March 2000 - TechToolsList - listserv.classicarcade.com

Re: 8086 pod for fluke?
by Chris_Hardy＠vie.co.uk 13 Sep '05

13 Sep '05

Hey, that would be my cue :) All of the M72, M82, M84 games from Irem use a NEC V20 which is a 8086 with some extra instructions. It's also pin compatible so the 8086 pod is usable with it. Of course, there aren't exactly many of these around :) Chris (M72 = RType, Dragon Breed, XMultiply, + others, M82 = RType II, Pound for Pound, M84 = Major Title) ______________________________ Reply Separator _________________________________ Subject: 8086 pod for fluke? Author: Noel Johnson <nej(a)airmail.net> at Internet Date: 1/17/00 12:09 AM Hello All, I am about to obtain an 8086 pod for a fluke 9010. Did any arcade games use the 8086 or am I going to have to trade this puppy away?? Thanks! Noel

2 2

Re[2]: Fluke T-shooters
by Chris_Hardy＠vie.co.uk 10 Aug '05

10 Aug '05

Does anyone know if the scripts for the 9010 work on a 9100a?? It may also be of interest to know that someone (presumably Al Kossow) has scanned and pdf'ed a lot of the fluke manuals and uploaded them to www.spies.com/arcade. There's a fluke directory which has some 9010 scripts and the .exe to compile them, and in the TE directory there are manuals for the 9010,9100 and most of the POD's. (I presume Al wrote the scripts) Unfortunately, the user manual for the 9100 isn't there. Sigh... Chris (I would like a copy of the scipt also :) ______________________________ Reply Separator _________________________________ Subject: RE: Fluke T-shooters Author: John Robertson <jrr(a)flippers.com> at Internet Date: 1/11/00 8:40 AM I found the Asteroids script, had downloaded it a while ago and it was lurking in the wrong area. Would anyone like a copy? John :-#)#

6 15

fluke 9010a help required please
by Peter Davies 15 Jun '00

15 Jun '00

I have been writing some script files for my fluke 9010a in order to trouble shoot some 'Universal boardsets that I have (eg:- cosmic monsters etc.) The problem is I only have One Tape. so i decided to download the scripts to my pentium III portable. No Problem downloaded perfectly :-)) trouble is when i try to upload them back to the fluke always at line 7 fluke sends an error message (Scriptfile about 110 lines long) and aborts sadly the message it gives is the abiguous message AUX-Receiving-ERROR discribed as 'Miscellanious Transmission Problems'???? Can anyone sugest anything I might try. I am sending to the pc with BAUD 9600 , PARITY=NONE , BITS=1 and Xon Xoff protocol as I say no problem sending to the pc. When Scriptfile and Signature Analysis is complete will post it for the use of the list members. Thanks in advance Pete Davies (Invadar) To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the message body to: techtoolslist-request(a)flippers.com. Please direct other questions, comments, or problems to jrr(a)flippers.com.

10 21

Fluke 90 Tester, Anyone?
by James Marous 21 Apr '00

21 Apr '00

Check this auction out: http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=211809283 Anyone ever used one of these? Seems descent for the money ($61), just curious if anyone has actually owned one. On another note, I bought a 6809 pod for my 9010 from a place in Canade for $15, minus the cable that goes from the pod to the UUT. I called Fluke yesterday and they actually had the part in stock! Amazing.... Guess if you need parts for your 9000 series, you might give the parts line a call... 800-44-fluke and give them the Fluke part #. Because We Care James Marous James Marous Engineering Manager Midmark Corp. Versailles, OH mailto:jmarous@midmark.com

3 3

Re: Frequency counter, Pace MBT solder and extractor
by FBowen＠checkfree.com 31 Mar '00

31 Mar '00

Thanks for the info. The seller didn't know the range. One of the reasons I didn't buy it. I might get the kit from weedtech.com though. "Kev" <KKlopp(a)EROLS.COM> on 03/23/2000 11:25:32 AM Please respond to TechToolsList(a)flippers.com To: <TechToolsList(a)flippers.com> cc: Subject: Re: Frequency counter, Pace MBT solder and extractor I'm building a freq counter as a learning experience with PIC controllers. http://204.210.50.240/techref/default.asp?from=/techref/microchip/../piclist /&url=weedfreq.htmThere is a discussion that this is only accurate to 20 Mhz range when built with a 16F84 pic but use of a non-flash pic can make it faster. It will probably be udpated in the future. But 20 Mhz will cover me for now (Pac Man has 6 Mhz signals). One warning don't try to use an OPTIX 16x1 display as they are actually a 8x2 so now I'm stuck rewritting code.... What is the freq of that counter on E-bay? Kev > Is this an adequate frequency counter for videogame repair purposes: > > Heathkit Frequency Counter Model IM-4100 > http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=289956727 > > If not, what would be a good brand/model to get that is available and cheap? > To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the message body to: techtoolslist-request(a)flippers.com. Please direct other questions, comments, or problems to jrr(a)flippers.com.

