December 2014 - TechToolsList - listserv.classicarcade.com

Alpha Electronics Dynamic Integrated Digital IC Tester on eBay
by John Robertson 17 Feb '20

17 Feb '20

I chatted with the seller and he confirms that it does NOT power up. So chances are the battery backed up system ROM has failed. Item 390623172259 He reduced the price on his own from the original asking $59.95 to $19.95. Pity. I was hoping to find a good one to extract the program from to save mine... If someone here buys it and CAN extract the ROM data I'd sure like a copy! John :-#(# _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

11 29

Re: [Techtoolslist] Fluke on Mario Bros.
by David Shoemaker 20 Apr '18

20 Apr '18

Looking at the manual for the Z80QT pod and the schematic I think I am getting an expected result. I hooked up the pod and hit BUS to run the bus test. I immediately get back CTL ERR showing 00000010 this is the HALT line. Looking at the schematic it appears HALT and INT are both tied together and pulled high. So the fluke can't exercise that line. Any way to ignore that error and verify the rest of the bus test? Oh and according the manual maximum clock frequency is 8.0 mhz. Does that mean this pod support Z80A/B/C ? From: David Shoemaker [mailto:davids@oz.net] Sent: Wednesday, November 16, 2011 10:38 PM To: 'Technical Tools Mail List' Subject: Fluke on Mario Bros. Anyone know if you can use either the base z80 pod or the z80qt pod on Mario bros? I know it uses the Z80A but I don't know what the pod is rated at. Thanks, David _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

4 7

Fluke 9000A mystery adapter (for me at least ;-)
by John Robertson 20 Feb '18

20 Feb '18

I have a pod module here called "Z8 I/F ADAPTER" Fluke #9000-200/AB. It has no cable to the base, just a 40 pin CPU cable. Inside is a couple of RAM chips, and some Fluke hybrid interface ICs. Any guesses? John :-#)#

3 7

Success... Fluke FIDE on a 64 Bit OS...
by William Stillwell 02 Feb '17

02 Feb '17

I have written a DosBox Wrapper that will allow FIDE to run the 16 Bit 9LC Wrapper in 64 Bit Windows Machine ( Tested on Windows 7 Enterprise 64 Bit ) You can download the compressed archive here: http://www.coinopflorida.com/fluke/DosBox_9LC.rar Just install Dos Box 0.74 to its default directory, and extract the above files into the Internal Directory of FIDE I am still tweaking it, but for now its will allow you to compile a script, and then send it using the toolbar button, the "Compile & Send" doesn't work, FIDE trys to send the file before its compiled ( I have a good idea what is causing this and can be fixed, but will need to test more ) _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

7 11

Fluke 9010A - RS-232 & USB interface!!
by John Robertson 29 Sep '16

29 Sep '16

FINALLY - something many of us have been thinking about for many years has come to pass. A Fluke owner in Italy has designed a nice little PCB for the 9010 that will give USB and RS-232 I/O communication capabilities! http://www.ukvac.com/forum/fs-fluke-9010a-option-1_topic339624.html His name is Piero Andreini and I suspect he is going to get a few emails on this. His email is pieroandreini(at)vodafone(dot)it Nice guy! He is looking for the usual pods by the way - 6800, 6502, 68000, and 6809. Someone needs to make these... This concept could easily be ported to the 9100 I suspect...is Ethernet next? John :-#)# -- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

6 7

Ivan 'Ironman' Stewart's Super Off Road trac pac fluke 9010a script
by John Doe 02 Feb '16

