Hi all!
I bought a Fluke 9110FT setup and with that setup came the SPECTRUM-TX diskettes which I now have imaged and uploaded to the "/TTL/Test_Equipment/Fluke/9100 Series" folder on John's FTP site.
Inside the ZIP archive is a ReadMe with more details about the images etc. I haven't tested the images myself but I think they should probably work as the original diskettes was error free.
Enjoy!
/Martin!
_______________________________________________
Techtoolslist mailing list
Techtoolslist(a)flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Hello all,
I'm looking to trade a working American Reliance AR-90LMC TTL & CMOS logic
comparator / monitor. This can handle devices up to 28 pins. It is nearly
complete (cable, 16 & 28 pin clips, ground cable, device pin overlays,
quick start sheets), only missing the manual- but I've uploaded a copy to
the TTL FTP site. I've found this device is fairly sensitive, even at the
longest detectable glitch levels, which can be a bit annoying. Still, I've
found it useful, finding bad RAM on CCPU boards and the 28 channel logic
monitor is quite helpful as well. Right now I am only looking to trade it
for a Bugtrap 2074A, or if you've got a complete and working Fluke 900
Dynamic Troubleshooter you want to get rid of, I can throw in $$$. Please
contact me off list.
_______________________________________________
Techtoolslist mailing list
Techtoolslist(a)flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
