August 2005 - TechToolsList - listserv.classicarcade.com

Fluke 9000A mystery adapter (for me at least ;-)
by John Robertson 20 Feb '18

20 Feb '18

I have a pod module here called "Z8 I/F ADAPTER" Fluke #9000-200/AB. It has no cable to the base, just a 40 pin CPU cable. Inside is a couple of RAM chips, and some Fluke hybrid interface ICs. Any guesses? John :-#)#

3 7

Re: Cracking the 9010A ROM signature generator
by Kev 02 Feb '13

02 Feb '13

2 3

Fluke pod cables (related to 6502 pod)
by David Shoemaker 27 May '08

27 May '08

4 4

Unipak 2B adaptor query
by Phil Morris 09 Mar '07

09 Mar '07

I have a Data I/O 29B EPROM programmer with a Unipak 2B and need to get hold of an adaptor for it, specifically adaptor no: 351B068 Does anyone either have one of these or know what it consists of please? Does it perhaps just re-route a few pins, or is there more to it than that? Thanks, Phil _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

5 7

Re: 8086 pod for fluke?
by Chris_Hardy＠vie.co.uk 13 Sep '05

13 Sep '05

Hey, that would be my cue :) All of the M72, M82, M84 games from Irem use a NEC V20 which is a 8086 with some extra instructions. It's also pin compatible so the 8086 pod is usable with it. Of course, there aren't exactly many of these around :) Chris (M72 = RType, Dragon Breed, XMultiply, + others, M82 = RType II, Pound for Pound, M84 = Major Title) ______________________________ Reply Separator _________________________________ Subject: 8086 pod for fluke? Author: Noel Johnson <nej(a)airmail.net> at Internet Date: 1/17/00 12:09 AM Hello All, I am about to obtain an 8086 pod for a fluke 9010. Did any arcade games use the 8086 or am I going to have to trade this puppy away?? Thanks! Noel

2 2

Spies
by mark.templeton＠wdr123m.freeserve.co.uk 23 Aug '05

23 Aug '05

I have found where some of the game manuals went, but where did the test equipment manuals go, when "spies" disappeared? In particular, I would like to find the Tektronix 7000 series 'scope and plugin manuals. Mark _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

3 2

RE: [Techtoolslist] Fluke pod compatability
by kklopp＠erols.com 23 Aug '05

23 Aug '05

What are you calling a 9100 pod? Some may think of the 9132 & it's equipment as a 9100 pod as well. In this case any 9132 equipment is not compatible with 9010A. If anyone has any design/program information on the 9132 not currently available (or any Fluke 9000 series info not currently available) please let me know so I can arrange scanning/pdfing. Thanks, Kev mowerman(a)erols.com Original Message: ----------------- From: Andy Welburn warlords(a)punkass.com Date: Tue, 23 Aug 2005 09:23:17 +0100 To: mark.templeton(a)wdr123m.freeserve.co.uk, techtoolslist(a)flippers.com Subject: RE: [Techtoolslist] Fluke pod compatability Yup Andy Welburn www.andysarcade.net [snip] > Can you please tell me... can 9000 series pods be used on 9100A systems? > Similarly, can 9100 pods be used on 9010A systems? > > Thank you for your thoughts. > > Mark _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ . _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

1 0

re: [Techtoolslist] Fluke pod compatability
by James Bright 23 Aug '05

23 Aug '05

1 0

Fluke pod compatability
by mark.templeton＠wdr123m.freeserve.co.uk 23 Aug '05

23 Aug '05

Can you please tell me... can 9000 series pods be used on 9100A systems? Similarly, can 9100 pods be used on 9010A systems? Thank you for your thoughts. Mark _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

2 1

Data I/O programmers
by mark.templeton＠wdr123m.freeserve.co.uk 15 Aug '05

15 Aug '05

I'm familiar with the Data I/O System 19 and 29B programmers, and their differences. 1. Can someone tell me where the 29A and 100A programmers fit into this family, and how they differ from the 19 and 29B? 2. I'm trying to use a UniPak on a System 19. How do I enter the manufacturer and device codes? The Unipak manual says to see the system manual, and the system manual says to see the Pak manual! Thank you in advance, Mark _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

1 0