- TechToolsList - listserv.classicarcade.com

Can you use a 63C09E CPU in a Fluke 6809 9000A pod ?
by Colin Davies 28 Aug '11

28 Aug '11

Hi Chaps I have a Konami board (Gryzor / Contra) to troubleshoot, getting a garbage screen. I've removed the old 63C09E CPU and replaced with another from a donor board and its nicely socketed. There is some better activity on the Address Bus now (some of the lines were floating on the CPU) Can I safely use this 63C09E CPU in the 6809 Fluke 9000A Pod ?? .... It's Supposed to be pin and instruction set compatiable. If not I'll use a 6809E and at least I'll be able to do some basic tests. Thanks, Colin _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

4 5

WTD: B&K manual for 1074 Yoke/Flyback analyzer
by John Robertson 26 Aug '11

26 Aug '11

How's that for ancient? Have one of these and could use it to service some of the older TVs as used in games like Computer Space... Anyone have a PDF? I'm building up a few B&K manuals for the FTP site, and shall have two new hosts for the FTP files (too many for Flippers - I'm always pushing my max size), and hope to have this sorted out be the end of August. Will put the Data IO files up and some others I've found. Thanks, John :-#)# -- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment (for now)... _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

WTB/WTD PAT 9000 extender card
by Danny Pearson 23 Aug '11

23 Aug '11

Hi, does anyone have a spare knocking about? Want to get my 9000 back up and running and this looks like it will come in handy! TIA Dan _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 3

l
by adolfo bustos 18 Aug '11

18 Aug '11

techtoolslist(a)flippers.com Hi! every one. Anyone have a copy of the "EM52.exe" program from Signum Systems for Microcontroller in circuit Emulator Model E232-52HP versions -03A apprecaited any comment. Thanks Adolfo _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

Wallchart program for Data I/O programmers
by John Robertson 19 Jul '11

19 Jul '11

Anyone have a copy of the "wallchrt.exe" program from around 1997? Earlier versions apprecaited too. The one claiming to be on the data-io ftp server times out... ftp://ftp.dataio.com/device_lists/_archive/etc/README.html Any copies (PDF) of the Data I/O wallcharts (besides 1986) appreciated as well. Thanks, John :-#)# -- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out" _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 2

Re: [Techtoolslist] Wallchart program for Data I/O programmers (found!)
by John Robertson 18 Jul '11

18 Jul '11

Hi Mario, I'd rather do grounds, power connections, etc...programming is a pain and can be a huge topic depending on the equipment the person chooses to use and what they are trying to read/verify/program. There is lots of info online too. I'll think about it, but you can see I'm not a great technical writer - have trouble with layout and sometimes ramble a bit...never had any training in the field you see. I also have little 'free' time. For the most part you guys are welcome to strip mine flippers.com for info, I do expect reasonable visible credit on any pages where my info/pictures are used (links to relevant page preferred). That allows me to edit the page (I try to never change page names!) in my fashion. You see I am used to updating my web site, and have some ideas I want to add over the next year on tech support - and have little time to re-write articles for other sites. John :-#)# Mario Van Cleave wrote: > John, > > Can I get you to submit a write up on programming fundamentals for our > new repair guide? > > Thanks, > > Mario Van Cleave > Pinrepairs.com > > On Mon, Jul 18, 2011 at 2:09 PM, John Robertson <jrr(a)flippers.com > <mailto:jrr@flippers.com>> wrote: > > John Robertson wrote: > > Anyone have a copy of the "wallchrt.exe" program from around > 1997? Earlier versions apprecaited too. The one claiming to be > on the data-io ftp server times out... > > ftp://ftp.dataio.com/device_lists/_archive/etc/README.html > > Any copies (PDF) of the Data I/O wallcharts (besides 1986) > appreciated as well. > > Thanks, > > John :-#)# > > A copy arrived in today's email (thanks Rodger!). I'll add it to > the site eventually, but as I am opening up a couple of mirrors > shortly (flippers is taking up too much space!) I'll wait until then. > > Does anyone have the old paper wall charts (schematics, > manuals...) from Data IO that covered the programming pak - this > is the pak with two rows of 28 pins (and two card inside - one > Analog and the other Data) and were specific to the various > manufacturers (Signetics, TI, Motorola, etc.). this plugs into the > 19, 29 and 29B and helps with some very obscure (read ancient) > PROM/ROMs used in early video game - I have a module for the > 82S113 and am trying to make one to read the MCM6832 Masked ROM. > Wirewrapped up an adapter for reading as a TMS2716, but the 29B > complains that the CS line doesn't turn off the data lines (tied > either high or low)... > > John :-#)# > > -- > John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 > Call (604)872-5757 <tel:%28604%29872-5757> or Fax 872-2010 > (Pinballs, Jukes, VideoGames) > www.flippers.com <http://www.flippers.com/> "Old > pinballers never die, they just flip out" > > _______________________________________________ > Techtoolslist mailing list > Techtoolslist(a)flippers.com <mailto:Techtoolslist@flippers.com> > http://seven.pairlist.net/mailman/listinfo/techtoolslist > FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment > Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ > > -- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out"

1 0

B&K CRT rejuvenator adapters
by Andrew Welburn 23 Jun '11

23 Jun '11

hi all.. I have a B&K 490 and wanted to make up an adapter for a G05 tube i need to test out, i don't have the right adapter but i do have a spare CRT neck socket from an old harness. Thing is, can't really find any pinouts online anywhere, am i missing something? I know i can work the pinouts out from looking up tubes datasheets but its a lot of hassle.. I wondered if someone had already seen this info around? -- Andrew Welburn http://www.andys-arcade.com _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 3

FLUKE 9010a option 006 software
by AL SACCO_hm 19 Jun '11

19 Jun '11

looking for tape data for fluke 9010a 006 async software...... software to setup clock module.... thanks from AL SACCO _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 1

Re: [Techtoolslist] Intersil 5610 (32x8 prom)
by Martin White 16 Jun '11

16 Jun '11

Sorry, this message won't be threaded properly as I'm on the wrong computer at the moment. Anyway, just thought I'd update on the results of this. Response back from Dataman is that they cant support the IM56xx range of proms as they need 28v VPP and the DAC in the programmer only goes up to 26v. They could make a hardware adapter but obviously they're not going to just for one equivalent make of one series of chip. So that covers: Dataman 48Pro+ BK Precision 866B Elnec Beeprog+ They're all the same programmer badged by different people. I'm guessing this likely applies to other programmers in their respective ranges, and there may also be other companies badging the same programmer. So, that completes that then :) Now starts the hunt for someone in the UK that wants to trade chips. Martin. _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 1

Intersil 5610 (32x8 prom)
by Martin White 08 Jun '11

08 Jun '11

Hi all, I think this has come up before, so I guess the answer is no but I figured I'd try again anyway. Does anyone have the programming info for the Intersil 5610 please? By that, I mean the actual documentation, rather than the device ID for the Data I/O 29B (which I have found courtesy of John). My programmer, the Dataman 48 Pro+ supports the 82S123 by Philips / Signetics but not the Intersil 5610. Dataman are pretty good and will add support for a "new" device provided you send in samples and info. I've been in touch and explained that I can't really spare the samples as I only have 6 left (and they're OTP) so they've kindly said they'll at least have a nose for me if I can send in the info. So far I've just mailed in the datasheet for the 82S123 and the 5610 but I suspect that wont be anything like enough. I suspect they'll need the programming reference too. Thanks, Martin. _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 2