- TechToolsList - listserv.classicarcade.com

Device Programmer
by Franklin Bowen 19 Feb '04

19 Feb '04

I've been tracking and bidding on some Data I/O 29B & Unipak 2B combos on E-bay but the ones that look promising (power-up and not missing the big programming socket on the 2B) are all going for above $100. Will a SYSTEM 19 or 29A & Unipak do? Would I notice the difference since 95% of my game boards are from the 80s? Do the Unipaks work on any base (without supporting the additional devices) or must they be paired correctly (29A & Unipak vs. 29B & Unipak 2B)? Any other programmers I should look out for that seem to be a consensus good choice? Thanks! PS I searched the vectorlist/tech tools archive and maybe I'm being overly influenced by the couple of messages that proclaim these items are plentiful and available for < $50 on E-bay! :-) -- Franklin Bowen (Franklin(a)Bowen.net) http://fmbbowen.com:39353 If you ever want to (un)subscribe yourself with TTL, you can send mail to: <Majordomo(a)flippers.com> with the following command in the body of your email message: (un)subscribe techtoolslist or from another email account, besides xxx(a)yyy.com: (un)subscribe techtoolslist xxx(a)yyy.com

2 1

Using Bugtrap on Pac boards
by Electronicamuse＠aol.com 19 Feb '04

19 Feb '04

1 0

Good and cheap sour of Prototype PCB
by pc2jamma 11 Feb '04

11 Feb '04

Hi Guys ! Does anyone know some source for prototype PCB. I'm building one MB14241 daughter card, and now it's time to test it. I don't want to wire about 160 nets using wire warp... it's so boring... I'm trying to contact Futurlec (www.futurlec.com) but with no success.. Thank you Jose Luiz Martins If you ever want to (un)subscribe yourself with TTL, you can send mail to: <Majordomo(a)flippers.com> with the following command in the body of your email message: (un)subscribe techtoolslist or from another email account, besides xxx(a)yyy.com: (un)subscribe techtoolslist xxx(a)yyy.com

3 2

RE: 9010A RS232 cable
by Joe 10 Feb '04

10 Feb '04

Good question easy answer. Make yourself a Null modem cable... Pin outs are readily available on the net. Try here: http://www.infonewsindia.com/pinout/#8 Basically, connect all the pins... Or just buy a null modem cable - they're cheap! JB -----Original Message----- From: owner-techtoolslist(a)flippers.com [mailto:owner-techtoolslist@flippers.com] On Behalf Of Martin White Sent: Monday, February 09, 2004 3:06 PM To: techtoolslist(a)flippers.com Subject: 9010A RS232 cable Can anyone tell me how to make one of these up please? I have the diagram in the manual that shows me the pinouts for the 25way on the back of the Fluke, and i have an old laptop with a 9way serial on that back that i want to connect it to. Cheers, Martin. If you ever want to (un)subscribe yourself with TTL, you can send mail to: <Majordomo(a)flippers.com> with the following command in the body of your email message: (un)subscribe techtoolslist or from another email account, besides xxx(a)yyy.com: (un)subscribe techtoolslist xxx(a)yyy.com --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com) Version: 6.0.577 / Virus Database: 366 - Release Date: 2/3/2004 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com) Version: 6.0.577 / Virus Database: 366 - Release Date: 2/3/2004 If you ever want to (un)subscribe yourself with TTL, you can send mail to: <Majordomo(a)flippers.com> with the following command in the body of your email message: (un)subscribe techtoolslist or from another email account, besides xxx(a)yyy.com: (un)subscribe techtoolslist xxx(a)yyy.com

1 0

9010A RS232 cable
by Martin White 09 Feb '04

09 Feb '04

Can anyone tell me how to make one of these up please? I have the diagram in the manual that shows me the pinouts for the 25way on the back of the Fluke, and i have an old laptop with a 9way serial on that back that i want to connect it to. Cheers, Martin. If you ever want to (un)subscribe yourself with TTL, you can send mail to: <Majordomo(a)flippers.com> with the following command in the body of your email message: (un)subscribe techtoolslist or from another email account, besides xxx(a)yyy.com: (un)subscribe techtoolslist xxx(a)yyy.com

1 0

Is a Protek 506 DMM any good?
by Franklin Bowen 05 Feb '04

05 Feb '04

Looking for a replacement/upgrade to my current DMM. Any obvious deficiencies? http://www.hcprotek.com/ProdInfo.asp?prodId=506 Thanks! -- Franklin Bowen (Franklin(a)Bowen.net) http://fmbbowen.com:39353 If you ever want to (un)subscribe yourself with TTL, you can send mail to: <Majordomo(a)flippers.com> with the following command in the body of your email message: (un)subscribe techtoolslist or from another email account, besides xxx(a)yyy.com: (un)subscribe techtoolslist xxx(a)yyy.com

