June 2011 - TechToolsList - listserv.classicarcade.com

Fluke 9000A mystery adapter (for me at least ;-)
by John Robertson 20 Feb '18

20 Feb '18

I have a pod module here called "Z8 I/F ADAPTER" Fluke #9000-200/AB. It has no cable to the base, just a 40 pin CPU cable. Inside is a couple of RAM chips, and some Fluke hybrid interface ICs. Any guesses? John :-#)#

3 7

Any Taito Bench Tester documentation available?
by James Marous 04 Feb '14

04 Feb '14

6 15

Re: Cracking the 9010A ROM signature generator
by Kev 02 Feb '13

02 Feb '13

2 3

Fluke 9000a-8051 Manual
by Ed Osborne 10 Sep '12

10 Sep '12

7 14

B&K CRT rejuvenator adapters
by Andrew Welburn 23 Jun '11

23 Jun '11

hi all.. I have a B&K 490 and wanted to make up an adapter for a G05 tube i need to test out, i don't have the right adapter but i do have a spare CRT neck socket from an old harness. Thing is, can't really find any pinouts online anywhere, am i missing something? I know i can work the pinouts out from looking up tubes datasheets but its a lot of hassle.. I wondered if someone had already seen this info around? -- Andrew Welburn http://www.andys-arcade.com _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 3

FLUKE 9010a option 006 software
by AL SACCO_hm 19 Jun '11

19 Jun '11

looking for tape data for fluke 9010a 006 async software...... software to setup clock module.... thanks from AL SACCO _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 1

Re: [Techtoolslist] Intersil 5610 (32x8 prom)
by Martin White 16 Jun '11

16 Jun '11

Sorry, this message won't be threaded properly as I'm on the wrong computer at the moment. Anyway, just thought I'd update on the results of this. Response back from Dataman is that they cant support the IM56xx range of proms as they need 28v VPP and the DAC in the programmer only goes up to 26v. They could make a hardware adapter but obviously they're not going to just for one equivalent make of one series of chip. So that covers: Dataman 48Pro+ BK Precision 866B Elnec Beeprog+ They're all the same programmer badged by different people. I'm guessing this likely applies to other programmers in their respective ranges, and there may also be other companies badging the same programmer. So, that completes that then :) Now starts the hunt for someone in the UK that wants to trade chips. Martin. _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 1

Intersil 5610 (32x8 prom)
by Martin White 08 Jun '11

08 Jun '11

Hi all, I think this has come up before, so I guess the answer is no but I figured I'd try again anyway. Does anyone have the programming info for the Intersil 5610 please? By that, I mean the actual documentation, rather than the device ID for the Data I/O 29B (which I have found courtesy of John). My programmer, the Dataman 48 Pro+ supports the 82S123 by Philips / Signetics but not the Intersil 5610. Dataman are pretty good and will add support for a "new" device provided you send in samples and info. I've been in touch and explained that I can't really spare the samples as I only have 6 left (and they're OTP) so they've kindly said they'll at least have a nose for me if I can send in the info. So far I've just mailed in the datasheet for the 82S123 and the 5610 but I suspect that wont be anything like enough. I suspect they'll need the programming reference too. Thanks, Martin. _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 2

Re: [Techtoolslist] Intersil 5610 (32x8 prom)
by teeray 07 Jun '11

07 Jun '11

Has anyone tried programming the Intersil IM5610 with programmer set to Harris HM7603 ? -----Original Message----- >From: Martin White <martin(a)guddler.co.uk> >Sent: Jun 1, 2011 8:22 PM >To: Technical Tools Mail List <techtoolslist(a)flippers.com> >Subject: [Techtoolslist] Intersil 5610 (32x8 prom) > >Hi all, > >I think this has come up before, so I guess the answer is no but I figured I'd try again anyway. > >Does anyone have the programming info for the Intersil 5610 please? By that, I mean the actual documentation, rather than the device ID for the Data I/O 29B (which I have found courtesy of John). > >My programmer, the Dataman 48 Pro+ supports the 82S123 by Philips / Signetics but not the Intersil 5610. Dataman are pretty good and will add support for a "new" device provided you send in samples and info. I've been in touch and explained that I can't really spare the samples as I only have 6 left (and they're OTP) so they've kindly said they'll at least have a nose for me if I can send in the info. > >So far I've just mailed in the datasheet for the 82S123 and the 5610 but I suspect that wont be anything like enough. I suspect they'll need the programming reference too. > >Thanks, >Martin. >_______________________________________________ >Techtoolslist mailing list >Techtoolslist(a)flippers.com >http://seven.pairlist.net/mailman/listinfo/techtoolslist >FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment >Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 1