August 2009 - TechToolsList - listserv.classicarcade.com

Fluke 9000A mystery adapter (for me at least ;-)
by John Robertson 20 Feb '18

20 Feb '18

I have a pod module here called "Z8 I/F ADAPTER" Fluke #9000-200/AB. It has no cable to the base, just a 40 pin CPU cable. Inside is a couple of RAM chips, and some Fluke hybrid interface ICs. Any guesses? John :-#)#

3 7

Any Taito Bench Tester documentation available?
by James Marous 04 Feb '14

04 Feb '14

6 15

Re: Cracking the 9010A ROM signature generator
by Kev 02 Feb '13

02 Feb '13

2 3

Fluke 9000a-8051 Manual
by Ed Osborne 10 Sep '12

10 Sep '12

7 14

Fluke 90 Series Manuals
by Matt Rossiter 29 Oct '10

29 Oct '10

Does anyone happen to know if these are available online somewhere? I have them and I'm just wondering if I should scan them in. The two I have are: 1) 90 Series uP Board Tester - User's Manual 2) Quicktools for the IBM PC - User's Manual Matt _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

4 6

Fluke 900 dynamic troubleshooter
by Backflipper 25 Aug '09

25 Aug '09

Hello List, To all who have a Fluke 900 dynamic troubleshooter in need of repair I managed to get hold of the service manual for Ztest testmate which is what Fluke rebadged for the 900. I only received it in the last couple of minutes and have posted it here: http://sites.google.com/site/poachersrope/test-equipment/logic-testers/fluk… I will upload it to the ftp in a bit. One step closer to sorting this out :) Steve _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

Fluke 9010a RS-232 problem.
by Kevin Moore 23 Aug '09

23 Aug '09

First Hello all I'm new to the list :) Next my experience with the fluke is somewhat limited, but I'm learning quite a bit, and want to learn more. So this is what I have. Fluke 9101a, and a 6502 pod since I'm learning to work on Vector games. So far I've been able to do the normal stuff, Rom, and Ram checks manually. I downloaded the FIDE program from Quarter Arcade, and have it install on a Windows XP system. Next I'm using a 9pin serial cable with a Null modem adapter and a 9-25 pin adapter to connect it to the Fluke. I've set the dip switches on the Fluke for what I believe is default. 7n1 IIRC at 9600 baud. In anycase, I've got COM1 set the same in windows, and the FIDE program set the same. The one thing that confuses me is the Hardware control settings. Xon/Xoff etc. But what's happening when I try to transfer a program script to the fluke is this, set up the FIDE so it's ready. Press Aux/If, Read, Enter/Yes The fluke then will state receiving, but after 1-2 secs it will just reset. Then the Fluke states Reset Ok. I'm thinking it should stay in the receiving mode until the program is finished transfering, but like I said I'm still new at using the fluke. I've done a little troubleshooting of the RS-232 board, but since I don't have a probe at this time, and my manual program entry skills are lacking on the fluke, I've been unable to enter in the program to test the RS-232. I have confirmed that I have the +-6 volts. I'm sure there are some things I left out that you need to know so please ask away. Any suggestions would be much apperciated. Thanks, Kevin _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 3

Re: [Techtoolslist] Props to James Bright
by James Bright 03 Aug '09

03 Aug '09

NICE!! JB ---------------------------------------- From: "Adam Courchesne" <ajcrm125(a)gmail.com> Sent: Friday, July 03, 2009 9:09 AM To: "James Bright" <james(a)quarterarcade.com>, "Techtools List" <techtoolslist(a)flippers.com> Subject: Props to James Bright Giving some 'props' to James for his FIDE and in particular, his Fluke signature generation program.;) http://www.youtube.com/watch?v=FyHX7uQcUZM -- -Adam "Please don't judge my God by my inability to follow him" - Chris Mollins =============== www.onecircuit.com www.youtube.com/user/ajcrm125 =============== _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 2