December 2003 - TechToolsList - listserv.classicarcade.com

WTT: My SW CPO for Fluke 9010 training
by Electronicamuse＠aol.com 07 Dec '03

07 Dec '03

2 1

big pile of 9100 stuff on ebay
by Aaron Nabil 05 Dec '03

05 Dec '03

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2579247772 If you ever want to (un)subscribe yourself with TTL, you can send mail to: <Majordomo(a)flippers.com> with the following command in the body of your email message: (un)subscribe techtoolslist or from another email account, besides xxx(a)yyy.com: (un)subscribe techtoolslist xxx(a)yyy.com

3 2

9100 Floppy drives.
by John Robertson 04 Dec '03

04 Dec '03

I have a couple of dead floppies on my 9100's and was wondering if anyone knows how to set up a 1.44 to run on them. The Drive Select has to "0", but then nothing much happens. The latest version of the System setup disc (Rv1.4 - for SCSI) seems to support the Canon HD drive but I have no idea what drive that was supposed to be. The drives supported (Rv1.4) are: Canon (MD350) Sony F17 TEAC FD235 Mitsu(mi?) MF355C Canon HD (unknown model) The service manual says (Pg 3-34) that the floppy control lines are: DS0, DS1 (Drive Selects - D0 for 9100) Spare (not used - is this the High Density enable?) MINI (selects floppy clock speed for 5-1/4 & 3-1/2 or 8") DENS (single or double density - but how does this fit in with a Canon HD drive?) P0, P1 (write pre-compensation time 0, 125ns, 250ns, or 375ns) EN-ENT (Floppy Interrupt) Anyone have info on any of these drives and can identify the parameters needed? Thanks! John :-#)# How to subscribe or unsubscribe from TTL To do either you send email to "MajorDomo(a)flippers.com" and in the body you state either "Subscribe techtoolslist" or "Unsubscribe techtoolslist", note that the Subject is "" (Blank)... FTP site is: ftp://ftp.flippers.com/TTL/

1 1

Hosting the TTL archive...on Vectorlist.org?
by John Robertson 04 Dec '03

04 Dec '03

I was asked by Chris Candreva of vectorlist.org to place the archive of TTL there...not thinking very much I said sure and sent it to him.. However it has been pointed out to me that some folks might not like this so I have asked him to pull the archive until after I poll ALL the members. So, the questions are: 1) Do you have a problem with public access to TTL list? 2) Do you want your email addresses removed (I assume yes to this question) 3) What about the FTP site? I need to find a larger storage site as my host doesn't give me the capacity of the previous host (more reliable though)...and I think it need to be members only - simple password access that is stripped from the archives. Suggestions? Should we even HAVE a public archive? John :-#?#

2 2

RE: F9100A: What is the BACKUP-3.TDO contain?
by James Bright 02 Dec '03

02 Dec '03

1 0

F9100A: What is the BACKUP-3.TDO contain?
by James Bright 02 Dec '03

02 Dec '03

1 0