November 2007 - TechToolsList - listserv.classicarcade.com

Fluke 9000A mystery adapter (for me at least ;-)
by John Robertson 20 Feb '18

20 Feb '18

I have a pod module here called "Z8 I/F ADAPTER" Fluke #9000-200/AB. It has no cable to the base, just a 40 pin CPU cable. Inside is a couple of RAM chips, and some Fluke hybrid interface ICs. Any guesses? John :-#)#

3 7

Any Taito Bench Tester documentation available?
by James Marous 04 Feb '14

04 Feb '14

6 15

Re: Cracking the 9010A ROM signature generator
by Kev 02 Feb '13

02 Feb '13

2 3

Fluke 9000a-8051 Manual
by Ed Osborne 10 Sep '12

10 Sep '12

7 14

Fluke 90 Series Manuals
by Matt Rossiter 29 Oct '10

29 Oct '10

Does anyone happen to know if these are available online somewhere? I have them and I'm just wondering if I should scan them in. The two I have are: 1) 90 Series uP Board Tester - User's Manual 2) Quicktools for the IBM PC - User's Manual Matt _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

4 6

Fluke 9010a Troubleshooting w/ Omega Race
by Matt Rossiter 13 Sep '08

13 Sep '08

This might be more of a Vectorlist question, but I thought I might try here. Right now I'm using a 100% working Omega Race boardset to make sure I have the correct setup using the Fluke 9010a and Z80 Pod. First of all, the boardset just won't run with the Z80 Pod. I can see that the Reset line is pulsing. It won't run if I disable the watchdog circuit either. *sometimes* I can get it to do a Quick Ram Test successfully. Other times I get data error messages and if I do a bus test it will report a bunch of data lines tied together. Of course, if I put a normal z80 processor back in the game works perfectly fine. So, I'm just wondering if anyone out there knows how to properly setup an Omega Race boardset for troubleshooting with the Fluke 9010a and Z80 pod. This Pod should be working fine since I used it recently on a Pac-Man. thanks Matt _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

4 9

Fluke pod cables (related to 6502 pod)
by David Shoemaker 27 May '08

27 May '08

4 4

Fluke 9100A Keyboard Needed
by Mark Hooks 05 Dec '07

05 Dec '07

I'm trying to set up my 9100A to do some programming but I can't find a Keyboard for it. I have everythig else I need. If you have a spare youre willing to sell please let me know. I have a lot of pods and the like for trade as well (6800, 6802, 8080, 8085, 8086, 9132, probe, etc.). Mark Hooks 888-261-8265 _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

2 1

Data I/O 29B on XP?
by Joseph Magiera 30 Nov '07

30 Nov '07

Can anyone confirm that they can interface with a Data I/O 29B using a PC running Windows XP? I finally am going to try to get my Data I/O going, and I plan on using a Pentium III, 500mg PC, loaded with Windows XP. A pretty unpowerful computer by today's standard, but should be plenty for running the Data I/O software (if it can indeed work on XP). Any tips or tricks to note on installing/running? Thanks, Joe joemagiera(a)ameritech.net _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

10 16