July 2012 - TechToolsList - listserv.classicarcade.com

Re: [Techtoolslist] Fluke on Mario Bros.
by David Shoemaker 20 Apr '18

20 Apr '18

Looking at the manual for the Z80QT pod and the schematic I think I am getting an expected result. I hooked up the pod and hit BUS to run the bus test. I immediately get back CTL ERR showing 00000010 this is the HALT line. Looking at the schematic it appears HALT and INT are both tied together and pulled high. So the fluke can't exercise that line. Any way to ignore that error and verify the rest of the bus test? Oh and according the manual maximum clock frequency is 8.0 mhz. Does that mean this pod support Z80A/B/C ? From: David Shoemaker [mailto:davids@oz.net] Sent: Wednesday, November 16, 2011 10:38 PM To: 'Technical Tools Mail List' Subject: Fluke on Mario Bros. Anyone know if you can use either the base z80 pod or the z80qt pod on Mario bros? I know it uses the Z80A but I don't know what the pod is rated at. Thanks, David _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

4 7

Fluke 9000A mystery adapter (for me at least ;-)
by John Robertson 20 Feb '18

20 Feb '18

I have a pod module here called "Z8 I/F ADAPTER" Fluke #9000-200/AB. It has no cable to the base, just a 40 pin CPU cable. Inside is a couple of RAM chips, and some Fluke hybrid interface ICs. Any guesses? John :-#)#

3 7

Any Taito Bench Tester documentation available?
by James Marous 04 Feb '14

04 Feb '14

6 15

Re: Cracking the 9010A ROM signature generator
by Kev 02 Feb '13

02 Feb '13

2 3

Fluke 9000a-8051 Manual
by Ed Osborne 10 Sep '12

10 Sep '12

7 14

Code Ice 040 Info?
by Kurt Mahan 28 Jul '12

28 Jul '12

I recently acquired an Applied Microsystems Code Ice 040 (68040) unit. Anyone have a manual/software/info? There doesn't seem to be any archives for Applied Microsystems ICE products that google can find. Thanks! --Kurt _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

Re: [Techtoolslist] 9010 training videos?
by David Shoemaker 21 Jul '12

21 Jul '12

Hope Franklin doesn't pay by the byte.... I am also pulling them down. I already had the PDF's just not the videos. Thanks, David -----Original Message----- From: techtoolslist-bounces(a)flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of Jack Rubin Sent: Sunday, March 18, 2012 7:16 PM To: 'Technical Tools Mail List' Subject: Re: [Techtoolslist] 9010 training videos? Thanks - sucking them down now! Jack > -----Original Message----- > From: techtoolslist-bounces(a)flippers.com [mailto:techtoolslist- > bounces(a)flippers.com] On Behalf Of Franklin(a)Bowen.net > Sent: Sunday, March 18, 2012 7:02 PM > To: c.cowgill(a)comcast.net; Technical Tools Mail List > Cc: Technical Tools Mail List > Subject: Re: [Techtoolslist] 9010 training videos? > > http://fmbbowen.com/VideoGames/Fluke9010_Training/ > > -- > My generic signature > > On Mar 18, 2012, at 19:53, "Clay Cowgill" <c.cowgill(a)comcast.net> > wrote: > > > Found mine-- Mark @ basementarcade did them. (I was thinking of the > manuals > > DVD's from David before.) > > > > I can upload the MPEGs. (Can't imagine anyone wants RealVideo format > > anymore?!?) > > > > -Clay > > > > _______________________________________________ > > Techtoolslist mailing list > > Techtoolslist(a)flippers.com > > http://seven.pairlist.net/mailman/listinfo/techtoolslist > > FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment > > Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ > _______________________________________________ > Techtoolslist mailing list > Techtoolslist(a)flippers.com > http://seven.pairlist.net/mailman/listinfo/techtoolslist > FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment > Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2012.0.1913 / Virus Database: 2114/4878 - Release Date: > 03/18/12 _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

5 5

PLIP programing
by Kevin Moore 20 Jul '12

20 Jul '12

Ok, well this a bit reaching. But I've got a BK575a and a BK570 IC digital, and linear testers. Recently purchased the AK57x software package to program my own chip tests. The software used is PLIP PremierLink ic Programming.Packaged under Compactlink. I'm wondering if any one has any experience with this type of programming language, or might know of any resources. The two users/mfgs of this software have been as of yet unhelpful. The software does come with a manual, with minimal information on programming 10 pages. Kevin _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

(no subject)
by kevin spears 17 Jul '12

17 Jul '12

http://seasonspetsupplies.com/wp-admin/love.php?riding72.bmp _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 1