November 2010 - TechToolsList - listserv.classicarcade.com

Fluke 9000A mystery adapter (for me at least ;-)
by John Robertson 20 Feb '18

20 Feb '18

I have a pod module here called "Z8 I/F ADAPTER" Fluke #9000-200/AB. It has no cable to the base, just a 40 pin CPU cable. Inside is a couple of RAM chips, and some Fluke hybrid interface ICs. Any guesses? John :-#)#

3 7

Any Taito Bench Tester documentation available?
by James Marous 04 Feb '14

04 Feb '14

6 15

Re: Cracking the 9010A ROM signature generator
by Kev 02 Feb '13

02 Feb '13

2 3

Fluke 9000a-8051 Manual
by Ed Osborne 10 Sep '12

10 Sep '12

7 14

FLUKE 9100A SERIES QUESTION
by AL SACCO_hm 30 Nov '10

30 Nov '10

HELP FOR FLUKE 9100 USER Need some help on an issue that has happened during power up on multiple Fluke 9100a or ft units that I tested.... if no pod is attached to 9100 during it comes up "no pod connected"..... if any pod is attached it comes up "enabled line caused timeout" any idea or help would be helpful..... AL SACCO _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

6 9

Re: [Techtoolslist] FLUKE 9100A SERIES QUESTION
by AL SACCO 29 Nov '10

29 Nov '10

Thanks for the help. !!!!! . "martin(a)guddler.co.uk" <martin(a)guddler.co.uk> wrote: >Al, > >Do you have the ribbon cable in the test socket? If so, this is normal behavior. > >Martin. > >Sent from my iPhone > >On 29 Nov 2010, at 02:34, "AL SACCO_hm" <asacco007(a)hotmail.com> wrote: > >> HELP FOR FLUKE 9100 USER >> >> Need some help on an issue that has happened during power up on multiple Fluke 9100a or ft units that I tested.... >> if no pod is attached to 9100 during it comes up "no pod connected"..... >> if any pod is attached it comes up "enabled line caused timeout" >> any idea or help would be helpful..... >> >> AL SACCO >> _______________________________________________ >> Techtoolslist mailing list >> Techtoolslist(a)flippers.com >> http://seven.pairlist.net/mailman/listinfo/techtoolslist >> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ >_______________________________________________ >Techtoolslist mailing list >Techtoolslist(a)flippers.com >http://seven.pairlist.net/mailman/listinfo/techtoolslist >FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment >Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ > _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

Re: [Techtoolslist] FLUKE 9100A SERIES QUESTION
by AL SACCO 29 Nov '10

29 Nov '10

I only attached pods when power was off .... John Robertson <jrr(a)flippers.com> wrote: >AL SACCO_hm wrote: >> HELP FOR FLUKE 9100 USER >> >> Need some help on an issue that has happened during power up on multiple Fluke 9100a or ft units that I tested.... >> if no pod is attached to 9100 during it comes up "no pod connected"..... >> if any pod is attached it comes up "enabled line caused timeout" >> any idea or help would be helpful..... >> >> AL SACCO >> _______________________________________________ >> > >As I recall you can't hook up a pod while the power is on, only when off... > >John :-#)# > >-- >John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 >Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) > www.flippers.com >"Old pinballers never die, they just flip out" > >_______________________________________________ >Techtoolslist mailing list >Techtoolslist(a)flippers.com >http://seven.pairlist.net/mailman/listinfo/techtoolslist >FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment >Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ >

1 0