- TechToolsList - listserv.classicarcade.com

Re: [Techtoolslist] Intersil 5610 (32x8 prom)
by teeray 07 Jun '11

07 Jun '11

Has anyone tried programming the Intersil IM5610 with programmer set to Harris HM7603 ? -----Original Message----- >From: Martin White <martin(a)guddler.co.uk> >Sent: Jun 1, 2011 8:22 PM >To: Technical Tools Mail List <techtoolslist(a)flippers.com> >Subject: [Techtoolslist] Intersil 5610 (32x8 prom) > >Hi all, > >I think this has come up before, so I guess the answer is no but I figured I'd try again anyway. > >Does anyone have the programming info for the Intersil 5610 please? By that, I mean the actual documentation, rather than the device ID for the Data I/O 29B (which I have found courtesy of John). > >My programmer, the Dataman 48 Pro+ supports the 82S123 by Philips / Signetics but not the Intersil 5610. Dataman are pretty good and will add support for a "new" device provided you send in samples and info. I've been in touch and explained that I can't really spare the samples as I only have 6 left (and they're OTP) so they've kindly said they'll at least have a nose for me if I can send in the info. > >So far I've just mailed in the datasheet for the 82S123 and the 5610 but I suspect that wont be anything like enough. I suspect they'll need the programming reference too. > >Thanks, >Martin. >_______________________________________________ >Techtoolslist mailing list >Techtoolslist(a)flippers.com >http://seven.pairlist.net/mailman/listinfo/techtoolslist >FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment >Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 1

Convert Z80 pod to Z80A?
by Adam Courchesne 19 May '11

19 May '11

I seem to recall some discussion about this a while back. Is it possible? -- -Adam "Please don't judge my God by my inability to follow him" - Chris Mollins =============== www.onecircuit.com www.mapleridge.net =============== _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 1

9100A software
by John Robertson 16 Apr '11

16 Apr '11

Does anyone have non-serialized software for the 9100A...I've lost track of that project from years ago, and want to try out a SCSI to Flash adapter, but the unit I just bought has a hard drive failure... John :-#)# -- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out" _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 4

Re: [Techtoolslist] Programming 8742 for Fluke 9100 display driver
by teeray 31 Mar '11

31 Mar '11

The 8041A has 1024x8 rom and 64x8 ram The 8042 has 2048x8 rom and 128x8 ram the 8742 has 2048x8 rom and 256x8 ram so yes, you should be able to use the 8742 as long as it is fast enough Would have to look at the datasheet to find the speed. You will need a good copy of the rom code and a programmer that can program the 8742. Tim -----Original Message----- >From: Barry Shilmover <barry2(a)shilmover.com> >Sent: Mar 15, 2011 5:13 PM >To: 'Technical Tools Mail List' <techtoolslist(a)flippers.com> >Subject: Re: [Techtoolslist] Programming 8742 for Fluke 9100 display driver > >Sure... now it works! > >After trying to send the message 3 times!! > >B > >-----Original Message----- >From: techtoolslist-bounces(a)flippers.com >[mailto:techtoolslist-bounces@flippers.com] On Behalf Of Barry Shilmover >Sent: Tuesday, March 15, 2011 10:12 AM >To: jrr(a)flippers.com; 'Technical Tools Mail List' >Subject: Re: [Techtoolslist] Programming 8742 for Fluke 9100 display driver > >Thanks John. > >B > >-----Original Message----- >From: techtoolslist-bounces(a)flippers.com >[mailto:techtoolslist-bounces@flippers.com] On Behalf Of John Robertson >Sent: Tuesday, March 15, 2011 9:22 AM >To: techtoolslist(a)flippers.com >Subject: [Techtoolslist] Programming 8742 for Fluke 9100 display driver > >(from Barry Shilmover - barryshi(a)microsoft.com - who is having trouble >posting to TTL) > > >All, > > > >I have a couple of 9010As that are almost working. First the displays. > > > >On the first, the 10^th digit is out. On the second, the bottom right >element is out. Pictures: >https://cid-bba5427c148a431e.photos.live.com/browse.aspx/Fluke?wa=wsignin1.0 >&sa=2572323 ><https://cid-bba5427c148a431e.photos.live.com/browse.aspx/Fluke?wa=wsignin1. >0&sa=2572323> > > > > >Also, this chip is bad on one of them (if I swap it, it works): > >https://rqmyca.bay.livefilestore.com/y1pY3S0hpBKibGxaXT2fqnRaTXm0eTt3HOzTz9i >1wz72bUebA12DPjSCcwmtIjZJlIQkceXFvt6Fzu3S8x6sbAh3WfVTGyTCt1G/85%20(2).jpg?ps >id=1 ><https://rqmyca.bay.livefilestore.com/y1pY3S0hpBKibGxaXT2fqnRaTXm0eTt3HOzTz9 >i1wz72bUebA12DPjSCcwmtIjZJlIQkceXFvt6Fzu3S8x6sbAh3WfVTGyTCt1G/85%20%282%29.j >pg?psid=1> > > > > >I have some of these that I was told could be programmed: > >https://rqmyca.bay.livefilestore.com/y1pHgvTxDeSEiwOa1lPnpozEPN8nvl_berxBMfW >EUvcaz6MbM44sAK1KiPJbutkkPX9xDb0Nft8tZ-bhI3-6wFUopKFuVF_w3aw/87%20(2).jpg?ps >id=1 ><https://rqmyca.bay.livefilestore.com/y1pHgvTxDeSEiwOa1lPnpozEPN8nvl_berxBMf >WEUvcaz6MbM44sAK1KiPJbutkkPX9xDb0Nft8tZ-bhI3-6wFUopKFuVF_w3aw/87%20%282%29.j >pg?psid=1> > > > (suggestions welcome to fix these problems) > >Thanks, > > > >B > > > >_______________________________________________ >Techtoolslist mailing list >Techtoolslist(a)flippers.com >http://seven.pairlist.net/mailman/listinfo/techtoolslist >FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment >Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ > >_______________________________________________ >Techtoolslist mailing list >Techtoolslist(a)flippers.com >http://seven.pairlist.net/mailman/listinfo/techtoolslist >FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment >Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ > >_______________________________________________ >Techtoolslist mailing list >Techtoolslist(a)flippers.com >http://seven.pairlist.net/mailman/listinfo/techtoolslist >FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment >Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 2

