September 2010 - TechToolsList - listserv.classicarcade.com

Fluke 9000A mystery adapter (for me at least ;-)
by John Robertson 20 Feb '18

20 Feb '18

I have a pod module here called "Z8 I/F ADAPTER" Fluke #9000-200/AB. It has no cable to the base, just a 40 pin CPU cable. Inside is a couple of RAM chips, and some Fluke hybrid interface ICs. Any guesses? John :-#)#

3 7

Any Taito Bench Tester documentation available?
by James Marous 04 Feb '14

04 Feb '14

6 15

Re: Cracking the 9010A ROM signature generator
by Kev 02 Feb '13

02 Feb '13

2 3

Fluke 9000a-8051 Manual
by Ed Osborne 10 Sep '12

10 Sep '12

7 14

Fluke 90 Series Manuals
by Matt Rossiter 29 Oct '10

29 Oct '10

Does anyone happen to know if these are available online somewhere? I have them and I'm just wondering if I should scan them in. The two I have are: 1) 90 Series uP Board Tester - User's Manual 2) Quicktools for the IBM PC - User's Manual Matt _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

4 6

Data I/O 29B
by Kevin Moore 06 Sep '10

06 Sep '10

I've got a Data I/O with a Unipak. The unit seems to function correctly, but I seem to have a problem loading prom files for tempest. I'm able to load files for say 2516, or 2532. It's bit slow, but it loads (in about 30 secs) and I'm able to burn them. But when I try to load any prom file the program states that it's waiting for programmer response (normal for even the 2516 etc. ) But it either never get's a response, or the file is so small that it loaded to quickly and the program missed the response? I've let it sit for 10 mins waiting and nothing. It would be nice to be able to load a file, instead of having to copy from a master prom. Not sure what's going on. Any ideas that I could try would be apperciated. Thanks, Kevin _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 6

need docs for AMD LabPro (Digelec) Programmer -
by Jack Rubin 03 Sep '10

03 Sep '10

A recent hamfest yielded a beautiful AMD LabPro Digelec PLD programmer, along with PALASM software and several pounds of programmable devices. The only thing lacking are docs for operating the programmer. It's reasonably self explanatory in local mode but I'd like to figure out how to connect with a PC to allow file transfers to and from the device. Anybody have the docs? Thanks, Jack _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

HC11 pod for Fluke?
by John Robertson 02 Sep '10

02 Sep '10

Anyone have any info on the adapter #9000A-68HC11PA1? This apparently allows one to check the HC11 based systems using some pod of other... John :-#)# -- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out" _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0