March 2006 - TechToolsList - listserv.classicarcade.com

Fluke 9000A mystery adapter (for me at least ;-)
by John Robertson 20 Feb '18

20 Feb '18

I have a pod module here called "Z8 I/F ADAPTER" Fluke #9000-200/AB. It has no cable to the base, just a 40 pin CPU cable. Inside is a couple of RAM chips, and some Fluke hybrid interface ICs. Any guesses? John :-#)#

3 7

Any Taito Bench Tester documentation available?
by James Marous 04 Feb '14

04 Feb '14

6 15

Re: Cracking the 9010A ROM signature generator
by Kev 02 Feb '13

02 Feb '13

2 3

Fluke 9000a-8051 Manual
by Ed Osborne 10 Sep '12

10 Sep '12

7 14

Fluke pod cables (related to 6502 pod)
by David Shoemaker 27 May '08

27 May '08

4 4

Unipak 2B adaptor query
by Phil Morris 09 Mar '07

09 Mar '07

I have a Data I/O 29B EPROM programmer with a Unipak 2B and need to get hold of an adaptor for it, specifically adaptor no: 351B068 Does anyone either have one of these or know what it consists of please? Does it perhaps just re-route a few pins, or is there more to it than that? Thanks, Phil _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

5 7

Updated info
by Jimmy Futrelle 28 Mar '06

28 Mar '06

2 1

Another prom programming query
by Martin White 14 Mar '06

14 Mar '06

After the query about the prom the other day, it reminded me... I have a bunch of TBP18S030N proms here. They're meant to be 82S123 equivalent's but my Data I/O doesn't have them listed. If I try programming them as either a 5610 (I think, this is going from memory) or an 82S123 then they won't program, they just fail. Anyone know if there is way to program these on the Data I/O please? Thanks, Martin. _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

2 3

Test/soldering equipment for sale
by Corey Stup 13 Mar '06

13 Mar '06

I've got some extra stuff I don't need anymore. Perhaps someone can use it. Arium 4100 Logic Analyzer. Boots up, screen is bright, flickers a little (brightness pot dirty?). Comes with LP320 32 channel pod with lead set, 1/2 of the miniclips are still attached. $50. Hakko 484 desoldering iron. The collection tube (glass) and pull handle are cracked, but it heats up and pulls vacuum. This was my primary station until I got a larger one. Parts should still be available from Hakko direct. Comes with the box, manual/parts list, and cleaning tool. $35. Z80 probe for HP 1611 series logic analyzers. Untested, but was a working pull. I don't have a 1611 series to test on. $10. 6802 probe for Applied Microsystems logic analyzers. Untested. $10. Fluke Trendar 200 test clip. Put over a 16 or 14 pin IC in circuit, and it shows the LED status of all pins. Comes in case with manual, and some of the test clips. $20. Weller/Ungar 4624 solder/desoldering station. Both a pencil iron and a desoldering gun. Adjustable/regulated temp on both. Desoldering side could use a new tip, but it works okay as it is. Includes the cleaning pins. $50. _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

1 0

Another correction
by Jimmy Futrelle 10 Mar '06

10 Mar '06

1 0