- TechToolsList - listserv.classicarcade.com

Can anyone identify this chip?
by Joe Magiera 19 Nov '13

19 Nov '13

Can anyone identify the chip in the attached picture? I cannot find the manufacturer's symbol or anything related to VTI. I found one source of VTI mentioning being acquired by Murata. I wrote to them and they told me it was a different VTI. It's in a bank of 2764's, but my EETools Top Max can't read it as a 2764. I would really like to find the manufacturer's name. Thanks, Joe _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

4 4

anyone have a 6809 fluke 9010a pod for sale
by Tony htbs 12 Nov '13

12 Nov '13

anyone have a 6809 fluke 9010a pod for sale send me the price with shipping a used one is fine working or non working thank tony @ hi-tech arcade repair 33139 Gratiot Clinton twp mi 48035 586-524-0208 _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 1

OS 6.1 and 9100/A/AF/FT - anyone using one of these?
by John Robertson 09 Nov '13

09 Nov '13

A note about OS 6.1 Fired up the 9100 with a pod attached, and you get the following message: "enabled line causes timeout" In case you are wondering that is normal response for the 9100 when it starts up with a pod. I suppose that is just reminding you about what timeout errors can be caused by. That is probably because the pods were developed long before the 9100 and thus the error messages left something to be desired... I've been using the 9010 for a long time and decided that seeing as I have a stack of 9100s I really should get to know them better so will be attempting to teach myself how to use this in place of the 9010 - the advantage might be the storage of results (including ROM images) should be easier with the 9100. Has anyone else used a 9100 and stuck with it, or returned to the 9010? John :-#)# -- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 3

RE: [Techtoolslist] 6800 to 6502 pod combo ROM?
by William Stillwell 08 Nov '13

08 Nov '13

I am not sure there is a combo version? Here is the link to convert a 6800 to 6502 http://forums.arcade-museum.com/showthread.php?t=217476 -----Original Message----- From: techtoolslist-bounces(a)flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of david grohowski Sent: Friday, November 08, 2013 11:18 AM To: jrr(a)flippers.com; techtoolslist(a)flippers.com Subject: [Techtoolslist] 6800 to 6502 pod combo ROM? Is this up for d/l anywhere? thx david grohowski electronicamuse(a)aol.com _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 3

6502 pods & clocks....
by John Robertson 08 Nov '13

08 Nov '13

Tic, tock... The 6502 will clock from either a crystal or an R/C system. The problem with the R/C is the capacitor is only 10pf, so the cable capacitance will sloooowwwww the clock down somewhat (900kz to 500kz or so). So, being impatient I'm making a simple 74044 1Mhz R/C clock that fits into the Fluke adapter socket and will drive the UUT 6502 CPU directly, thus the pod won't interfere with the clock frequency and I won't get any more timeout errors (I hope). John :-#)# -- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 3

Ivan 'Ironman' Stewart's Super Off Road trac pac fluke 9010a script
by sales htbs 04 Nov '13

04 Nov '13

Subject: Ivan 'Ironman' Stewart's Super Off Road trac pac fluke 9010a script Anyone have a script for Ivan 'Ironman' Stewart's Super Off Road trac pac fluke 9010a script I tried to learn a good board and it did not work I cannot find a memory map for this on quarter arcade I ran the Leland test for bottom board I have 3 board sets that I am working on 1 has the split screen track on top Other 2 were dead Any help would be great Thanks tony @ hi-tech _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

Re: [Techtoolslist] WTTF 6502 POD for Fluke 9010a
by JJ 31 Oct '13

31 Oct '13

I might have a couple. I can look later tonight. Justin Sent from my Verizon Wireless 4G LTE DROID Grant Thienemann <grant.thienemann(a)gmail.com> wrote: >Hey Guys, > >I have several duplicate Fluke pods, off the to pof my head a Z80, 8080 I >believe and a couple of other odd ball pods. I really need a 6502 pod, if >you have one please let me know! > >Thanks >Grant >_______________________________________________ >Techtoolslist mailing list >Techtoolslist(a)flippers.com >http://seven.pairlist.net/mailman/listinfo/techtoolslist >FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment >Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

