February 2006 - TechToolsList - listserv.classicarcade.com

Fluke 9000A mystery adapter (for me at least ;-)
by John Robertson 20 Feb '18

20 Feb '18

I have a pod module here called "Z8 I/F ADAPTER" Fluke #9000-200/AB. It has no cable to the base, just a 40 pin CPU cable. Inside is a couple of RAM chips, and some Fluke hybrid interface ICs. Any guesses? John :-#)#

3 7

Any Taito Bench Tester documentation available?
by James Marous 04 Feb '14

04 Feb '14

6 15

Re: Cracking the 9010A ROM signature generator
by Kev 02 Feb '13

02 Feb '13

2 3

Fluke 9000a-8051 Manual
by Ed Osborne 10 Sep '12

10 Sep '12

7 14

Fluke pod cables (related to 6502 pod)
by David Shoemaker 27 May '08

27 May '08

4 4

Unipak 2B adaptor query
by Phil Morris 09 Mar '07

09 Mar '07

I have a Data I/O 29B EPROM programmer with a Unipak 2B and need to get hold of an adaptor for it, specifically adaptor no: 351B068 Does anyone either have one of these or know what it consists of please? Does it perhaps just re-route a few pins, or is there more to it than that? Thanks, Phil _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

5 7

Another prom programming query
by Martin White 14 Mar '06

14 Mar '06

After the query about the prom the other day, it reminded me... I have a bunch of TBP18S030N proms here. They're meant to be 82S123 equivalent's but my Data I/O doesn't have them listed. If I try programming them as either a 5610 (I think, this is going from memory) or an 82S123 then they won't program, they just fail. Anyone know if there is way to program these on the Data I/O please? Thanks, Martin. _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

2 3

RE: [Techtoolslist] Re: information
by Chris Toseland 01 Mar '06

01 Mar '06

Hi Mark, Thanks for the response. Just 1 quick question at the moment should all the keys work from the get go or do you have to be in certain modes as I can't get the numeric part of the keyboard or the mode or signature buttons to register. Just wondering if a keyscan chip isn't working. Cheers Chris -----Original Message----- From: techtoolslist-bounces(a)flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of mark.templeton(a)wdr123m.freeserve.co.uk Sent: 22 February 2006 10:22 To: techtoolslist(a)flippers.com Subject: [Techtoolslist] Re: information The 7201 is a signature analyser, with multimeter functionality. I don't have a manual, but it's what I used when I worked for Ruffler and Deith, back in the 1980s. At the time, HP were ridiculously expensive, so Solatron tried to enter the market. The 7201 was unstable on some boards (like Galaxian). I went on a two-day course near Reading, to learn how to use it, and spent most of the time helping the designer to improve its compatability. It didn't catch on, presumably due to its size, and the fact that the HP products actually worked reliably! I'll be happy to scratch my head over any further questions, if no one comes up with a manual. An excellent piece of nostalgia - if you decide to sell it, let me know! Mark _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

2 3

RE: [Techtoolslist] Kool Tools: IC Comparator checks PROMs
by Andy Welburn 25 Feb '06

25 Feb '06

Sorry for the double post, and I'd also like to add that the HP uses DIP switches that you flip for in/out pin configuration not jumpers as John mentioned. I assume the bugtrap is doingthe same thing, lighting up on outputs on a compare error... Like everything else on your bench, and as Kev (moverman) says on his page its not a 100% definitive tool, but is a good time-saver, and to be used like all other tools on your bench, to help you find faults. Just thinking about it, it does have two drawbacks, one is that it doesn't do tri-state devices (so I guess that rules out some types of proms) does the bugtrap? The second one is that it only does 14 or 16 pin IC's, which can be annoying when you want to check 20pin buffers etc.. Anyhow, I'm rambling. Andy Welburn www.andysarcade.net > -----Original Message----- > From: techtoolslist-bounces(a)flippers.com [mailto:techtoolslist- > bounces(a)flippers.com] On Behalf Of Andy Welburn > Sent: 25 February 2006 16:05 > To: 'Technical Tools Mail List' > Subject: RE: [Techtoolslist] Kool Tools: IC Comparator checks PROMs > > You can make one IC board per board if you really wanted to, but every > single 10529A was shipped with a ZIF board AFAIK, virtually everyone that > turns up on ebay in its box has the ZIF board. > > So in actual fact, the HP is more compact than the Bugtrap, and you don't > need to supply 5v via fly leads as the HP takes its power from the IC > under > test.. > > I've been using the HP for years, pretty invaluable, but I've never tried > it > with proms, good idea tho, in theory it should show up comparison > differences the same that a bugtrap does. > > Andy Welburn > www.andysarcade.net _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

1 0

Re: [Techtoolslist] Kool Tools: IC Comparator checks PROMs
by Electronicamuse＠aol.com 25 Feb '06

25 Feb '06

4 5