August 2020 - TechToolsList - listserv.classicarcade.com

Fluke 9110FT SPECTRUM-TX diskettes imaged
by Martin Olsson 10 May '23

10 May '23

Hi all! I bought a Fluke 9110FT setup and with that setup came the SPECTRUM-TX diskettes which I now have imaged and uploaded to the "/TTL/Test_Equipment/Fluke/9100 Series" folder on John's FTP site. Inside the ZIP archive is a ReadMe with more details about the images etc. I haven't tested the images myself but I think they should probably work as the original diskettes was error free. Enjoy! /Martin! _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

6 14

ftp site is down...
by John Robertson 23 Dec '22

23 Dec '22

Does anyone know Tim Matthews (in the UK) and can ask him if he is aware his web site arcadetech.org is down? He is hosting the TTL library (I have a complete archive of course) and I noticed it was down when I tried to upload some files yesterday. I sent him an email but did not hear back. The domain is listed as active until 2020 so it must be a server thing... Thanks! John :-#)# -- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

12 27

ADDR ERROR @ XXXXh - LOOP?
by John Robertson 24 Mar '21

24 Mar '21

And here is a new one for me, don't recall seeing that error message before, nor can I find reference to it in the 9010A Operator Manual. Pressing the MORE key gives me "ADDR BITS 0100 - LOOP?" so I assumed this was some sort of a decode issue and will proceed accordingly. Just thought I would post it here in case anyone else runs across this rare error message which I assume was added to the 3A ROMs in the 9010, but not to the manual - at least the copy I have... (later) It was indeed a problem with some address lines. For only A7 and A8 when loop reading @ 0000 (easiest - all should be Low) with the 9010 probe (set to Address) the Low light was flickering, not steady Low. Turned out to be a 74LS367 that had two inputs that were somehow pulling the lines slightly high. This did not show up when doing a ROM or BUSS test - only in either of the RAM tests. FYI John :-#)# -- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 2

FS working Tektronix 454
by Art 22 Aug '20

22 Aug '20

Working, clean, no probes, $90 picked up zip 12118. Will ship, $110 plus actual UPS ground charges, scope supposedly weighs around 30#, boxed weight 34# 24x12x16 inches pics available Art _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

Tektronix scope part out spree
by Art 22 Aug '20

22 Aug '20

Junking Tek scopes 2 - 7704 1 - 7704A 1 - 7403 1 - 5301 1 - 7834 1 - 7433 1 - 7423 The 7704A and the 7834 worked fine until I put bad vertical amp (7A26) plugins in them - plugins smoked, trace disappeared. The 7704s had, IIRC, reduced width and height traces that hung in the lower left corner. Also have a 7423 and 7433 that sort of work - triggering and locking issues - waveform floats horizontally. I have no interest in shipping complete scopes. If anyone wants the lot of 8, $325 picked up in 12118 - the 7704A is pretty much disassembled, the others are intact. Power supplies are good in the 5301, 7704A, and one of the 7704s, and of course the 2 small 3 slot scopes. Art _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

Dynatec 256 DI programmer
by Art 22 Aug '20

22 Aug '20

Picked one up the other day with a batch of Tektronix stuff - untested, looks clean and happy. Looking for offers, can send pics. Art - From NY _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

Fluke demo trainer
by Marc Desfossés 12 Aug '20

12 Aug '20

Hi, Has anyone in this group ever tried the Fluke 9000a-010 demo trainer unit ? It seems like a good way to learn the 9100 functionalities. I'd be curious to get your feedback. Thanks ! Marc _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

4 4

Fluke 9100ft + Keyboard + Monitor + Probe + Vector I/O Module
by Steve Larkins 07 Aug '20

07 Aug '20

Hey list I hope you are all well. I thought I would offer this up on here before I put it online. What I could do with is a valuation on this bundle and see if there is any interest. I am in the UK but I can box this up into 3 parcels and ship internationally if needed. Thanks _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

7 13

Valuations on an ABI Boardmaster 4000
by Steve Larkins 07 Aug '20

07 Aug '20

Hi list Sorry for posting mostly for sale threads at the moment but I am having a clear out. Can anyone advise on what I should ask for one of these? It is complete with the accessory bag containing the leads and logic clips. I will add some photos tonight when I get it together. Cheers _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 1

Bytek 135h PC Software?
by techtools-steve 01 Aug '20

01 Aug '20

Would anyone happen to have the PC software for a Bytek 135h ? I have been trying to organize things and found this gem in one of many boxes in storage. _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0