5 10

WTTF 6502 POD for Fluke 9010a
by Grant Thienemann 31 Oct '13

31 Oct '13

Hey Guys, I have several duplicate Fluke pods, off the to pof my head a Z80, 8080 I believe and a couple of other odd ball pods. I really need a 6502 pod, if you have one please let me know! Thanks Grant _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 2

MISSILE COMMAND fluke 9010a error on fide 4.1.9
by tonyhtbsusa 21 Oct '13

21 Oct '13

I am trying to use the quarter arcade page to generate this script I copy and paste it into fide right off the generator page on quarter arcade And I keep getting errors when I go to send it to 9010a Any help on what I am doing wrong And how to set up these scripts to run would be great I also posted what I used Why am I getting the warning of file already exists , It looks like it is saving it in 2 spots I did hit the compile button to see if it would fix it Same error Thanks tony Here is what I get Starting process... WARNING: Include file already exists. File may have been included multiple times, or two files with the exact same file name may exist. It is recommended that you give your files distictive file names. C:\Program Files\Fluke FIDE\Scripts\Atari\mis\miss.9lc -> C:\Program Files\Fluke FIDE\Internal\miss.9lc (exists). 9010A Language Compiler - Version 1.2 Copyright(c) 1983 John Fluke Mfg. Co., Inc. line 177: program 03582002 >>Illegal program number Processing completed. SYSTEM ERROR: 380: Invalid property value ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !! ! ! Fluke 9010A Code Generator ! Process copyright QuarterArcade.com, LLC ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! !! SETUP CODE !! Purpose: To set the pod include file and the pod being used, as well as !! relevant setup conditions. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! setup include "6502.pod" POD 6502 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! !! SUB: Main !! PURPOSE: Start the process. Introduce the program to refresh the !! operator's memory, and enter into the main menu. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! program Main declarations !! Intro execute QuarterArcadeLogo !! Short delay to introduce program dpy MISSILE COMMAND - MISSILE aux MISSILE COMMAND - MISSILE REG8 = 10 execute DelayTics8 execute MainMenu !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! !! SUB: MainMenu !! PURPOSE: Give the user options to select from in menu format. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! program MainMenu declarations assign REGB to Input MenuLp: Input = 0 aux _ aux _ aux MAIN MENU aux ____1=ROMMenu aux _ aux _ aux MENU COMMAND> dpy CMD> 1 execute GetKey if Input = 1 goto Menu1 !! hooks to ROMMenu goto MenuLp Menu1: !! ROMMenu execute ROMMenu dpy # dpy TEST DONE aux TEST DONE execute GetKey goto MenuLp MenuF: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! !! SUB: ROMMenu !! PURPOSE: Give the user options to select from in menu format. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! program ROMMenu declarations assign REGB to Input MenuLp: Input = 0 aux _ aux _ aux ROM MENU aux ____1=3582002 aux ____2=03582102 aux ____3=03582202 aux ____4=03582302 aux ____5=03582402 aux ____6=03582502 aux ____E=TEST ALL aux _ aux ____F=RETURN aux _ aux MENU COMMAND> dpy CMD> 1-6,E=ALL,F=UP execute GetKey if Input = 1 goto Menu1 !! hooks to 03582002 if Input = 2 goto Menu2 !! hooks to 03582102 if Input = 3 goto Menu3 !! hooks to 03582202 if Input = 4 goto Menu4 !! hooks to 03582302 if Input = 5 goto Menu5 !! hooks to 03582402 if Input = 6 goto Menu6 !! hooks to 03582502 if Input = E goto MenuE !! hooks to all tests goto MenuLp Menu1: !! 03582002 execute 03582002 dpy # dpy TEST DONE aux TEST DONE execute GetKey goto MenuLp Menu2: !! 03582102 execute 03582102 dpy # dpy TEST DONE aux TEST DONE execute GetKey goto MenuLp Menu3: !! 03582202 execute 03582202 dpy # dpy TEST DONE aux TEST DONE execute GetKey goto MenuLp Menu4: !! 03582302 execute 03582302 dpy # dpy TEST DONE aux TEST DONE execute GetKey goto MenuLp Menu5: !! 03582402 execute 03582402 dpy # dpy TEST DONE aux TEST DONE execute GetKey goto MenuLp Menu6: !! 