- TechToolsList - listserv.classicarcade.com

RE: pole position 1&2 rom's & checksum
by htbsusa 30 Jan '03

30 Jan '03

3 2

pole position 1&2 rom's & checksum
by sales＠htbsusa 29 Jan '03

29 Jan '03

1 0

Re: So what is the GFI switch do on the 9010A?
by Adam Courchesne 29 Jan '03

29 Jan '03

I think the GFI was an option for those wising to use their Fluke in the bathtub. :-) -Adam >From: John Robertson <jrr(a)flippers.com> >To: "Kev" <KKlopp(a)erols.com>, <TechToolsList(a)flippers.com> >Subject: Re: So what is the GFI switch do on the 9010A? >Date: Tue, 28 Jan 2003 16:21:24 -0800 > >Ground Fault Indicator? Never heard of that on the 9010A's, might be useful >on a long RS-232 line. > >John :-#)# > >At 05:44 PM 28/01/2003 -0500, Kev wrote: >>I noticed the 9010A up on e-bay today had a GFI switch on the back & >>software to match (2.0). >> >>How does this switch/software work? >> >>How is the firmware (software) related to the non GFI software? (Which is >>older?) >> >>Thanks, >>Kev >> >> >> _________________________________________________________________ The new MSN 8: advanced junk mail protection and 2 months FREE* http://join.msn.com/?page=features/junkmail

2 1

Re: 9100 Monitors
by Amplifone＠aol.com 29 Jan '03

29 Jan '03

2 1

9100 Monitors
by Kev 29 Jan '03

29 Jan '03

2 2

Fw: FS Fluke Pods 6502,Z80,etc Fluke 9020 Fluke 9010
by Kev 22 Jan '03

22 Jan '03

Just incase someone missed it.... ----- Original Message ----- From: "Artfromny" <a218(a)aol.com> Newsgroups: rec.games.video.arcade.collecting Sent: Wednesday, January 15, 2003 9:32 PM Subject: FS Fluke Pods 6502,Z80,etc Fluke 9020 Fluke 9010 > I have a limited number of these available > > Z80 - $269 shipped > 6502 - $329 shipped > 10% off if you buy both > > Grab a Fluke 9020 and the 6502 pod, and you have a CAT box replacement that is > far more versatile than the original. > > These pods are tested, and are guaranteed no DOA. In addition to the selftest, > each pod has been used on an actual game pcb to test RAM and Rom and write to > and read from RAM addresses, and to run the board under test. > > I also have a limited number of Fluke 9020s available, $269 per, tested as > above. I have one 9010 available, as above, tape drive defective, for $319. > > I also have pods for 6800,6802,6809, 8080 and 8085 - havent checked or priced > them yet. > > Art

1 2

More Tek 85xx devel system questions
by Tom McClintock 20 Jan '03

20 Jan '03

Hey Guys, A couple of months ago I asked about a Tek 85xx development system and, more specifically, the type of backup system it uses. The backup discs in question were finally read with a a catweasel bit level reader. The data from those discs is cleartext, but Tek used something on the 85xx devel system called 'fbu' to make them. Anyone have a clue what 'fbu' is and any information on Tek's floppy archiving format in general that might help decode these things? tm

1 0

Re: Did the 9005 come with Async hardware?
by Kurt Mahan 15 Jan '03

15 Jan '03

My 9005 does NOT have the async option installed. Kurt > http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3D3200885816&category=3D= > 13718 > > It looks like it has the Async option installed. > > Is this normal for the 9005? > > Thanks, > Kev

1 0

Fw: Available Fluke 9000 series gear
by Kev 15 Jan '03

15 Jan '03

1 2

Fluke tapes on EBay...
by John R 10 Jan '03

10 Jan '03

Spotted this: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=25414&item=310572562… Box of NOS tapes that look like they will work for the 9010A John :-#)#

1 0