Have a suspect bad pallet ram on Missile Command, and I see that it is on
the CPU memory map so I should be able to get to it from the fluke.
Now it is only 4 bits wide (and only uses 8 addresses) so I can just do it
manually but I have seen this on other boards before and never could find a
way to use the fluke to test these 4 bit rams.
Would also assume it could be a problem for 68000 based boards which use
16bit wide memory.
David
_______________________________________________
Techtoolslist mailing list
Techtoolslist(a)flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
