TechToolsList

Download

techtools@listserv.classicarcade.com

January 2024

Designing a 9010 replacement LED display?
by John Robertson via Techtoolslist 09 Feb '24

09 Feb '24

I was looking at my 9005 and grumbling because the tube is missing, then I pulled out the 9010a service manual and you know, it looks like it would be a pretty easy fix to replace the tube with 32 digit alpha-numeric LEDs of the correct size on a small PCB and all that would be needed is to replace the UDN6118 fluorescent drivers with suitable LED drivers and find a place to grab 5V and ground and then mount the new display to the board... Maybe it would work? Anyone interested in poking at the KiCAD layout? I have no free time, but I know there are folks out there looking for a solution to bad or weak tubes... Here is the page: ftp://ftp.flippers.com/TTL/Test_Equipment/Fluke/9010%20Series/9010_Fixture%… <ftp://ftp.flippers.com/TTL/Test_Equipment/Fluke/9010%20Series/9010_Fixture%…> John :-#)# -- _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

8 16