- TechToolsList - listserv.classicarcade.com

Fluke 9010a Software Revs
by Kevin Moore 08 Mar '10

08 Mar '10

What's the differences between V 2B and V 3A on the fluke 9010a? I just got a Fluke with 3A and if it's better I would like to upgrade all my Flukes. Or is there a need to hold onto 2B? Thanks, Kevin _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

Interest in a 9100A setup?
by James Bright 07 Mar '10

07 Mar '10

Is there interest in a full 9100A setup? I have a set up here that could probably go to a better home. Keyboard, main unit, I/O module, etc. I have a monitor, but that might be a bit expensive to ship. LMK. Thanks. JB _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 2

9100FT flukes...
by Andrew Welburn 03 Mar '10

03 Mar '10

hi all.. Has anyone looked into what the differences are between the 9100FT and the regular 9100A ? I'm stuck with a 9100A and i've seen a video of the speed of an FT and the green eyed monster got me. Does anyone know what the differences are between them? can't be much surely? I'd love it if it just meant swapping xtals and cpu's :-) any ideas? Andrew Welburn www.andys-arcade.com _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 1

6803 CPU - Fluke 9010/9100 update
by John Robertson 02 Mar '10

02 Mar '10

I just got off the phone chatting with Shy of Navatek and, as usual, he was most helpful. I asked about the Fluke 6803 adapter for the 6802 pod and he turns out to be the designer! Says he has the information around somewhere and is happy to send it along so once it arrives I will let folks know and post any schematics to Flippers FTP site (with Shy's permission granted). Shy's contact info (9100 and 9010 parts, repairs, etc. he bought up Flukes stock when they discontinued the series): shy(a)navatek.com Shy Meirovitch Navatek 20331 Lake Forest Dr Suite C-16 Lake Forest CA 92630 (949) 588-2121 John :-#)# -- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out" _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 4

WTD: Missing persons report on Corey Stup :)
by Tim Matthews 19 Feb '10

19 Feb '10

Hi all, I've been trying to get in touch with Corey Stup for a couple of weeks now to no avail. He's been an A1 guy wrt to timely email responses so I just wondered if anybody knew of real-life circumstances that might be stopping him getting access to his email? If you know Corey can you please ask him to get in touch with me ASAP, or if anybody has spoken/mailed him since the 19th Jan I'd appreciate you letting me know. To be 100% clear, there is nothing dodgy about this or Corey; Corey doesn't owe me - I just need to get in touch with him. Many thanks, tim -- trmatthe(a)gmail.com _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

FS : Some Fluke pods
by Andrew Welburn 10 Feb '10

10 Feb '10

hi all.. I can't remember the rules on posting stuff for FS here, if i've been bad, please delete me... no offence intended... I've just gone through my box and decided to move on my fautly Fluke pods... Just to explain, i use my fluke 9100 a few times a week, it gets a lot of use, but i have never attempted to fix a pod, i have no intention of doing so. I carry spares for all the common pods i use and prefer to just move my faulty pods on as-is when they fail rather than spend time trying to fix them... call me weird, but hey, i'm busy :) So.. i have : - 8085 pod - worked fine for years then one day came up with the 'pod name not known - please reset' - 6809 pod - worked fine for years then one day came up with the 'pod name not known - please reset' - 6809 pod - marked ass duff, i can't remember where i got it from, it may have been opened in the past - 68000 pod - has been opened, uut lead and fluke lead not attatched, has been used as spares in the past i think? Shipping will be £12 to the UK, £50 to Europe £65 to USA (all shipped together) I'd like to shift the whole lot in one go, send me an email if you want to make an offer for the lot. If you're only after one or two pods i guess i can split, but priority will go to people asking for the whole lot... enjoy Andrew Welburn www.andys-arcade.com _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 1

9010a RS232 problem?
by Kevin Moore 09 Jan '10

09 Jan '10

Ok the holidays are over, and I'm back to trying to get my Fluke hooked up to the computer so I can do scripts. Problem I'm having is that when I enter the following Aux/if , Read , Yes the fluke resets after 1-2 secs. It will also do this with the serial port unplugged. I'm wondering if the is a normal action, like the Fluke is looking for a signal from the com port to wait, or if there is a problem with my fluke.. Thanks, Kevin _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

6 12

Cat box, and fluke usage..
by Kevin Moore 31 Dec '09

31 Dec '09

Hi all, in my quest to learn more about using these tools, I've actually come up with a problem, and could use a little explanation. I'm working on a liberator board, and was using the atari cat box. The first two tests in the liberator manual have you check address lines. Well those checked out good. Next was the Data lines. This is where things fell apart, and I'm not sure what I'm seeing. Punch in address 0000, and write AA check the D0-D7 lines going to the ls245 well half the incoming lines are the wrong state, and the output of the ls245 is non existent. Ie pins 2-9 have no output. So I hook up my fluke 9010a thinking there may be something wrong with the catbox, since this is the first time I've used it. Did the same basic setup wddis grounded, and Φ0 Φ2 shorted together. Do a write to 0000 with AA and use my logic probe to check. Same results. Am I to assume Bad memory at location 0000.?? _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

4 11

6809 pod on eBay - US customers only...
by John Robertson 22 Dec '09

22 Dec '09

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=360218152817 They only ship to US addresses. Some people do not make more money by exporting... John ;-#)# _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

FS: Paratronics/Nicholet logic analyzer probe/connectors
by Corey Stup 28 Nov '09

28 Nov '09

I have some left over probes/pods from a Nicolet/Paratronics logic analyzer. Qty (2) Model 51A 16 bit analyzer probe Qty (1) Model 80 8 bit timing probe Qty (6) Connector units for the above with flying leads attached I can provide pictures if interested. Sell the whole lot for $30 + Priority Mail shipping. PayPal negotiable. _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0