Programming 8742 for Fluke 9100 display driver
by John Robertson 15 Mar '11

15 Mar '11

(from Barry Shilmover - barryshi(a)microsoft.com - who is having trouble posting to TTL) All, I have a couple of 9010As that are almost working. First the displays. On the first, the 10^th digit is out. On the second, the bottom right element is out. Pictures: https://cid-bba5427c148a431e.photos.live.com/browse.aspx/Fluke?wa=wsignin1.… <https://cid-bba5427c148a431e.photos.live.com/browse.aspx/Fluke?wa=wsignin1.…> Also, this chip is bad on one of them (if I swap it, it works): https://rqmyca.bay.livefilestore.com/y1pY3S0hpBKibGxaXT2fqnRaTXm0eTt3HOzTz9… <https://rqmyca.bay.livefilestore.com/y1pY3S0hpBKibGxaXT2fqnRaTXm0eTt3HOzTz9…> I have some of these that I was told could be programmed: https://rqmyca.bay.livefilestore.com/y1pHgvTxDeSEiwOa1lPnpozEPN8nvl_berxBMf… <https://rqmyca.bay.livefilestore.com/y1pHgvTxDeSEiwOa1lPnpozEPN8nvl_berxBMf…> (suggestions welcome to fix these problems) Thanks, B _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 2

Fluke 9010A software emulator + USB adapter... works!
by Adam Courchesne 03 Mar '11

03 Mar '11

http://forums.arcade-museum.com/showthread.php?t=173862 -- -Adam "Please don't judge my God by my inability to follow him" - Chris Mollins =============== www.onecircuit.com www.mapleridge.net =============== _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 2

Tektronix DAS 9100 Service manual
by Dave Caroline 04 Feb '11

04 Feb '11

Im looking for a manual to get my dead Tek DAS 9100 back to life one day, I have a spare one for donor parts. PDF or scan would be perfect. I may have something you need http://www.collection.archivist.info/ IS as a search term gets instruction and service IM instruction manual (no service) EQ Tech equipment I have and makers names etc I have a lot of manuals catalogued but not scanned yet. Dave Caroline _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 4

6800 => 6502 pod conversion ?
by Mike Salay 29 Jan '11

29 Jan '11

There was some discussion on this topic many moons ago, but it was not clear if anyone had succeeded in completing the operation. Can anyone confirm before I warm up the soldering iron ? Mike _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

Kurz-Kasch ROM Test II
by John Robertson 07 Jan '11

07 Jan '11

Anyone have one of these? I am in need of either schematics or some voltage measurements from the regulator PCB. Just 'won' this off eBay and it really doesn't work (not surprising given the description). The device looked useful - my assumption was it would generate a CheckSum of an Eprom inserted into the socket - it has four seven-segment displays after all! It uses a Z80 that appears to be wired up as a NOP, but it uses several voltages - perhaps -5 and +12 for the 2708s etc. I only have one socket - 2764-27128, if anyone has any of the sockets I'd be interested in pictures to try to figure out the pinout assuming no schematics or manual turns up that is! Thanks! John :-#)# -- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out" _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 4

Developing using the 9100
by Martin White 03 Jan '11

03 Jan '11

Happy New Year to everyone! I've been doing some hacking about over the holidays with code on a 6502 based PCB (Asteroids as it happens). I've got to the point where I want to debug it on the real hardware so obviously the first thing I wanted to do was try and avoid keep burning ROMs all the time. The code is only really a proof of concept so it's very small. I've relocated my code down to zero page and I can transfer it to the PCB's memory that sits from 0 - 3FF. On the 9100 that works ok. It's a bit of messing about but I can basically assemble the code, convert it to Intel Hex format, transfer it over serial link and then write it to the PCB's memory and execute it. The only caveat is that I needed to burn a dummy ROM that sits at 7800-7FFF which solely contains the interrupt and reset vectors. So far so good. The problem is that by the time I've avoided the stack that lives at page 1 (100-1FF) I'm really rather restricted on space. Also by relocating down there I loose the ability to test the code in mame as well. That's not essential but it would be nice to retain that. So does anyone know if there's any other way? Is there a way where I can keep the code where it's meant to live for instance? Preferably without hacking the PCB to put a RAM in there. The manuals for the 9100 very fleetingly mention something called POD overlay RAM which sounds very promising but I've not been able to find anything much more than just a quick mention. Any suggestions would be greatly appreciated. Martin. _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

4 6