March 2010 - TechToolsList - listserv.classicarcade.com

Fluke 9000A mystery adapter (for me at least ;-)
by John Robertson 20 Feb '18

20 Feb '18

I have a pod module here called "Z8 I/F ADAPTER" Fluke #9000-200/AB. It has no cable to the base, just a 40 pin CPU cable. Inside is a couple of RAM chips, and some Fluke hybrid interface ICs. Any guesses? John :-#)#

3 7

Any Taito Bench Tester documentation available?
by James Marous 04 Feb '14

04 Feb '14

6 15

Re: Cracking the 9010A ROM signature generator
by Kev 02 Feb '13

02 Feb '13

2 3

Fluke 9000a-8051 Manual
by Ed Osborne 10 Sep '12

10 Sep '12

7 14

Fluke 90 Series Manuals
by Matt Rossiter 29 Oct '10

29 Oct '10

Does anyone happen to know if these are available online somewhere? I have them and I'm just wondering if I should scan them in. The two I have are: 1) 90 Series uP Board Tester - User's Manual 2) Quicktools for the IBM PC - User's Manual Matt _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

4 6

9100 keyboard...
by John Robertson 13 Mar '10

13 Mar '10

Well, a long time ago several of us were trying to make an adapter so we could use a PC compatable keyboard with our programmable 9100's - but never finished the job...Tom Gudder did and has bared all on his web page: http://www.guddler.co.uk/f9100/9100key.html Thanks Martin! John :-#)# -- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 5

Fluke 9010a Software Revs
by Kevin Moore 08 Mar '10

08 Mar '10

What's the differences between V 2B and V 3A on the fluke 9010a? I just got a Fluke with 3A and if it's better I would like to upgrade all my Flukes. Or is there a need to hold onto 2B? Thanks, Kevin _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

Interest in a 9100A setup?
by James Bright 07 Mar '10

07 Mar '10

Is there interest in a full 9100A setup? I have a set up here that could probably go to a better home. Keyboard, main unit, I/O module, etc. I have a monitor, but that might be a bit expensive to ship. LMK. Thanks. JB _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 2

9100FT flukes...
by Andrew Welburn 03 Mar '10

03 Mar '10

hi all.. Has anyone looked into what the differences are between the 9100FT and the regular 9100A ? I'm stuck with a 9100A and i've seen a video of the speed of an FT and the green eyed monster got me. Does anyone know what the differences are between them? can't be much surely? I'd love it if it just meant swapping xtals and cpu's :-) any ideas? Andrew Welburn www.andys-arcade.com _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 1

6803 CPU - Fluke 9010/9100 update
by John Robertson 02 Mar '10

02 Mar '10

I just got off the phone chatting with Shy of Navatek and, as usual, he was most helpful. I asked about the Fluke 6803 adapter for the 6802 pod and he turns out to be the designer! Says he has the information around somewhere and is happy to send it along so once it arrives I will let folks know and post any schematics to Flippers FTP site (with Shy's permission granted). Shy's contact info (9100 and 9010 parts, repairs, etc. he bought up Flukes stock when they discontinued the series): shy(a)navatek.com Shy Meirovitch Navatek 20331 Lake Forest Dr Suite C-16 Lake Forest CA 92630 (949) 588-2121 John :-#)# -- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out" _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 4