- TechToolsList - listserv.classicarcade.com

Data I/O 29B on XP?
by Joseph Magiera 30 Nov '07

30 Nov '07

Can anyone confirm that they can interface with a Data I/O 29B using a PC running Windows XP? I finally am going to try to get my Data I/O going, and I plan on using a Pentium III, 500mg PC, loaded with Windows XP. A pretty unpowerful computer by today's standard, but should be plenty for running the Data I/O software (if it can indeed work on XP). Any tips or tricks to note on installing/running? Thanks, Joe joemagiera(a)ameritech.net _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

10 16

Making a new test bench
by Matt Rossiter 11 Oct '07

11 Oct '07

I'm going to get a bigger/better table for doing all my test bench stuff in the garage. Can someone recommend material I should buy for the table covering? Meaning, something static free and durable and well suited for scratchy circuit boards. Thanks Matt _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

4 3

Arium ML4100 logic pod probe
by Arao Hayashida Filho 01 Aug '07

01 Aug '07

Hi, I made one 32 bit logic pod probe for my Philips PM3632 (equals to ML4100) by myself, my logic analyzer don't came with them, if this can help anyone please mail me. See the photos on my fotolog if interests you. http://shw.fotopages.com/15523934/No-comeo-de-tudo.html http://shw.fotopages.com/15523931/Conjunto-completo-ligeiramente-desfocado.… http://shw.fotopages.com/15523933/Teste.html Thanks for who put the schematics on the list. -- -- Arao H. F. Electrical engineering student Electronics service Tel: +5535-36213332 _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

2 1

Fwd: GPIB
by Aidan Grey 29 Jun '07

29 Jun '07

Hello all, I have a few questions relating to PC interface cards: 1> I have an old dataman omnipro2 programmer which uses a custom ISA card. Has anyone run something like this on a P3 motherboard running at 1Ghz? - I am currently running it on a 486DX2-66 but it ill only run when I set the BIOS to run in CGA/EGA graphics mode. 2>I was wondering if anybody has any advice when looking for a suitable GPIB controller for this same PC. I intend to use it with my HP54120 18Ghz scope via Agilent VEE. I have never used VEE and never used GPIB. Many thanks Steve Steve: There is a lot of information on GPIB on the National Instruments Web site at www.ni.com. There is also a GPIB news forum there, with many GPIB experts offering their advise. Unfortunately, I don't have the URL for that forum, but it is echoed on a newsgroup. You might search your news provider for any newsgroup containing "gpib". I would suggest buying an NI ISA GPIB controller for your machine rather than an HP one. They are offered regularly on EBay. The software support for NI cards seems a little better than for HP right now. I assume that the PC in question has only ISA slots. If not, there are other options. The problem with you omnipro2 card sounds a little odd. Is it possible that it is memory mapped, and interferes with the VGA memory regions? Or, is it using IRQ 9 and causing an IRQ conflict with VGA? Aidan Grey _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

3 3

WTB : 6809 Fluke pod
by Andy Welburn 22 Jun '07

22 Jun '07

hi all.. subject says it all mostly :) I have a pod, bought it 3-4 years ago, ran selftest on it when it arrived, and stored it away.. i go to use it yesterday and the bloomin thing is saying pod type not known :( so... how much for another pod if any of you have one for sale? thanks.. Andy _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

3 2

Motorola XM Series Technical Repair Manual (PDF)
by David Haynes 12 Jun '07

12 Jun '07

I finally found some time this evening to get this scanned and posted. Motorola_XM_Series_Technical_Repair_Manual.pdf <http://arcarc.xmission.com/PDF_Monitors/Motorola_XM_Series_Technical_Repair _Manual.pdf> (1MB) Enjoy David Haynes dlh(a)bombjack.org www.bombjack.org <http://www.bombjack.org/> _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

2 1

Hewlett Packard 54120B 20Ghz oscilloscope
by Ness and Steve 26 May '07

26 May '07

Hello, I was wondering if anyone out there has any experience with the above osciloscope. My setup includes: 54120B Mainframe unit. 54122A Test set. What I would like to know is of there is a probe that suits this monster or if they were generally used with custom cabling. I have the manual but couldn't find a reference to any probe. Many thanks Steve _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

1 0

Fluke 9100 parts libraries
by Andy Welburn 13 May '07

13 May '07

hi all.. Just wondered if there was a set of parts libraries around for 9100 GFI system building...? the 9100 comes with the demo/trainer part description libraries of course, but I wondered if Fluke issued an extra library of other common parts so that you wouldn't neccesarily have to laboriously enter all the details? Or does anyone have any parts libraries they wished to share? for now i'm building my own, but i'm looking for shortcuts of course ;) I'd like to reciprocate info with anyone that can help out.. enjoy.. Andy _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

1 0

Weller/Ungar desolder tips 400x
by Electronicamuse＠aol.com 05 May '07

05 May '07

Desperately hoping to find a supplier with some of this NLA stock. 4005, 4006, 4007, 4008 I don't care which. Haven't seen any on eBay and all Google leads don't actually have any stock. The station is 4624 and I think is called UTC series. Thanks! Dave ************************************** See what's free at http://www.aol.com. _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

1 0

WTB : 68k pod
by Andy Welburn 05 May '07

05 May '07

Its just not my week for pods. I went to use my 68000 pod, having not used it for a number of years, and i look in the box and all i find is my faulty one in pieces, no sign of the working one :( I think I loaned it to somebody, but i can't figure out who. So anyhow, I'd like to get another one, does anyone have any for sale? Andy _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

2 2