- TechToolsList - listserv.classicarcade.com

Help troubleshooting a 9010A
by barry2＠shilmover.com 27 May '09

27 May '09

I been having trouble posting to the group... trying again. I have 2 non-working 9010A units. On both they beep once, LEDs flash, then nothing. Hooked up a working 9010A that I borrowed (thanks David). Bus tests fine. RAM returns the following: R/W ERR @ C000 BTS 08 - LOOP? Manual states: If a RAM failure occurs, carefully examine the diagnostic message. The RAM Test is usually sufficient for deducing the failed component directly. It then does not explain how to read the message. :-) I am new to this, so be kind if its a stupid question. I deduced that there is a Read/Write error at C000. How do I "deduce" the failed component? Barry _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 1

WTT/WTB Tested and Working Fluke 9010a Tape Deck
by Matt Rossiter 17 May '09

17 May '09

I'm getting tired of trying to fix this Fluke 9010a Tape Deck that I have. Does anyone have a working spare Tape Deck that they are willing to sell or trade? I have some extra probes and other things. I'd at least like to know that it's not the troubleshooter itself. Thanks! Matt _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 1

Looking for Pods/accessories
by Barry Shilmover 14 May '09

14 May '09

All, Looking for the following Pods: 6502 8088 z80 Please let me know if you have any for sale/trade. B _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 2

Help with a 68000 Pod
by Barry Shilmover 13 May '09

13 May '09

I have a 68000 pod and when I put it into self test mode, I get the following message on the 9100A. "Pod name not yet known (please reset)" I borrowed another pod (z80) and it tested fine (selftest and with a Ms Pac Man board). Ideas? B _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

FS: EconoROM III 4mbit/45ns EPROM emulator
by Corey Stup 12 May '09

12 May '09

I've got a 4mbit/45ns ER3 for sale. Comes with parallel adapter, 28 and 32 pin target cables. It was sent back to TechTools to be serviced and checked so its working 100%. Target or (optional) externally powered. This is still the current model they sell for $399. http://www.tech-tools.com/er3.htm $175 + shipping, PayPal accepted. _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

FS: Fluke 9100 units and accessories
by Corey Stup 12 May '09

12 May '09

I've got lots of 9100 items to sell. Let me know what you're interested in. 9100A and 9100FT base units video cards -003 I/O modules with DIP adaptors and chip clips pods I'm looking to sell sets if possible so lets make a deal. Its hard to price some of this stuff so we'll just come up with what seems fair. _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

Re: [Techtoolslist] Tweaking a 9010 z80 pod to be a z80b pod?
by mike＠the-coates.com 11 May '09

11 May '09

I can't think of any reason why it wouldn't work if you swopped the CPU in the pod for a B version, although I've obviously been lucky, my Z80 pod works fine at 6Mhz without me needing to do that. (I did however, replace the 12Mhz CPU with a 16Mhz one in my 68000 pod) --- Trying to get a pair of spy hunter boards working. One is brain dead and I want to run it through the 9010 paces. But I don't have a z80b pod. Is it possible to mod a z80 pod to be a z80b pod? _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

5 6

WTD: HP 54120 test set umbilical cable (54120-61618)
by mail＠nessandsteve.plus.com 01 May '09

01 May '09

Hello All, Can anyone help me out? I am after the cable (54120-61618) that connects the test set to the main frame for this beast of a scope. There is one on ebay.com at the moment: http://cgi.ebay.co.uk/HP-54120-61618-2m-umbilical-cable-for-54121T-system_W… for £100 delivered. I would like to save some money on it but if not then I would prefer the money went to someone on here. Cheers Steve _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 1

Tweaking a 9010 z80 pod to be a z80b pod?
by David Shoemaker 01 May '09

01 May '09

Trying to get a pair of spy hunter boards working. One is brain dead and I want to run it through the 9010 paces. But I don't have a z80b pod. Is it possible to mod a z80 pod to be a z80b pod? David _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

Dataman 48Pro+ Universal ISP Programmer
by Matt Rossiter 30 Apr '09

30 Apr '09

I saved enough money in my Videogame piggy bank to buy one of these a few months ago. Mainly because I was tired of using the big and bulky Data I/O 29b and always coming short of an occasional adapter that I needed. I just wanted something that fits in my desk that I can check IC's with and burn any eprom I needed. I have to say, their support team is a big plus. I asked them to add the 82S114/82S115 proms to their list - which are pretty uncommon. I just needed to send them a couple samples and some datasheets and they did it. I was able to test and burn some Atari Drag Race proms this morning. I also asked them to add 2101A/9101A rams so that I could go through and test my stash. It will also test 2114's but sometimes there are some brands that fail such as the Toshiba TMM314's - so I asked them to add those and they did. You certainly get what you pay for. :) The only bummer is you do need an expensive ($200) adapter for 2708's or TMS2716 eproms - so I keep my Data I/O at bay for those. Matt _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0