November 2008 - TechToolsList - listserv.classicarcade.com

Fluke 9000A mystery adapter (for me at least ;-)
by John Robertson 20 Feb '18

20 Feb '18

I have a pod module here called "Z8 I/F ADAPTER" Fluke #9000-200/AB. It has no cable to the base, just a 40 pin CPU cable. Inside is a couple of RAM chips, and some Fluke hybrid interface ICs. Any guesses? John :-#)#

3 7

Any Taito Bench Tester documentation available?
by James Marous 04 Feb '14

04 Feb '14

6 15

Re: Cracking the 9010A ROM signature generator
by Kev 02 Feb '13

02 Feb '13

2 3

Fluke 9000a-8051 Manual
by Ed Osborne 10 Sep '12

10 Sep '12

7 14

Fluke 90 Series Manuals
by Matt Rossiter 29 Oct '10

29 Oct '10

Does anyone happen to know if these are available online somewhere? I have them and I'm just wondering if I should scan them in. The two I have are: 1) 90 Series uP Board Tester - User's Manual 2) Quicktools for the IBM PC - User's Manual Matt _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

4 6

Re: [Techtoolslist] Fluke 900 dynamic trouble shooter
by John Robertson 29 Nov '08

29 Nov '08

Hi Steve, Got the email, but I am going on vacation for a week and won't be able to dig it out before I go. Remind me in a week or so... John :-#)# mail(a)nessandsteve.plus.com wrote: > That sounds good to me. > I have sent you an email. > Steve > > >> Backflipper wrote: >> >>> Not to be confused with the dedicated CPU testers similar to the 9010a. >>> >>> I have one and it is displaying failures on boot up, so I have been >>> putting together my notes on what I have found as there is no service >>> manual available. Is anybody else interested in this information, does >>> anybody else have one that can send me details on the fault report they >>> have? >>> >>> I know a few people out there have had one infact someone posted on here >>> a few months back with one but I couldn't get in touch, Bill if you are >>> still out there can you get in touch. >>> >>> Cheers >>> Steve >>> >>> >> I have a 900 that is simply collecting dust - no manuals though. If you >> can use it get in touch with me. It seems to have a problem with memory >> as I recall, but I haven't turned it on in many years... >> >> John :-#)# >> >> -- >> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 >> Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) >> www.flippers.com >> "Old pinballers never die, they just flip out" >> >> >> > > > > > -- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out"

1 0

Fluke 900 dynamic trouble shooter
by Backflipper 29 Nov '08

29 Nov '08

Not to be confused with the dedicated CPU testers similar to the 9010a. I have one and it is displaying failures on boot up, so I have been putting together my notes on what I have found as there is no service manual available. Is anybody else interested in this information, does anybody else have one that can send me details on the fault report they have? I know a few people out there have had one infact someone posted on here a few months back with one but I couldn't get in touch, Bill if you are still out there can you get in touch. Cheers Steve _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 3

Dataman omnipro II eprom programmer
by Backflipper 27 Nov '08

27 Nov '08

Any of you good folk out there got a bipolar prom module for this? Thanks in advance. Cheers Steve _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

Fluke Z80AA won't run Midway Boards
by Mark Hooks 01 Nov '08

01 Nov '08

My Pod Passes self test, yet it won't run a fully working Pac man board. I've tried it using the run UUT defaults. Am I missing something on the setup, or do I have a pod error? I notice it doesn't pass the buss test either. I get numerous data bit tied low errors. When I loop them, it flips back and forth between Tied Low and OK. Mark Hooks _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 1

Looking for info on OLD HP 1600A Logic State Analyzer
by kevin spears 01 Nov '08

01 Nov '08

I know this is an ancient boat anchor and probably not worth fooling with, but I couldn't pass it up for $15. It came with (only) one 6-bit input module, but thankfully it appears that the pods are cheap and plentiful for these. (The lack of which was the main reason I gave up on the Tek DAS9100 I've had for many years!) I'm not having much luck finding any documentation for it, however. I've found a few application notes on the agilent site and an advertising announcement on an HP user's site, but that's about it. I know this is a longshot, but would anyone happen to know of a scanned manual for this beast? _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0