02 Feb '16

this is a code snip form the MAME driver: 59/************************************* 60 * 61 * Master CPU memory handlers 62 * 63 *************************************/ 64 65static ADDRESS_MAP_START( master_map_program, AS_PROGRAM, 8, leland_state ) 66 AM_RANGE(0x0000, 0x1fff) AM_ROM 67 AM_RANGE(0x2000, 0x9fff) AM_ROMBANK("bank1") 68 AM_RANGE(0xa000, 0xdfff) AM_ROMBANK("bank2") AM_WRITE(leland_battery_ram_w) AM_SHARE("battery") 69 AM_RANGE(0xe000, 0xefff) AM_RAM 70 AM_RANGE(0xf000, 0xf3ff) AM_READWRITE(leland_gated_paletteram_r, leland_gated_paletteram_w) AM_SHARE("paletteram") 71 AM_RANGE(0xf800, 0xf801) AM_WRITE(leland_master_video_addr_w) 72 ADDRESS_MAP_END 73 74 75static ADDRESS_MAP_START( master_map_io, AS_IO, 8, leland_state ) 76 ADDRESS_MAP_GLOBAL_MASK(0xff) 77 AM_RANGE(0xf0, 0xf0) AM_WRITE(leland_master_alt_bankswitch_w) 78 AM_RANGE(0xf2, 0xf2) AM_DEVREADWRITE_LEGACY("custom", leland_80186_response_r, leland_80186_command_lo_w) 79 AM_RANGE(0xf4, 0xf4) AM _DEVWRITE_LEGACY("custom", leland_80186_command_hi_w) 80 AM_RANGE(0xfd, 0xff) AM_READWRITE(leland_master_analog_key_r, leland_master_analog_key_w) 81 ADDRESS_MAP_END 82 83 84 85/************************************* 86 * 87 * Slave CPU memory handlers 88 * 89 *************************************/ 90 91static ADDRESS_MAP_START( slave_small_map_program, AS_PROGRAM, 8, leland_state ) 92 AM_RANGE(0x0000, 0x1fff) AM_ROM 93 AM_RANGE(0x2000, 0xdfff) AM_ROMBANK("bank3") 94 AM_RANGE(0xe000, 0xefff) AM_RAM 95 AM_RANGE(0xf800, 0xf801) AM_WRITE(leland_slave_video_addr_w) 96 AM_RANGE(0xf802, 0xf802) AM_READ(leland_raster_r) 97 AM_RANGE(0xf803, 0xf803) AM_WRITE(leland_slave_small_banksw_w) 98 ADDRESS_MAP_END 99 100 101static ADDRESS_MAP_START( slave_large_map_program, AS_PROGRAM, 8, leland_state ) 102 AM_RANGE(0x0000, 0x1fff) AM_ROM 103 AM_RANGE(0x4000, 0xbfff) AM_ROMBANK("bank3") 104 AM_RANGE(0xc000, 0xc000) AM_WRITE(leland_slave_large_banksw_w) 105 AM_RANGE(0xe000, 0 xefff) AM_RAM 106 AM_RANGE(0xf800, 0xf801) AM_WRITE(leland_slave_video_addr_w) 107 AM_RANGE(0xf802, 0xf802) AM_READ(leland_raster_r) 108 ADDRESS_MAP_END 109 110 111static ADDRESS_MAP_START( slave_map_io, AS_IO, 8, leland_state ) 112 ADDRESS_MAP_GLOBAL_MASK(0xff) 113 AM_RANGE(0x00, 0x1f) AM_READWRITE(leland_svram_port_r, leland_svram_port_w) 114 AM_RANGE(0x40, 0x5f) AM_READWRITE(leland_svram_port_r, leland_svram_port_w) 115 ADDRESS_MAP_END 116look at it and you'll find the memory map... ---------------------------------------------------------------------- Message: 1 Date: Mon, 4 Nov 2013 14:05:03 -0500 From: "sales htbs" <sales(a)htbsusa.com> Subject: [Techtoolslist] Ivan 'Ironman' Stewart's Super Off Road trac pac fluke 9010a script To: "'Technical Tools Mail List'" <techtoolslist(a)flippers.com> Message-ID: <003e01ced990$c4893f10$4d9bbd30$@com> Content-Type: text/plain; charset="us-ascii" Subject: Ivan 'Ironman' Stewart's Super Off Road trac pac fluke 9010a script Anyone have a script for Ivan 'Ironman' Stewart's Super Off Road trac pac fluke 9010a script I tried to learn a good board and it did not work I cannot find a memory map for this on quarter arcade I ran the Leland test for bottom board I have 3 board sets that I am working on 1 has the split screen track on top Other 2 were dead Any help would be great Thanks tony @ hi-tech ------------------------------ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippe rs.com http://seven.pairlist.net/mailman/listinfo/techtoolslist End of Techtoolslist Digest, Vol 107, Issue 2 ********************************************* _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 4

9100FT
by Andrew Welburn 05 Jun '15

05 Jun '15

long shot.. But has anyone seen, or knows of a service disk suitable for the 9100FT ? I'm updating my 9100 page soon as i've been working on 5 of these systems, but while i can set the 9100FT to acknowledge 16mb ram in post, the system always reports just 4mb.. I can actually get it to test 32mb (when installed 8x4mb) but the post always fails, and the dip switch combination is not even valid as per what is screened on the pcb. I dont think they ever anticipated any crazy person putting in 32mb ram and just abandoned compatability :) the v1.4 service disk is the latest version i have, but it only allows you to set 1,2 or 4mb system ram... any ideas? -- Andrew Welburn http://www.andys-arcade.com _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

4 11

9020A via IEEE-488?
by Nigel Williams 17 Mar '15

17 Mar '15

I recently acquired a 9020A with a IEEE-488 interface and wondering if anyone has documents for using this configuration. I found the 9010A vs 9020A differences document from Fluke, but I'm not sure what software was used to control the 9020A via the 488 bus. I would be interested in the service manual and operating manual for the 9020A if anyone has spares too please. thanks. _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 1

Changing mains voltage for power supply PSU on the Fluke 9020A
by Nigel Williams 17 Mar '15

17 Mar '15

In the interest of saving someone else a little time, if you need to change the line-voltage on the Fluke 9020A micro-tester then refer to the following pictures: http://imgur.com/a/Im6bF#0 In the final picture are two slide switches in the lower middle, on the PCB there is an indication of the voltage options and you can adjust the switches, for 240V I swapped them from how they appear in the picture (which was how they were set for 110V). Safety-first, don't try this at home without supervision etc unless you know what you're doing. _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 1

Symbol table for Williams System 11ish pinball - DasmX?
by John Robertson 18 Dec '14

18 Dec '14

I'm working on a mod for a Data East game, and would like to know if anyone has a Williams (or DE) symbol table they are willing to share so I can disassemble the code more easily. What I have so far is: cpu 6802 org 0x4000 vector 0x2400 pia_solenoid_PRA vector 0x2401 pia_solenoid_CRA vector 0x2402 pia_solenoid_PRB vector 0x2403 pia_solenoid_CRA vector 0xFFF8 irq_vector int_entry vector 0xFFFA swi_vector swi_entry vector 0xFFFC nmi_vector nmi_entry vector 0xFFFE res_vector reset However that is just the start...obviously more work is needed. Thanks! John :-#)# -- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0