- TechToolsList - listserv.classicarcade.com

Re: [Techtoolslist] 9100FT RTC
by Kevit Desai 17 Mar '22

17 Mar '22

Thanks Tony, the system was in storage for five years, prior to storage it was fully functional. Recently I started the Fluke 9100FT and received the following message:please replace battrey in real time clock. The system failed to go beyond this message with no further function of keys or drives, and nor the slightest inclination to boot from the floppy drive, when I pressed:soft key,F2 &F4. When I removed the SCSI card and started the system, it asked me for the system disk, once all programs were loaded ,once again it would go into an unresponsive state. I tried the service disks not knowing the credibility of the download, trying to access the time function, once again some functions were working some not. Many thanks for your help. -- Regards, Kevit Desai Tel: Mobile: +254 722 517067 _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

6 13

9100FT RTC
by Kevit Desai 16 Mar '22

16 Mar '22

Yes the Dallas chip is on the SCSI card. I tried an external battery hack as well as a replacement / equivalent -Dallas 12887, the message : real time clock not initialized is the same in both cases, and I am unable to manually reset or enter information. I am unable to access the hard drive, and therefore unable to boot. On the first quarter of 2018 Ian Eure, encountered an RTC issue TECHTOOL list :DS1287 repair Tony i recall you had also mentioned and shared a post on an RTC issue…I can’t seem to find it any more. None of these posts may have captured my issue in entirety. With regards to the NVRAM issue: I wanted to enquire whether the NVRAM U36 and U26 EPROM are up to date? I have version 1 in both cases and so I shared Information on the same in my previous post. I would also inquire if the is a relation to the problem I am facing. As always I appreciate any support. -- Regards, Kevit Desai Tel: Mobile: +254 722 517067 _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 2

9100 FT RTC
by Kevit Desai 16 Mar '22

16 Mar '22

The RTC battery failed on my 9100FT, upon replacement , i get the following error: real time clock not initialized. I am unable to access keys or the disk and floppy drive. I am aware that such problems have been posted in the past. I would very much appreciate to know how to recover the boot process. And the steps to taken.. many thanks, and I look forward to hearing from you and being part of the community. -- Regards, Kevit Desai Tel: Mobile: +254 722 517067 _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 3

FS: 9100A/FT parts
by Tony Jones 04 Feb '22

04 Feb '22

Clearing out the very last of my 9100 parts. 3x - 9100a-017 vector io modules with cal adapter - $95 each 2x - 9100a-003 parallel io modules with cal adapter - $60 each 4x - 9100a clock module - $30 each I have multiples, quantity listed above. Price is for each not for multiple . Pass self test. No further testing performed nor guaranteed. Shipping extra. I/O modules weigh 4 pounds. Clock modules 16oz (so usps first class). Shipping from USA/OR/97212. If interested please use usps.com, fedex.com , ups.com plus above supplied info to to get a rough shipping estimate before contacting me. PayPal f&f/gift else cover fees. I charge only what carrier charges me for shipping, no charge for packing materials. Thanks _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

FS: Fluke 9000a PODS , original Fluke 9000A pod manuals and AP Product IC Test Clips
by Stuart Banks 03 Feb '22

03 Feb '22

Hi, After taking inventory of surplus equipment in my workshop, I have the following available for sale at this time: Fluke 9010A/9020A Micro-System Troubleshooter PODs 1. Fluke 9000A-68000 POD 2. * excellent condition, ROM v5 3. * Passes Self-Test (tested both 9010A & 9020A) 4. * Ribbon cable & pins are Flawless 5. * Comes with original Fluke POD instruction manual USD$1850 + Shipping 2. Fluke 9000A-8085 POD 1. * excellent, like new condition 2. * Passes Self-Test (tested both 9010A & 9020A) 3. * Ribbon cable & pins are Flawless 4. * Comes with original Fluke POD instruction manual USD$425 + Shipping 3. Fluke Original POD instruction manuals (shipping extra) * 9000A-Z80 USD$25 * 9000A-8080 USD$25 * 9000A-80186 USD$35 4. AP Products IC Chip Test Clips (shipping extra) For 68000 p/n 923743-64-I TC-64 1 NOS (GOLD) USD$65 , 1 Like New (GOLD) USD$45 p/n 923739-64-I LTC-64 1 NOS (GOLD) USD$65 , 2 Like New (GOLD) USD$45, 1 used (tin) USD$25 **** I have a huge assortment of new and used AP Product IC Chip Test Clips, inquire for availability and pricing Contact me for further details, photos available upon request. Thanks, Stuart Banks Hardware Engineer Ottawa, ON _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

FT: American Reliance AR-90LMC logic comparator/monitor
by Chris Rinewalt 31 Jan '22

31 Jan '22

Hello all, I'm looking to trade a working American Reliance AR-90LMC TTL & CMOS logic comparator / monitor. This can handle devices up to 28 pins. It is nearly complete (cable, 16 & 28 pin clips, ground cable, device pin overlays, quick start sheets), only missing the manual- but I've uploaded a copy to the TTL FTP site. I've found this device is fairly sensitive, even at the longest detectable glitch levels, which can be a bit annoying. Still, I've found it useful, finding bad RAM on CCPU boards and the 28 channel logic monitor is quite helpful as well. Right now I am only looking to trade it for a Bugtrap 2074A, or if you've got a complete and working Fluke 900 Dynamic Troubleshooter you want to get rid of, I can throw in $$$. Please contact me off list. _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 2

Looking for Kurz Kasch 410A Pole Position card
by Matthew Rossiter 19 Dec '21

19 Dec '21

Just curious if anyone has an extra one in their stash somewhere? I'm in the process of building an actual test harness, but these cards save so much space and time in my little garage bench. Matt _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

4 5

SALE - Fluke 6502 POD
by Jose Luiz Martins 14 Dec '21

14 Dec '21

Hi I have this 6502 Fluke pod laying around for 20 years and no use. I willing to sell it for 1,600 or best offer. Last one sold for something around 1,900 on ebay. Free shipping from Brazil to anywhere in continental USA. Ask me for Z80QT, 8085 and 8080 pods. Thanks _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 3

Please unsubscribe me
by Art 01 Nov '21

01 Nov '21

Thanks Art

1 0

WTD: Fluke 9100FT display lens
by Tony Jones 14 Oct '21

14 Oct '21

Hi. This list has been very quiet ;-) Does anyone have a replacement display lens for the 9100FT in good condition? 9100FT not 9100A The part circled in red here: https://drive.google.com/file/d/1NrXzzE4FEisMcmAK74kmsvGR73dFYEY1 I'm just looking for what Fluke calls the "lens" (part# 899609) which is the black/grey rectangle which says "Fluke 9100FT Digital Test system" I'll buy the complete display assembly including the beige plastic surround if anyone has one in good (non yellowed) condition. I'll also buy the complete assembly including the keyboard. Or can trade. I don't need the VFD. Thanks Tony _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0