After the query about the prom the other day, it reminded me... I have a bunch of TBP18S030N proms here. They're meant to be 82S123 equivalent's but my Data I/O doesn't have them listed. If I try programming them as either a 5610 (I think, this is going from memory) or an 82S123 then they won't program, they just fail. Anyone know if there is way to program these on the Data I/O please? Thanks, Martin. _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist
I should probably add that my Data I/O is a 29b with Unipak (2B?) - the same as the one featured on Leopardcat's site. Martin. ------------------------ Guddler's Domain http://www.guddler.co.uk
After the query about the prom the other day, it reminded me...
I have a bunch of TBP18S030N proms here. They're meant to be 82S123 equivalent's but my Data I/O doesn't have them listed.
If I try programming them as either a 5610 (I think, this is going from memory) or an 82S123 then they won't program, they just fail.
Anyone know if there is way to program these on the Data I/O please?
Thanks, Martin.
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist
According to my chart that PROM is 04/02 with a note that it can't be programmed written in pen...in brackets it says (74S288). I think I have a PDF copy of that 1 page chart on the FTP site under Data i/o. John :-#)# At 10:24 AM +0000 2/22/06, Martin White wrote:
After the query about the prom the other day, it reminded me...
I have a bunch of TBP18S030N proms here. They're meant to be 82S123 equivalent's but my Data I/O doesn't have them listed.
If I try programming them as either a 5610 (I think, this is going from memory) or an 82S123 then they won't program, they just fail.
Anyone know if there is way to program these on the Data I/O please?
Thanks, Martin.
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist
I have just updated the Kurz_Kasch directory with more pages for the video/pinball/jukebox board level test fixture. I shall pop more files there once my auto-feed scanner is working correctly again. It's twisting the pages and chewing the edges...so I'm restoring the rollers. I have also added a file for the Deatron directory - their catalog from the 1980s. ftp.flippers.com/TTL (Test Equipment) John :-#)# _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist
participants (2)
-
John Robertson -
Martin White