March 2013 - TechToolsList - listserv.classicarcade.com

FLUKE 9100A SCSI to CF Adapter - Success with Stratos CF AZTECMONSTER
by techtools-steve 04 Mar '13

04 Mar '13

I received a couple emails inquiring about the SCSI to CF adapter I used so here are the details. Everything you need is currently available at a reasonable price and the physical installation was rather painless. The adapter I used is the Stratos CF AZTECMONSTER and you can buy one direct from Japan http://www.artmix.com/CF_AztecMonster.html but I found it easier and with significantly cheaper shipping to pick one up on ebay. There were multiple listings for the board on ebay yesterday but it appears each had multiple bidders and closed above the starting price. My FLUKE 9100A has the V6 roms installed and was configured using Service Disk 1.4. I have successfully loaded the v4-1b software with the v6.1 update pending availability of new disks (hint-hint Andre)! http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_01.jpg http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_02.jpg <http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_01.jpg> http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_03.jpg <http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_01.jpg> http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_04.jpg <http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_01.jpg> http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_05.jpg <http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_01.jpg> I hope this info helps someone else unbrick their Fluke 9100 after a fatal hard disk failure. _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

5 12

Fluke 9010A Display problem
by Jose Luiz Martins 03 Mar '13

03 Mar '13

Hi ! Today I've decided to put my 9010A back to work after 5 years. It boots OK, but the display is not showing some parts of some letters. For instance the K and V looks like I. I opened and performed the display test, as mentioned on Workshop manual, and everything seams to be right. Any clue on that ? Thanks JL _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 2

Fluke 9100 hard drives
by David Shoemaker 01 Mar '13

01 Mar '13

Well with all the trouble going around trying to get a SCSI -> IDE for CF to work anyone know what the max size of SCSI drive will work in the 9100? There are a few on ebay and I need to replace the drive in my 9100. David _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 2