May 2020 - TechToolsList - listserv.classicarcade.com

Fluke 9110FT SPECTRUM-TX diskettes imaged
by Martin Olsson 10 May '23

10 May '23

Hi all! I bought a Fluke 9110FT setup and with that setup came the SPECTRUM-TX diskettes which I now have imaged and uploaded to the "/TTL/Test_Equipment/Fluke/9100 Series" folder on John's FTP site. Inside the ZIP archive is a ReadMe with more details about the images etc. I haven't tested the images myself but I think they should probably work as the original diskettes was error free. Enjoy! /Martin! _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

6 14

ftp site is down...
by John Robertson 23 Dec '22

23 Dec '22

Does anyone know Tim Matthews (in the UK) and can ask him if he is aware his web site arcadetech.org is down? He is hosting the TTL library (I have a complete archive of course) and I noticed it was down when I tried to upload some files yesterday. I sent him an email but did not hear back. The domain is listed as active until 2020 so it must be a server thing... Thanks! John :-#)# -- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

12 27

ADDR ERROR @ XXXXh - LOOP?
by John Robertson 24 Mar '21

24 Mar '21

And here is a new one for me, don't recall seeing that error message before, nor can I find reference to it in the 9010A Operator Manual. Pressing the MORE key gives me "ADDR BITS 0100 - LOOP?" so I assumed this was some sort of a decode issue and will proceed accordingly. Just thought I would post it here in case anyone else runs across this rare error message which I assume was added to the 3A ROMs in the 9010, but not to the manual - at least the copy I have... (later) It was indeed a problem with some address lines. For only A7 and A8 when loop reading @ 0000 (easiest - all should be Low) with the 9010 probe (set to Address) the Low light was flickering, not steady Low. Turned out to be a 74LS367 that had two inputs that were somehow pulling the lines slightly high. This did not show up when doing a ROM or BUSS test - only in either of the RAM tests. FYI John :-#)# -- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 2

Fluke demo trainer
by Marc Desfossés 12 Aug '20

12 Aug '20

Hi, Has anyone in this group ever tried the Fluke 9000a-010 demo trainer unit ? It seems like a good way to learn the 9100 functionalities. I'd be curious to get your feedback. Thanks ! Marc _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

4 4