Hi,
I recently acquired a TK-80A board via Ebay. A label on the back of the board
seems to indicate that it was part of a Fluke 9010A training set, as referenced
in the 'Introductory Training' manual.
The EPROM on my board did not work properly.
But a friend from Japan sent me the original content of the EPROM.
Now the board is working again and I get the signature F77C for the ROM as
mentioned in the training manual.
I can provide some pictures if somebody is interested.
Best
Manfred
_______________________________________________
Techtoolslist mailing list
Techtoolslist(a)flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site 2005-Current: https://seven.pairlist.net/pipermail/techtoolslist/
Vectorlist Archives 1997/99 - 2016: https://www.vectorlist.org/
