland_svram_port_w) 114 AM_RANGE(0x40, 0x5f) AM_READWRITE(leland_svram_port_r, leland_svram_port_w) 115 ADDRESS_MAP_END 116look at it and you'll find the memory map... ---------------------------------------------------------------------- Message: 1 Date: Mon, 4 Nov 2013 14:05:03 -0500 From: "sales htbs" <sales(a)htbsusa.com> Subject: [Techtoolslist] Ivan 'Ironman' Stewart's Super Off Road trac pac fluke 9010a script To: "'Technical Tools Mail List'" <techtoolslist(a)flippers.com> Message-ID: <003e01ced990$c4893f10$4d9bbd30$@com> Content-Type: text/plain; charset="us-ascii" Subject: Ivan 'Ironman' Stewart's Super Off Road trac pac fluke 9010a script Anyone have a script for Ivan 'Ironman' Stewart's Super Off Road trac pac fluke 9010a script I tried to learn a good board and it did not work I cannot find a memory map for this on quarter arcade I ran the Leland test for bottom board I have 3 board sets that I am working on 1 has the split screen track on top Other 2 were dead Any help would be great Thanks tony @ hi-tech ------------------------------ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippe rs.com http://seven.pairlist.net/mailman/listinfo/techtoolslist End of Techtoolslist Digest, Vol 107, Issue 2 ********************************************* _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 4

9100FT
by Andrew Welburn 05 Jun '15

05 Jun '15

long shot.. But has anyone seen, or knows of a service disk suitable for the 9100FT ? I'm updating my 9100 page soon as i've been working on 5 of these systems, but while i can set the 9100FT to acknowledge 16mb ram in post, the system always reports just 4mb.. I can actually get it to test 32mb (when installed 8x4mb) but the post always fails, and the dip switch combination is not even valid as per what is screened on the pcb. I dont think they ever anticipated any crazy person putting in 32mb ram and just abandoned compatability :) the v1.4 service disk is the latest version i have, but it only allows you to set 1,2 or 4mb system ram... any ideas? -- Andrew Welburn http://www.andys-arcade.com _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

4 11

HP 5004a and Berzerk
by Grant Thienemann 26 Apr '14

26 Apr '14

Hey Guys, Can someone tell me where to hook up the start and stop on my Berzerk boardset? With dumb luck I got the game working but I want to document all the signatures so I can work on getting my other PCBs working. Thanks Grant _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

Re: [Techtoolslist] Vector List web site
by teeray 26 Apr '14

26 Apr '14

What's up with web site I'm getting a 404 not found on everything except the home page. Thanks _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 5

Berzerk and Fluke 9010a
by Grant Thienemann 22 Apr '14

22 Apr '14

Hey Guys, I'm bound and determined to get my Berzerk working again. Currently I have it working to the point that the game will boot however the game will freeze randomly. List of things I have done: New sockets on the ZPU-1000 with new EPROMs and Z80 processor New ram sockets on the VFB-1000 and I have 4164 ram and 4116 ram that I'm looking into putting onto the VFB-1000. The BSC-1000 color board is fine, and the cleanest board I have on the machine. When I go to do the short ram check on my Berzerk board set, the 0-7FF fails, however the second one, 1000-17FF if I remember passes correctly. If anyone knows any tips or tricks with using the Fluke 9010a with a Berzerk board set I would appreciate it. Thanks Grant _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

4 7