- TechToolsList - listserv.classicarcade.com

Compressing the PDFs in TTL....help wanted!
by John Robertson 17 Nov '02

17 Nov '02

I am slowly working through the PDFs compressing (using Adobe 4.0 Capture), and if anyone wants to help that would be great. Takes about 1 hour per manual or less...one can get a 10 fold (+) reduction in size! Volunteers line forms on the right... John :-#)# How to subscribe or unsubscribe from TTL To do either you send email to "MajorDomo(a)flippers.com" and in the body you state either "Subscribe techtoolslist" or "Unsubscribe techtoolslist", note that the Subject is "" (Blank)... FTP site is: ftp://ftp.flippers.com/TTL/

1 0

Re: Dig Dug & 9010
by Kev 17 Nov '02

17 Nov '02

3 4

Re: Dig Dug & 9010
by Kev 17 Nov '02

17 Nov '02

2 1

Anyone Done Fluke scripts for 8255s yet?
by Kev 17 Nov '02

17 Nov '02

1 0

Dig Dug & 9010
by David Shoemaker 17 Nov '02

17 Nov '02

1 0

ML4400 manual now up...
by John Robertson 15 Nov '02

15 Nov '02

A fellow in Australia has emailed us the ML4400 users manual and it is up at ftp.flippers.com/TTL in the Arium ML4400 directory. I am slowly doing a page capture to compress it.... John :-#)#

2 1

RASTER: Missle Command and Fluke 9010
by David Shoemaker 11 Nov '02

11 Nov '02

1 0

Re: Fluke & Dynamic Ram test?
by Kev 10 Nov '02

10 Nov '02

Well my biggest problem is the Williams video boards of the early 80s. If you put the 9100 in auto RAM test mode this will fail because (I'm guessing here) that it isn't properly writing & reading from the 2nd page of the RAM & higher. If you manual do 2 writes & 2 reads it works fine but the auto test cann't handle it. There is a big write up in the 9100 Application manual specifically on handling Dynamic RAMs but I figured I'd solict for a bit of insight first. Thanks, Kev >I don't see how testing dynamic would be any different than testing static, >both look the same to the CPU....if you want to test the individual ICs >then you need to pick up a BugTrap Dynamic Ram tester...or similar that >will check the old timers. > >You can replace dynamic with static if you are so inclined with just >getting the addressing and select sorted out. Static ram is much faster now >than it was back in the 70/80's and can easily do the job. > >Or do I not understand the problem you are proposing? > >John :-#)# > >At 09:08 AM 10/11/2002 -0500, Kev wrote: > > >>Has anyone built any programs to do Dynamic Ram test for either the 9010 or >>9100? >> >>I'm looking for something that would cover 4116 &/or 4164s. >> >>Thanks, >>Kev >

2 2

HP16500A Disks
by Kurt Mahan 10 Nov '02

10 Nov '02

I've got an HP16500A that I need to get a set of disks for. Does anybody have a set they could dup? Or anybody want to part with an HP16500B/C mainframe so I could move to DOS? I'd also like to get the disks for the peripherals I've got: HP16510A HP16540A / HP16541D (these are a set) If anybody could point me in the right direction I'd really appreciate it! Thanks! Kurt kmahan(a)xmission.com

1 0

9010 Schematics
by Kurt Mahan 10 Nov '02

10 Nov '02

Could someone point me to the 9010 schematics? For some reason I thought I had saved a link to them but I can't find it. Thanks! Kurt kmahan(a)xmission.com

1 0