- TechToolsList - listserv.classicarcade.com

Parallel Port Ram Tester from Brazil!
by John Robertson 29 Dec '03

29 Dec '03

One of our new members (Luiz) was attempting to post a note on a project of his, but it was too long (embedded JPG) and I think he might be on vacation (or something) so I'll edit and post it for him...(I've put his schematics in their own folder on the ftp site (RamTester)). Unfortunately I have been unable to extract the JPG from his huge post...hoping he'll send it to me! John :-#)# -----------------------(original)----------------------------------------------- Hello Folk! I decide to start building one PC (Parallel port) Based SRAM Tester, after some attempts to use old tester on fast PCs with no success, and due to prohibitive prices of modern one. For me, in Brazil, it costs about 2,000 Dollars !!!! The first part of this project is a simple 2114 Tester, and the next step will be accept 5101, 4116, 6116 and finally 6281. My target is build one TTL and CMOS Tester as well. I'll share with you guys this project, and I'll be very glad to hear suggestions and answer all your questions. Attached, you are receiving it's schematics, and this weekend I'll write it's code. I did this project as simple as possible, using one CD4040 (12 binary Counter) to generate the address line, one 74LS245 (Octal Bus Transceiver) as data buffer and to protect the PC's RS232 port. Thank you for your time reading this e-mail, and I'm sorry for the grammatical errors ! Luiz Martins Paulo / Brazil How to subscribe or unsubscribe from TTL To do either you send email to "MajorDomo(a)flippers.com" and in the body you state either "Subscribe techtoolslist" or "Unsubscribe techtoolslist", note that the Subject is "" (Blank)... FTP site is: ftp://ftp.flippers.com/pub/TTL/

1 0

Test enclosures?
by James Bright 23 Dec '03

23 Dec '03

2 2

RE: Xlink software
by Joe 19 Dec '03

19 Dec '03

Well, I found out this is actually a repackaged AllMax+. SO, I went out to EETools site and grabbed the software. Now, does anyone know the pinouts for the power connector? Thanks, JB -----Original Message----- From: owner-techtoolslist(a)flippers.com [mailto:owner-techtoolslist@flippers.com] On Behalf Of Joe Sent: Sunday, December 14, 2003 3:29 AM To: techtoolslist(a)flippers.com Subject: Xlink software Does anyone out there have the software for a Logical Devices Chip Master 2000? I believe the needed software is X-link. If you can help me out, it'd be much appreciated! Thanks, Joe If you ever want to (un)subscribe yourself with TTL, you can send mail to: <Majordomo(a)flippers.com> with the following command in the body of your email message: (un)subscribe techtoolslist or from another email account, besides xxx(a)yyy.com: (un)subscribe techtoolslist xxx(a)yyy.com If you ever want to (un)subscribe yourself with TTL, you can send mail to: <Majordomo(a)flippers.com> with the following command in the body of your email message: (un)subscribe techtoolslist or from another email account, besides xxx(a)yyy.com: (un)subscribe techtoolslist xxx(a)yyy.com

1 0

WTB/WTT: Fluke 6809 pod
by Kurt Mahan 19 Dec '03

19 Dec '03

Anybody have a spare 6809 pod for a 9010 that they would like to part with? While working would be nice it isn't essential. Please email me so we don't spam the list. Thanks, Kurt kmahan(a)xmission.com If you ever want to (un)subscribe yourself with TTL, you can send mail to: <Majordomo(a)flippers.com> with the following command in the body of your email message: (un)subscribe techtoolslist or from another email account, besides xxx(a)yyy.com: (un)subscribe techtoolslist xxx(a)yyy.com

1 0

Xlink software
by Joe 14 Dec '03

14 Dec '03

Does anyone out there have the software for a Logical Devices Chip Master 2000? I believe the needed software is X-link. If you can help me out, it'd be much appreciated! Thanks, Joe If you ever want to (un)subscribe yourself with TTL, you can send mail to: <Majordomo(a)flippers.com> with the following command in the body of your email message: (un)subscribe techtoolslist or from another email account, besides xxx(a)yyy.com: (un)subscribe techtoolslist xxx(a)yyy.com

1 0

FA: Needham's PB-10 EPROM Programmer Burner, ISA version
by Franklin Bowen 08 Dec '03

08 Dec '03

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=1504&item=2579972901 I am also auctioning some older computer cards and equipment so see my other auctions if you're interested in any of that. PS My collection of BattleZone for PC CDs is also up for auction. I enjoyed the whole series. -- Franklin Bowen (Franklin(a)Bowen.net) http://fmbbowen.com:39353 If you ever want to (un)subscribe yourself with TTL, you can send mail to: <Majordomo(a)flippers.com> with the following command in the body of your email message: (un)subscribe techtoolslist or from another email account, besides xxx(a)yyy.com: (un)subscribe techtoolslist xxx(a)yyy.com

1 0

RASTER: FA: Needham's PB-10 EPROM Programmer Burner, ISA version
by Franklin Bowen 07 Dec '03

07 Dec '03

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=1504&item=2579972901 I am also auctioning some older computer cards and equipment so see my other auctions if you're interested in any of that. PS My collection of BattleZone for PC CDs is also up for auction. I enjoyed the whole series. -- Franklin Bowen (Franklin(a)Bowen.net) http://fmbbowen.com:39353 --------------------------------------------------------------------------- ** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in the ** message body to rasterlist-request(a)vectorlist.org. Please direct other ** questions, comments, or problems to chris(a)westnet.com.

1 0

WTT: My SW CPO for Fluke 9010 training
by Electronicamuse＠aol.com 07 Dec '03

07 Dec '03

2 1

big pile of 9100 stuff on ebay
by Aaron Nabil 05 Dec '03

05 Dec '03

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2579247772 If you ever want to (un)subscribe yourself with TTL, you can send mail to: <Majordomo(a)flippers.com> with the following command in the body of your email message: (un)subscribe techtoolslist or from another email account, besides xxx(a)yyy.com: (un)subscribe techtoolslist xxx(a)yyy.com

3 2

9100 Floppy drives.
by John Robertson 04 Dec '03

04 Dec '03

I have a couple of dead floppies on my 9100's and was wondering if anyone knows how to set up a 1.44 to run on them. The Drive Select has to "0", but then nothing much happens. The latest version of the System setup disc (Rv1.4 - for SCSI) seems to support the Canon HD drive but I have no idea what drive that was supposed to be. The drives supported (Rv1.4) are: Canon (MD350) Sony F17 TEAC FD235 Mitsu(mi?) MF355C Canon HD (unknown model) The service manual says (Pg 3-34) that the floppy control lines are: DS0, DS1 (Drive Selects - D0 for 9100) Spare (not used - is this the High Density enable?) MINI (selects floppy clock speed for 5-1/4 & 3-1/2 or 8") DENS (single or double density - but how does this fit in with a Canon HD drive?) P0, P1 (write pre-compensation time 0, 125ns, 250ns, or 375ns) EN-ENT (Floppy Interrupt) Anyone have info on any of these drives and can identify the parameters needed? Thanks! John :-#)# How to subscribe or unsubscribe from TTL To do either you send email to "MajorDomo(a)flippers.com" and in the body you state either "Subscribe techtoolslist" or "Unsubscribe techtoolslist", note that the Subject is "" (Blank)... FTP site is: ftp://ftp.flippers.com/TTL/

1 1