December 2008 - TechToolsList - listserv.classicarcade.com

Fluke 9000A mystery adapter (for me at least ;-)
by John Robertson 20 Feb '18

20 Feb '18

I have a pod module here called "Z8 I/F ADAPTER" Fluke #9000-200/AB. It has no cable to the base, just a 40 pin CPU cable. Inside is a couple of RAM chips, and some Fluke hybrid interface ICs. Any guesses? John :-#)#

3 7

Any Taito Bench Tester documentation available?
by James Marous 04 Feb '14

04 Feb '14

6 15

Re: Cracking the 9010A ROM signature generator
by Kev 02 Feb '13

02 Feb '13

2 3

Fluke 9000a-8051 Manual
by Ed Osborne 10 Sep '12

10 Sep '12

7 14

Fluke 90 Series Manuals
by Matt Rossiter 29 Oct '10

29 Oct '10

Does anyone happen to know if these are available online somewhere? I have them and I'm just wondering if I should scan them in. The two I have are: 1) 90 Series uP Board Tester - User's Manual 2) Quicktools for the IBM PC - User's Manual Matt _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

4 6

Re: [Techtoolslist] Fluke 900 dynamic trouble shooter
by John Robertson 20 Dec '08

20 Dec '08

Hi Steve, Let me guess, you are using Outlook Express as a mail reader... I will insert the two images in just below this text, the images are large - 4mb - so you can see the details. John :-#)# mail(a)nessandsteve.plus.com wrote: > Hello John, > Thanks for the response. No pictures attached or linked though. I have > been collating information to get my unit working so a picture of your > self test result page would be handy. > > Do you have the interface pod for the unit? > > I will pass on the fluke pod as I can get one from Art for $100 including > the postage. > > Thanks > Steve > > > >> Hi Steve, >> >> My unit does not pass self test as you can see from the photo. If I tell >> it to "ignore" it then does the self test again, going past the Memory >> test, and into the Hardware Test. Gets up to Hardware 56 and then the >> fail screen reappears. >> >> I have two manuals for the machine and the operators book says to >> contact FLUKE to identify what the self test problem is...that is a lot >> of use! >> >> PIctures included. I have no spare parts/accessories (that I know of!) >> for this 900 series unit. >> >> I do have probes for the 9010 - they are $150 each. >> >> Asking $100 plus shipping... >> >> John :-#)# >> >> Backflipper wrote: >> >>> Hello John, >>> I hope you had a good holiday. What can we do about this fluke 900 you >>> have? Also do you have any data aquisition probes for the 9010a? >>> Cheers >>> Steve >>> >>> ----- Original Message ----- >>> *From:* John Robertson <mailto:jrr@flippers.com> >>> *To:* mail(a)nessandsteve.plus.com <mailto:mail@nessandsteve.plus.com> >>> *Sent:* Saturday, November 29, 2008 9:41 PM >>> *Subject:* Re: [Techtoolslist] Fluke 900 dynamic trouble shooter >>> >>> Hi Steve, >>> >>> Got the email, but I am going on vacation for a week and won't be >>> able to dig it out before I go. >>> >>> Remind me in a week or so... >>> >>> John :-#)# >>> >>> mail(a)nessandsteve.plus.com wrote: >>> >>>> That sounds good to me. >>>> I have sent you an email. >>>> Steve >>>> >>>> >>>> >>>>> Backflipper wrote: >>>>> >>>>> >>>>>> Not to be confused with the dedicated CPU testers similar to the >>>>>> 9010a. >>>>>> >>>>>> I have one and it is displaying failures on boot up, so I have >>>>>> been >>>>>> putting together my notes on what I have found as there is no >>>>>> service >>>>>> manual available. Is anybody else interested in this information, >>>>>> does >>>>>> anybody else have one that can send me details on the fault >>>>>> report they >>>>>> have? >>>>>> >>>>>> I know a few people out there have had one infact someone posted >>>>>> on here >>>>>> a few months back with one but I couldn't get in touch, Bill if >>>>>> you are >>>>>> still out there can you get in touch. >>>>>> >>>>>> Cheers >>>>>> Steve >>>>>> >>>>>> >>>>>> >>>>> I have a 900 that is simply collecting dust - no manuals though. >>>>> If you >>>>> can use it get in touch with me. It seems to have a problem with >>>>> memory >>>>> as I recall, but I haven't turned it on in many years... >>>>> >>>>> John :-#)# >>>>> >>>>> -- >>>>> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 >>>>> Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) >>>>> www.flippers.com >>>>> "Old pinballers never die, they just flip out" >>>>> >>>>> >>>>> >>>>> >>>> >>>> >>>> >>>> >>> -- >>> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 >>> Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) >>> www.flippers.com >>> "Old pinballers never die, they just flip out" >>> >>> >>> >> -- >> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 >> Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) >> www.flippers.com >> "Old pinballers never die, they just flip out" >> >> >> > > > > > -- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out"

1 0