August 2008 - TechToolsList - listserv.classicarcade.com

Fluke 9000A mystery adapter (for me at least ;-)
by John Robertson 20 Feb '18

20 Feb '18

I have a pod module here called "Z8 I/F ADAPTER" Fluke #9000-200/AB. It has no cable to the base, just a 40 pin CPU cable. Inside is a couple of RAM chips, and some Fluke hybrid interface ICs. Any guesses? John :-#)#

3 7

Any Taito Bench Tester documentation available?
by James Marous 04 Feb '14

04 Feb '14

6 15

Re: Cracking the 9010A ROM signature generator
by Kev 02 Feb '13

02 Feb '13

2 3

Fluke 9000a-8051 Manual
by Ed Osborne 10 Sep '12

10 Sep '12

7 14

Fluke 90 Series Manuals
by Matt Rossiter 29 Oct '10

29 Oct '10

Does anyone happen to know if these are available online somewhere? I have them and I'm just wondering if I should scan them in. The two I have are: 1) 90 Series uP Board Tester - User's Manual 2) Quicktools for the IBM PC - User's Manual Matt _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

4 6

Fluke 9010a Troubleshooting w/ Omega Race
by Matt Rossiter 13 Sep '08

13 Sep '08

This might be more of a Vectorlist question, but I thought I might try here. Right now I'm using a 100% working Omega Race boardset to make sure I have the correct setup using the Fluke 9010a and Z80 Pod. First of all, the boardset just won't run with the Z80 Pod. I can see that the Reset line is pulsing. It won't run if I disable the watchdog circuit either. *sometimes* I can get it to do a Quick Ram Test successfully. Other times I get data error messages and if I do a bus test it will report a bunch of data lines tied together. Of course, if I put a normal z80 processor back in the game works perfectly fine. So, I'm just wondering if anyone out there knows how to properly setup an Omega Race boardset for troubleshooting with the Fluke 9010a and Z80 pod. This Pod should be working fine since I used it recently on a Pac-Man. thanks Matt _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

4 9

Tektronix 1230 Logic Analyzer video
by Matt Rossiter 29 Aug '08

29 Aug '08

This is a pretty cheezy but helpful quicktime video on operating the Tektronix 1230 Logic Analyzer. http://games.rossiters.com/photos/main.php?g2_itemId=3502 [1] Enjoy... Matt Links: ------ [1] http://games.rossiters.com/photos/main.php?g2_itemId=3502 _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

1 0

Ping: trollian aka XY-Man_at_pyramidm.demon.co.uk aka B. D'Oliveira aka aztarac@ukvac.org.uk
by John Robertson 17 Aug '08

17 Aug '08

Well, sort of a lost cause but trying to track this fellow down as he seems to be the only person on the planet with copies of the Atari Pinball Test Fixture overlay cards....I've been trying to get a copy for over ten years from whoever has a set, but have turned up nothing - however wandering through my email I find that XY-Man had these and we had talked about them back in '99. So, yup, a long shot, but figured someone might know this fellow - he lives(d) in Atherton, UK... John :-#)# -- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out" _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

3 2