August 2004 - TechToolsList - listserv.classicarcade.com

Fluke 9000A mystery adapter (for me at least ;-)
by John Robertson 20 Feb '18

20 Feb '18

I have a pod module here called "Z8 I/F ADAPTER" Fluke #9000-200/AB. It has no cable to the base, just a 40 pin CPU cable. Inside is a couple of RAM chips, and some Fluke hybrid interface ICs. Any guesses? John :-#)#

3 7

Re: Cracking the 9010A ROM signature generator
by Kev 02 Feb '13

02 Feb '13

2 3

Fluke pod cables (related to 6502 pod)
by David Shoemaker 27 May '08

27 May '08

4 4

Re: 8086 pod for fluke?
by Chris_Hardy＠vie.co.uk 13 Sep '05

13 Sep '05

Hey, that would be my cue :) All of the M72, M82, M84 games from Irem use a NEC V20 which is a 8086 with some extra instructions. It's also pin compatible so the 8086 pod is usable with it. Of course, there aren't exactly many of these around :) Chris (M72 = RType, Dragon Breed, XMultiply, + others, M82 = RType II, Pound for Pound, M84 = Major Title) ______________________________ Reply Separator _________________________________ Subject: 8086 pod for fluke? Author: Noel Johnson <nej(a)airmail.net> at Internet Date: 1/17/00 12:09 AM Hello All, I am about to obtain an 8086 pod for a fluke 9010. Did any arcade games use the 8086 or am I going to have to trade this puppy away?? Thanks! Noel

2 2

Re[2]: Fluke T-shooters
by Chris_Hardy＠vie.co.uk 10 Aug '05

10 Aug '05

Does anyone know if the scripts for the 9010 work on a 9100a?? It may also be of interest to know that someone (presumably Al Kossow) has scanned and pdf'ed a lot of the fluke manuals and uploaded them to www.spies.com/arcade. There's a fluke directory which has some 9010 scripts and the .exe to compile them, and in the TE directory there are manuals for the 9010,9100 and most of the POD's. (I presume Al wrote the scripts) Unfortunately, the user manual for the 9100 isn't there. Sigh... Chris (I would like a copy of the scipt also :) ______________________________ Reply Separator _________________________________ Subject: RE: Fluke T-shooters Author: John Robertson <jrr(a)flippers.com> at Internet Date: 1/11/00 8:40 AM I found the Asteroids script, had downloaded it a while ago and it was lurking in the wrong area. Would anyone like a copy? John :-#)#

6 15

A quick apology and questions about debuging Cloak & Dagger boards with a fluke 9010
by David Shoemaker 31 Mar '05

31 Mar '05

2 1

Micro Concepts BoardWalker 103
by Tom Leffingwell 31 Aug '04

31 Aug '04

I recently happened across a BoardWalker 103, I don't suppose anyone has a manual for it? It is missing the test clip unfortunately. Does anyone know the difference between the 103 and 101? I was hoping to build a replacement test clip as well if I could get pinout information on the test clip connector. There are more pins on the test clip connector than there are holes in the ZIF socket, so I'm not exactly sure what's going on. Anyway, any info is greated appreciated, as I know very little about it. Thanks, -Tom If you ever want to (un)subscribe yourself with TTL, you can send mail to: <Majordomo(a)flippers.com> with the following command in the body of your email message: (un)subscribe techtoolslist or from another email account, besides xxx(a)yyy.com: (un)subscribe techtoolslist xxx(a)yyy.com

1 0

Pod pins
by Phil Morris 14 Aug '04

14 Aug '04

What's the recommended/best way to replace broken pins on the main CPU plug on a pod? Pin 40 on my 6502 pod has just broken off (still seems to work fine though and passes the Bus Test). I have in fact been using a 'sacrificial socket' to try and avoid this, but this just came off and bent the pin so badly that it broke off. It's broken off too close to the plastic to realistically attach another pin. Ta, Phil If you ever want to (un)subscribe yourself with TTL, you can send mail to: <Majordomo(a)flippers.com> with the following command in the body of your email message: (un)subscribe techtoolslist or from another email account, besides xxx(a)yyy.com: (un)subscribe techtoolslist xxx(a)yyy.com

2 1