2 1

WTD: INS8060 Pinout/Datasheet
by kklopp 27 Jan '04

27 Jan '04

Have had no luck finding anything on this processor yet. Can anyone point me to a site or shoot me a file/PDF? National Semiconductor 8060 circa 1976 (found on early Zacaria pins) if you want to e-mail me a sizable file please warn me first. Thanks, Kev www.erols.com/mowerman If you ever want to (un)subscribe yourself with TTL, you can send mail to: <Majordomo(a)flippers.com> with the following command in the body of your email message: (un)subscribe techtoolslist or from another email account, besides xxx(a)yyy.com: (un)subscribe techtoolslist xxx(a)yyy.com

2 3

TTL Message board?
by Adam Courchesne 26 Jan '04

26 Jan '04

Hey guys.. ever thought of putting up a TTL message board? It occurred to me when Joe sent his last message and there were about 6 or so followups.. each a followup of another. Seems a message board would be nice cuz you can see the entire thread. Seems pretty simple to setup... just grab a copy of phpBB and you're off. Your thoughts? -Adam _________________________________________________________________ There are now three new levels of MSN Hotmail Extra Storage! Learn more. http://join.msn.com/?pgmarket=en-us&page=hotmail/es2&ST=1 If you ever want to (un)subscribe yourself with TTL, you can send mail to: <Majordomo(a)flippers.com> with the following command in the body of your email message: (un)subscribe techtoolslist or from another email account, besides xxx(a)yyy.com: (un)subscribe techtoolslist xxx(a)yyy.com

4 3

RE: WTD: INS8060 Pinout/Datasheet
by Joe 26 Jan '04

26 Jan '04

May also want to try here: http://members.aol.com/mk14emu/datash.htm JB -----Original Message----- From: owner-techtoolslist(a)flippers.com [mailto:owner-techtoolslist@flippers.com] On Behalf Of Rodger Boots Sent: Monday, January 26, 2004 2:23 AM To: kklopp(a)erols.com Cc: techToolsList(a)flippers.com Subject: Re: WTD: INS8060 Pinout/Datasheet Yup, it's a SC/MP II, see the web page at http://www.realtime.net/~cfb/SCMP_Componentside.html kklopp wrote: >Have had no luck finding anything on this processor yet. > >Can anyone point me to a site or shoot me a file/PDF? > >National Semiconductor 8060 circa 1976 > >(found on early Zacaria pins) > >if you want to e-mail me a sizable file please warn me first. > >Thanks, >Kev >www.erols.com/mowerman > >If you ever want to (un)subscribe yourself with TTL, you can send mail to: ><Majordomo(a)flippers.com> >with the following command in the body of your email message: >(un)subscribe techtoolslist >or from another email account, besides xxx(a)yyy.com: >(un)subscribe techtoolslist xxx(a)yyy.com > > > > If you ever want to (un)subscribe yourself with TTL, you can send mail to: <Majordomo(a)flippers.com> with the following command in the body of your email message: (un)subscribe techtoolslist or from another email account, besides xxx(a)yyy.com: (un)subscribe techtoolslist xxx(a)yyy.com If you ever want to (un)subscribe yourself with TTL, you can send mail to: <Majordomo(a)flippers.com> with the following command in the body of your email message: (un)subscribe techtoolslist or from another email account, besides xxx(a)yyy.com: (un)subscribe techtoolslist xxx(a)yyy.com

1 0

RE: For the love of 2716...!
by Joe 25 Jan '04

25 Jan '04

They're pin compatible for usage in a board.. just plug and play.. I mix them all the time... -----Original Message----- From: owner-techtoolslist(a)flippers.com [mailto:owner-techtoolslist@flippers.com] On Behalf Of James Bright Sent: Saturday, January 24, 2004 7:15 PM To: techToolsList(a)flippers.com Subject: For the love of 2716...! Anyone know where (physically) on the Centipede board is the jumpers for making a board use 2716 versus 2516? I'm out of 2516s but I need to replace a few ROMs on one board and based on visual inspection I don't see a different between a board using 2516 and one using 2716. Thanks. --James Bright www.QuarterArcade.com Restored Arcade Games for your Home If you ever want to (un)subscribe yourself with TTL, you can send mail to: <Majordomo(a)flippers.com> with the following command in the body of your email message: (un)subscribe techtoolslist or from another email account, besides xxx(a)yyy.com: (un)subscribe techtoolslist xxx(a)yyy.com If you ever want to (un)subscribe yourself with TTL, you can send mail to: <Majordomo(a)flippers.com> with the following command in the body of your email message: (un)subscribe techtoolslist or from another email account, besides xxx(a)yyy.com: (un)subscribe techtoolslist xxx(a)yyy.com

1 0