1 0

Yehaw! I got a 5400a
by FBowen＠checkfree.com 31 Mar '00

31 Mar '00

and it passes self test! I bought it off e-bay with a description reading: The front panel lost a battle of wills with our famous Arizona sun and is much curvier than HP ever planned for it to be, and the carrying handle is broken, leaving a handle "stub" on each side. I didn't think much of it until I opened it up and realized the front panel is METAL! Holy cow, somedbody must have dropped it (explains the broken handle too) or really wacked it good. Fortunately the only damage seems to be the unstable signature LED is broken or even just a disconnect between the LED and the trace. I'm definitely getting a signal to the trace. Just looking forward to doing more repairs... To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the message body to: techtoolslist-request(a)flippers.com. Please direct other questions, comments, or problems to jrr(a)flippers.com.

1 0

Re: Wico XY Pattern Generator Schematics?
by John Robertson 30 Mar '00

30 Mar '00

Have you tried asking WICO? 1-800-FOR-WICO. I would like a copy too. I have the Electrohome XY Vecotr test generator (borrowed, must return someday) but it is not a nice layout inside...single side circuit board with dozens of jumper wires...I would be willing to take a couple of hi-res pictures if someone wants to try and work out the schematic, there are no traces under the IC's...just time consuming. John :-#)# At 11:05 AM 3/30/2000 -0500, James Marous wrote: >Does anyone have copies of the manual or schematics for the Wico XY pattern >generator? Mine has some noise in the output and having the schematics >would be nice when I start working on it. > > Thanks > James > >Because We Care >James Marous > > To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the > message body to: techtoolslist-request(a)flippers.com. Please direct other > questions, comments, or problems to jrr(a)flippers.com. John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) http://www.flippers.com "Old pinballers never die, they just flip out."

2 1

Wico XY Pattern Generator Schematics?
by James Marous 30 Mar '00

30 Mar '00

Does anyone have copies of the manual or schematics for the Wico XY pattern generator? Mine has some noise in the output and having the schematics would be nice when I start working on it. Thanks James Because We Care James Marous To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the message body to: techtoolslist-request(a)flippers.com. Please direct other questions, comments, or problems to jrr(a)flippers.com.

1 0

9010A - mods to pods...
by John Robertson 27 Mar '00

27 Mar '00

Well, technically speaking it is not a pod mod, but I did make an adapter for the 6502 pod to enable me to use that for checking out 6504 based processors. The main difference between the 6502 and 6504 is the 6504 has only 12 address lines, and it is packed in a 28 pin package. I used a junk circuit board that had originally a 6802 and 6821 side by side, cut away the remnants of the rest of the board, and by adding a ZIF on the underside of the board in the 6821 mount after setting it to straddle the data pins correctly, and cutting the other traces. Then jumped the address, power and a few signal paths. Took about 1 hour start to finish, and it seems to work just fine. So now I can service my Allied Leisure MPU boards better. Need to build an I/O map next...the RAM and ROM test fine, but LOTS of I/O ports need to be figured out... John :-#)# John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) http://www.flippers.com "Old pinballers never die, they just flip out." To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the message body to: techtoolslist-request(a)flippers.com. Please direct other questions, comments, or problems to jrr(a)flippers.com.

1 0

Re: ISO: Frequency counter, Pace MBT solder and extractor
by John Robertson 23 Mar '00

23 Mar '00

I don't know how much use a frequency counter is for you, I use mine about every four or five months to check if an interrupt generator on Bally/Stern MPUs is working, but nothing else these days. Older silver age videos (B&W non microprocessor based) were the biggest user of this tool, good for following the clock divider...Often a frequency counter is built into other test items-scopes, multimeters, etc, that is the route I would go to reduce shop clutter... As for the Pace, well, the tool is not that inexpensive. I'll buy the station from you if you want to get rid of it, I have a shop use for the toy... John :-#)# At 10:57 AM 3/23/2000 -0500, FBowen(a)checkfree.com wrote: >Is this an adequate frequency counter for videogame repair purposes: > >Heathkit Frequency Counter Model IM-4100 >http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=289956727 > >If not, what would be a good brand/model to get that is available and cheap? > > >Also looking for the solder gun and extractor for a Pace MBT-200 at a >reasonable price. >I bought one of Clay's stations a few months back but haven't had much >luck finding these >at a decent price. > >Thanks! > > To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the > message body to: techtoolslist-request(a)flippers.com. Please direct other > questions, comments, or problems to jrr(a)flippers.com. John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) http://www.flippers.com "Old pinballers never die, they just flip out."

2 1