I only attached pods when power was off .... John Robertson <jrr@flippers.com> wrote:

AL SACCO_hm wrote:

...

HELP FOR FLUKE 9100 USER

Need some help on an issue that has happened during power up on multiple Fluke 9100a or ft units that I tested.... if no pod is attached to 9100 during it comes up "no pod connected"..... if any pod is attached it comes up "enabled line caused timeout" any idea or help would be helpful.....

AL SACCO _______________________________________________

As I recall you can't hook up a pod while the power is on, only when off...

John :-#)#

-- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out"

_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/