I have a 68000 pod and when I put it into self test mode, I get the following message on the 9100A. "Pod name not yet known (please reset)" I borrowed another pod (z80) and it tested fine (selftest and with a Ms Pac Man board). Ideas? B _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/