September 2003 - TechToolsList - listserv.classicarcade.com

WTB : 6502 fluke pod
by Andy Welburn 10 Sep '03

10 Sep '03

hi all.. I'm looking for a 6502 pod for my fluke 9100, it seems one of the tempests i was working on has killed my only working one.. I don't have oodles of spare time to sit and fix it, frankly fluke pods piss me off with all those customs :) So, i'm looking to buy another 6502 pod, and willing to trade in my faulty pod with anyone who may wish to part-exit or not.. And FYI the bad pod is coming up with random Address bus bits reporting as not driveable.. let me know off list if you would be so kind.. thanks :) Andy Welburn www.andys-arcade.com

5 6

RE: [techtoolslist] 6800 -> 6502 fluke pod conversion
by Joe 10 Sep '03

10 Sep '03

Do you have any around to sell? Even originals? -----Original Message----- From: John Robertson [mailto:jrr@flippers.com] Sent: Wednesday, September 10, 2003 1:45 AM To: techtoolslist(a)www.flippers.com; techtoolslist(a)www.flippers.com Subject: RE: [techtoolslist] 6800 -> 6502 fluke pod conversion I was looking at building a RS-232 port for my collection of 9010A's but haven't had the time...the problem is the hardware based ICs, I haven't found a replacement for the original part that would allow me to push the speed any faster - was thinking 120K would be nice ;-) John :-#)# At 02:00 AM 10/09/2003 -0500, Joe wrote: >Looks like the major difference is PHI 0 and 2. > >The 2 are extremely close. All address and data lines are on the same >pins. I believe op codes are the same. Definitely worth looking into. > > >Still looking for a 9010a RS-232 module, >JB >-----Original Message----- >From: John Robertson [mailto:jrr@flippers.com] >Sent: Tuesday, September 09, 2003 5:49 PM >To: techtoolslist(a)www.flippers.com >Subject: Re: [techtoolslist] 6800 -> 6502 fluke pod conversion > >I haven't done it, but it sure looks easy to find out. Your 6800 pod has >to >have the jumpers though, and not all of them do. > >It might be nice to make it switchable...a 2532 and some extra gates and >a >toggle switch? > >John :-#)# > >At 11:29 PM 09/09/2003 +0100, Dave Langley wrote: > > >I was wondering ... > > > >Since the schematics for the 6502 pod show it can be jumpered to go >from > >6502 to 6800, has anyone ever converted a dedicated 6800 pod to 6502? > > > >I have a unit that I can try on, just wondering if anyone has actually > >done this already to save me re-inventing the wheel? > > > >Thanks in advance for any input .... > > > >Dave Langley > >www.robotron-2084.co.uk > > > >

1 0

RE: [techtoolslist] 6800 -> 6502 fluke pod conversion
by Joe 10 Sep '03

10 Sep '03

Looks like the major difference is PHI 0 and 2. The 2 are extremely close. All address and data lines are on the same pins. I believe op codes are the same. Definitely worth looking into. Still looking for a 9010a RS-232 module, JB -----Original Message----- From: John Robertson [mailto:jrr@flippers.com] Sent: Tuesday, September 09, 2003 5:49 PM To: techtoolslist(a)www.flippers.com Subject: Re: [techtoolslist] 6800 -> 6502 fluke pod conversion I haven't done it, but it sure looks easy to find out. Your 6800 pod has to have the jumpers though, and not all of them do. It might be nice to make it switchable...a 2532 and some extra gates and a toggle switch? John :-#)# At 11:29 PM 09/09/2003 +0100, Dave Langley wrote: >I was wondering ... > >Since the schematics for the 6502 pod show it can be jumpered to go from >6502 to 6800, has anyone ever converted a dedicated 6800 pod to 6502? > >I have a unit that I can try on, just wondering if anyone has actually >done this already to save me re-inventing the wheel? > >Thanks in advance for any input .... > >Dave Langley >www.robotron-2084.co.uk > >

1 0

RE: [techtoolslist] 6800 -> 6502 fluke pod conversion
by John Robertson 10 Sep '03

10 Sep '03

I was looking at building a RS-232 port for my collection of 9010A's but haven't had the time...the problem is the hardware based ICs, I haven't found a replacement for the original part that would allow me to push the speed any faster - was thinking 120K would be nice ;-) John :-#)# At 02:00 AM 10/09/2003 -0500, Joe wrote: >Looks like the major difference is PHI 0 and 2. > >The 2 are extremely close. All address and data lines are on the same >pins. I believe op codes are the same. Definitely worth looking into. > > >Still looking for a 9010a RS-232 module, >JB >-----Original Message----- >From: John Robertson [mailto:jrr@flippers.com] >Sent: Tuesday, September 09, 2003 5:49 PM >To: techtoolslist(a)www.flippers.com >Subject: Re: [techtoolslist] 6800 -> 6502 fluke pod conversion > >I haven't done it, but it sure looks easy to find out. Your 6800 pod has >to >have the jumpers though, and not all of them do. > >It might be nice to make it switchable...a 2532 and some extra gates and >a >toggle switch? > >John :-#)# > >At 11:29 PM 09/09/2003 +0100, Dave Langley wrote: > > >I was wondering ... > > > >Since the schematics for the 6502 pod show it can be jumpered to go >from > >6502 to 6800, has anyone ever converted a dedicated 6800 pod to 6502? > > > >I have a unit that I can try on, just wondering if anyone has actually > >done this already to save me re-inventing the wheel? > > > >Thanks in advance for any input .... > > > >Dave Langley > >www.robotron-2084.co.uk > > > >

1 0

List should be OK now...
by John Robertson 09 Sep '03

09 Sep '03

Hi All, According to my web host the list should be working...so if you posted in the last few weeks (I was away) and didn't see a result please repost. Sorry about that! John :-#)# How to subscribe or unsubscribe from TTL To do either you send email to "MajorDomo(a)flippers.com" and in the body you state either "Subscribe techtoolslist" or "Unsubscribe techtoolslist", note that the Subject is "" (Blank)... FTP site is: ftp://ftp.flippers.com/TTL/

4 4

WTB: Fluke 9010a RS-232 port
by Joe 09 Sep '03

09 Sep '03

Hi, I am in need of a RS-232 card for the 9010a. Please email me with price. Thanks, JB

1 0

Re: Fluke 9100A TL/1 Reference Manual
by John Robertson 09 Sep '03

09 Sep '03

1 0

Fluke 9100A TL/1 Reference Manual
by James Bright 07 Sep '03

07 Sep '03

1 0