03582502 execute 03582502 dpy # dpy TEST DONE aux TEST DONE execute GetKey goto MenuLp MenuE: !! All tests execute 03582002 execute 03582102 execute 03582202 execute 03582302 execute 03582402 execute 03582502 dpy # dpy TESTS DONE aux TESTS DONE execute GetKey goto MenuLp MenuF: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! !! Program: 03582002 !! Purpose: Tests one ROM. $5000-$57FF !! Generated ROM test !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! program 03582002 dpy ROM test @ 5000-57FF sig F25A aux ROM test @ 5000-57FF sig F25A ROM test @ 5000-57FF sig F25A !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! !! Program: 03582102 !! Purpose: Tests one ROM. $5800-$5FFF !! Generated ROM test !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! program 03582102 dpy ROM test @ 5800-5FFF sig 3977 aux ROM test @ 5800-5FFF sig 3977 ROM test @ 5800-5FFF sig 3977 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! !! Program: 03582202 !! Purpose: Tests one ROM. $6000-$67FF !! Generated ROM test !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! program 03582202 dpy ROM test @ 6000-67FF sig E850 aux ROM test @ 6000-67FF sig E850 ROM test @ 6000-67FF sig E850 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! !! Program: 03582302 !! Purpose: Tests one ROM. $6800-$6FFF !! Generated ROM test !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! program 03582302 dpy ROM test @ 6800-6FFF sig EF62 aux ROM test @ 6800-6FFF sig EF62 ROM test @ 6800-6FFF sig EF62 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! !! Program: 03582402 !! Purpose: Tests one ROM. $7000-$77FF !! Generated ROM test !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! program 03582402 dpy ROM test @ 7000-77FF sig B25D aux ROM test @ 7000-77FF sig B25D ROM test @ 7000-77FF sig B25D !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! !! Program: 03582502 !! Purpose: Tests one ROM. $7800-$7FFF !! Generated ROM test !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! program 03582502 dpy ROM test @ 7800-7FFF sig B888 aux ROM test @ 7800-7FFF sig B888 ROM test @ 7800-7FFF sig B888 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! !! Program: KeyEnable !! Purpose: Wait for a key to be pressed !! Inputs: none !! Output: Reg B = 40; toggles the enabling of asynchronous keyboard interrupt !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! program KeyEnable REGB = 40 !Initialize reg B dpy-+%B !Enable key interrupt to reg B !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! !! Program: GetKey !! Purpose: Wait here until a key is pressed !! Inputs: none !! Calls to: KeyEnable !! Outputs: Register B = the value of a key pressed (0-3F) !! Based on program found in the GFI example from Fluke's documentation !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! program GetKey execute KeyEnable ! Enable interrupt 1: LABEL 1 if REGB = 40 goto 1 ! Loop till key pressed (<40) !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! !! Program: DelayTics8 !! Purpose: Delays the number of tics specified by REG8 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! program DelayTics8 REG1 = REG8 dloop: dec REG1 if REG1 > 0 goto dloop !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! !! Program: QuarterArcadeLogo !! Purpose: I'm a geek. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! program QuarterArcadeLogo dpy TECH.QUARTERARCADE.COM aux TECH.QUARTERARCADE.COM REG8 = 10 execute DelayTics8 _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 2

Atari Catbox Guide?
by Grant Thienemann 16 Sep '13

16 Sep '13

Hey Guys, I've got an Atari Catbox that I really want to start utilizing to fix various Atari PCBs I have, specifically my Asteroids, Battlezone, Red Baron and Missile Command. I do have the original user manual for the Catbox, but I was wondering if anyone has ever done a more step by step write up for how to use this awesome device. If anyone can point me to a guide or just give a quick how-to so I know I'm using this tool correctly that would be fantastic! Thanks Grant Thienemann _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

4 4