September 2016 - TechToolsList - listserv.classicarcade.com

Anyone have any spare Fluke pod cases?
by Tony Jones 25 Sep '16

25 Sep '16

I know lots of us keep junkers for the electronics. I'm looking for a couple of pod cases (just the plastic outer shell). 8088 and 8051. I just need the top of the 8088 and bottom of the 8051 but I'll take the complete cases also. Obviously equivalent form factor will work in a pinch (though the correct info stickers would be nice). Thanks! _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

Re: [Techtoolslist] Fluke 1802 pod probe head part#
by Tony Jones 24 Sep '16

24 Sep '16

I have the manual. I'll scan it in. It didn't dawn on me to check it for the part#. Doh! Interesting it shares the same cable as the 8041/8051 pods as they are pretty dissimilar. _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 2

Fluke 1802 pod probe head part#
by Tony Jones 24 Sep '16

24 Sep '16

Does anyone know the part# (6 digits) for the 1802 pod probe head? It's not listed on the flippers page. I have one in NOS condition but it has broken pins on the probe head. The cable part# on it was 680595 but this is normally for the 8048/8041 and,8051 pods. I tried another 680595 cable but it's still not working. It's pretty worthless so if the cable is correct and it's just dead, I'm going to cannibalize it for parts. _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 3

Kursh Kash cards available for sale or trade?
by Joe Magiera 22 Sep '16

22 Sep '16

Does anyone have any Kursch Kash cards 309, 309a, 309a1, 309a2 or 309b available for sale or trade? Trying to help a buddy out looking for these. I could have those numbers wrong, but they are all 309 for sure. Please let me know. Thanks, Joe _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 2

Quarter arcade 9010a rom signatures broken?
by David Shoemaker 11 Sep '16

11 Sep '16

I have been working on some MCR boards and I am getting different rom signatures than what the http://tech.quarterarcade.com/tech/VM.aspx?g=1421 <http://tech.quarterarcade.com/tech/VM.aspx?g=1421&set=kick> &set=kick says. I have tried this with Kick (upright and cocktail) and Tron (all versions). Doing this against known working boards. I use the 9010 to generate signatures for rom blocks and they just don't match. Can anyone check something else and see if they get rom signatures that match? Or is there a bug in the sig generation on the page? Thanks, David _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

4 5

textool 268-5400 sockets
by Tony Jones 08 Sep '16

08 Sep '16

Hi. Does anyone have any of these in their spares drawer? Textool 268-5400. I have a several Fluke 80x86 pods that work but have lost their connectors. I just bought a couple off eBay but need a couple more. \ Thanks for any help! pics: https://www.amazon.com/clouddrive/share/X2jAffjOUZMDAuXJkP1vCwtw1yFDf5AYXaG… https://www.amazon.com/clouddrive/share/3PTVicheEY2SnnvameBvBilV9hJOwyaOoxv… _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

Re: [Techtoolslist] leland off road pal dump needed u85
by Fabrizio Vasile 08 Sep '16

08 Sep '16

Il 16/03/2015 21:33, Clay Cowgill ha scritto: >> I was aware of this possibility of dumping PLD like a normal EPROM but >> there could be issue with some programmers. > Shouldn't be. It's a five volt part and since you're not writing data to > the part the lack of OE shouldn't be an issue. (I suppose if you were > particularly concerned you could just buffer the output pins with a '244 > connected to the 2716's CE's and OE.) /*I mean the programmer you are going to use for dumping a PLD as EPROM must *//**//*actually drive the pins both high and low for this to work.Some programmers only drive LOW the pins and use pull-up resistors to force them HIGH. Anyway, like Charles MacDonald explain here: http://dreamjam.co.uk/emuviews/old2009.php you can also read a PAL as a 27C020 EPROM using this simple adapter: http://dreamjam.co.uk/emuviews/temp/adapter2.png *//*/*You will get a 256KB dump that can be analized with his analysing software in order to recompile equations in a GAL16V8 replacement*/ */ > > -Clay > > _______________________________________________ > Techtoolslist mailing list > Techtoolslist(a)flippers.com > https://pairlist7.pair.net/mailman/listinfo/techtoolslist > FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment > Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ > --- Questa e-mail è stata controllata per individuare virus con Avast antivirus. http://www.avast.com _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

6 10

New Useful Toy: Wireless voltmeter Mooshimeter - relays to your cell phone
by John Robertson 05 Sep '16

05 Sep '16

This looks very handy: https://moosh.im/product/mooshimeter/ The video is quite compelling so I bought one... eBay listing for main distributor: http://www.ebay.com/itm/381738473807 John :-#)# -- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

9010 fan question
by Tony Jones 02 Sep '16

02 Sep '16

My 9010 started making a weird pulsing noise which I tracked down to the fan. Like it was trying to start but couldn't. I've never given the fan any thought before, does it run all the time? It's just two wires off the motherboard (which weren't pulsing per my scope) but these go to some kind of fan sending unit which feeds 4 wires to the physical fan. Is this some kind of temperature control? The fan blades didn't spin easily, quite a bit of resistance so I was assuming the fan itself was the problem rather than the sending unit. I have the model# specs for the fan so I'll look for a replacement but that might be challenging, replacing just the fan part and connecting to the existing grey sending unit may be another option. I couldn't find any previous mention of this in the archives, curious if anyone has been here before? Thanks! Tony _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

6 11