- TechToolsList - listserv.classicarcade.com

Re: [Techtoolslist] leland off road pal dump needed u85
by Fabrizio Vasile 08 Sep '16

08 Sep '16

Il 16/03/2015 21:33, Clay Cowgill ha scritto: >> I was aware of this possibility of dumping PLD like a normal EPROM but >> there could be issue with some programmers. > Shouldn't be. It's a five volt part and since you're not writing data to > the part the lack of OE shouldn't be an issue. (I suppose if you were > particularly concerned you could just buffer the output pins with a '244 > connected to the 2716's CE's and OE.) /*I mean the programmer you are going to use for dumping a PLD as EPROM must *//**//*actually drive the pins both high and low for this to work.Some programmers only drive LOW the pins and use pull-up resistors to force them HIGH. Anyway, like Charles MacDonald explain here: http://dreamjam.co.uk/emuviews/old2009.php you can also read a PAL as a 27C020 EPROM using this simple adapter: http://dreamjam.co.uk/emuviews/temp/adapter2.png *//*/*You will get a 256KB dump that can be analized with his analysing software in order to recompile equations in a GAL16V8 replacement*/ */ > > -Clay > > _______________________________________________ > Techtoolslist mailing list > Techtoolslist(a)flippers.com > https://pairlist7.pair.net/mailman/listinfo/techtoolslist > FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment > Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ > --- Questa e-mail è stata controllata per individuare virus con Avast antivirus. http://www.avast.com _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

6 10

New Useful Toy: Wireless voltmeter Mooshimeter - relays to your cell phone
by John Robertson 05 Sep '16

05 Sep '16

This looks very handy: https://moosh.im/product/mooshimeter/ The video is quite compelling so I bought one... eBay listing for main distributor: http://www.ebay.com/itm/381738473807 John :-#)# -- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

9010 fan question
by Tony Jones 02 Sep '16

02 Sep '16

My 9010 started making a weird pulsing noise which I tracked down to the fan. Like it was trying to start but couldn't. I've never given the fan any thought before, does it run all the time? It's just two wires off the motherboard (which weren't pulsing per my scope) but these go to some kind of fan sending unit which feeds 4 wires to the physical fan. Is this some kind of temperature control? The fan blades didn't spin easily, quite a bit of resistance so I was assuming the fan itself was the problem rather than the sending unit. I have the model# specs for the fan so I'll look for a replacement but that might be challenging, replacing just the fan part and connecting to the existing grey sending unit may be another option. I couldn't find any previous mention of this in the archives, curious if anyone has been here before? Thanks! Tony _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

6 11

EETools AllMax progammer
by Fabrizio Vasile 31 Aug '16

31 Aug '16

Hi all, I recently bought for cheap an EETools AllMax programmer, sadly it came without the ISA interface card so it's pretty useless.Does somebody have this card for sale? I noticed that PCB of this AllMax has unpopulated room for a parallel Centronics 36 pin connector, a PSU connector and some ICs so I guess it could be upgraded to AllMax+ model which has these features as default.Are schematics (and manual too) of the AllMax+ model available somewhere?I asked EETools but I got no reply. Thanks in advance. --- Questa e-mail è stata controllata per individuare virus con Avast antivirus. https://www.avast.com/antivirus _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

ABI Boardmaster 4000 chip adaptors
by Andrew Finn via Techtoolslist 09 Aug '16

09 Aug '16

Hi Does anyone have any info / circuits on the 75188 adaptor ( also known as the mc1488 rs232 transceiver) so these can be tested in the ABI boardmaster 4000? There is also a 4116 ram adaptor too so the boardmaster tells me!! Google on this occasion is not my friend as it comes up with nothing out of the whole of the Internet!!! Many thanks Andrew Sent from my iPhone Please excuse any spelling or grammar mistakes as this was sent from my iPhone _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

13 28

Re: [Techtoolslist] Fluke 9100A troubleshooting
by Tony Jones 05 Aug '16

05 Aug '16

On Aug 4, 2016 7:58 PM, "Ian Eure" <ieure(a)icloud.com> wrote: > I just wish there was something I could do to test & make sure that's the only problem and that the VFD itself is intact. If you cannot figure it out you can bring it over and swap parts between my FTs. The PSU and VFD are common between A and FT. I also have a spare working display processor (not for sale) but we can swap it to test. _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

Fluke 9100A troubleshooting
by Ian Eure 05 Aug '16

05 Aug '16

I’m sure some of you noticed a large amount of Fluke equipment listed on eBay recently. I picked up the new in box 9100A, since I’ve been looking for one and I had an offer accepted at a price I thought wasn’t too out of line, considering that it came with a probe and clock module & was new in original packaging. Unfortunately, the mainframe itself doesn’t seem to boot up. When it’s powered on, I get nothing at all on the VFD, no beeps, and the RUN UUT & DISK ACCESS annunciator LEDs are lit steady. I see in the technical manual that blinking UUT/DISK LEDs are a sign of display problems, but I don’t see anything indicating what solid LEDs would mean. I opened it up and found the SCSI card I was thinking that perhaps the HDD wasn’t working, or didn’t have the software installed on it, but I’d expect to see something on the display even if that was the case. Does anyone have suggestions to diagnose further before I ask for a partial refund? Thanks, Ian. _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 5

Fluke manuals for sale
by Tony Jones 05 Aug '16

05 Aug '16

I have a bunch of Fluke pod manuals for sale. $20 9100A/9105A Supplemerntal Pod Information (documents 9100 changes; versus 9010 info in pod manuals) All in good condition. I can send pics if you wish. $20 9000A-z80 interface pod $15 9000A-8080 interface pod $10 9000A-6800 interface pod $10 9000A-8085 interface pod [phoenix] $10 9000A-8048 interface pod [nintendo sound] $10 9000A-9900 interface pod [ti99/4a] $5 9000A-1802 interface pod $5 9000A-80186 interface pod $5 9000A-8086 interface pod Shipping additional via USPS Media Mail. $2-$5 depending on #manuals _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

Fluke pods for sale
by Tony Jones 04 Aug '16

04 Aug '16

Detailed pics available. Please email me. I don't take Paypal, sorry, I got sick of their policies and disconnected my bank account. Payment by Money Order. All pods pass self-test. All cables and pins are in good condition. I've not done any further (i.e uut) testing. 1. z80, grounded/shielded Fluke cable (so can be upgraded to /AA). Excellent cosmetic condition. $400 2. 8080. flat ribbon cable, good cosmetic condition $175 3. 8088, grounded/shielded Fluke cable, some slight wear to plastic $160 Located in Portland, OR. Local pickup preferred (so I can demonstrate working) but I will ship (fully insured, ground) at buyers expense. Thanks Tony _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

Quarter Arcade
by William Stillwell 30 Jul '16

30 Jul '16

Looks like it went bye bye :( Now it's a re-direct to some collector site? Anybody have a mirror of it? I can slap up on my server. _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

9 27