- TechToolsList - listserv.classicarcade.com

Re: Copying Fluke 9100 floppies
by Kev 06 Sep '02

06 Sep '02

-----Original Message----- From: John Robertson <jrr(a)flippers.com> To: TechToolsList(a)flippers.com <TechToolsList(a)flippers.com> Cc: Paul Swan <pswan(a)lsil.com> Date: Thursday, September 05, 2002 8:57 PM Subject: Re: Copying Fluke 9100 floppies >The pod library discs are shipped with every 9100/9105, as well as two User >Discs, and two System Discs. The machine is serialized AFAIK, and the disc >identifies or sets that. It would be nice to find a non-serialized disc set... > The machine writes back to the disc during install as I understand it. I belive there is also a EEPROM that is set at this time. The programmer option should have another set of disc. >The 9100's "Getting Started A Guides For New Users" mentions "The >multi-function interface uses the popular Small Computer Systems Interface >(SCSI) standard. It provides high-speed access to hard disks, tape backup >systems, and other mass storage devices." Then it says to connect a SCSI >peripheral to the mainframe "Connect the device's cable to the 50-pin MFI >connector located on the back of the mainframe (Figure 4)." Mind you it >says nothing further on the subject... > I belive I've been told that you can not boot from an external drive There is also an ethernet option for the 9100s >Got to keep digging... > Yes! Kev

1 0

Copying Fluke 9100 floppies
by John Robertson 06 Sep '02

06 Sep '02

Anyone have any ideas on this? I just got in some double-density 9100 discs and I wish to back them up. I believe these are OS9 - same as the Trash-80? That would be interesting, perhaps the Trash-80 is the way to go. Anyone know one way or the other on this? John :-#)#

3 3

Use of a fluke 6802 Pod?
by steve＠coule.freeserve.co.uk 05 Sep '02

05 Sep '02

I've just picked up a 6809 fluke pod and the guy had a 6802/6808 pod kicking around that he let me take to test out etc. Anyway, off the top of my head I can't think of anything that uses a 6802 or 6808! Any hints? Steve _______________________________________________________________________ Freeserve AnyTime, only £13.99 per month with one month's FREE trial! For more information visit http://www.freeserve.com/time/ or call free on 0800 970 8890

5 4

WTB: Fluke 9010A plus 6502 + Z80 pods + probe, RS232 port
by Phil Morris 28 Aug '02

28 Aug '02

I'm in the UK and am on the lookout for a fully working Fluke 9010A plus sundry items as mentioned in the subject of this message. I am reluctant to buy from the US due to the weight of the items and potential Airmail shipping cost, but will buy from there if I can't find any in the UK or Europe. Des anyone have any for sale please, or know of anyone/anywhere that does? Thanks, Phil

1 0

WTD: Hp10529A logic comparator
by Chris Toseland 20 Aug '02

20 Aug '02

1 0

Dumping ROMs
by John Robertson 19 Aug '02

19 Aug '02

3 4

New manuals scanned in....
by John Robertson 17 Aug '02

17 Aug '02

I have just scanned in two more manuals - one is the training manual (9010A Micro-System TroubleshooterWorkbook.pdf) provided by Fluke for teaching service people how the 9010A works...the other one is the manual for programming the 9010A (RKSIC) and is called 9010A Language Compiler.PDF If anyone wants to compress these they are welcome to do so, the files are not protected... ftp://ftp.flippers.com/Fluke/PDFs/ Enjoy! John:-#)#

1 0

Need AY8930 chips
by Joe Magiera 16 Aug '02

16 Aug '02

3 3

Fluke 900 Dynamic Troubleshooter
by John Robertson 08 Aug '02

08 Aug '02

Anyone know what this beastie can do? Is it the poor man's 9000? I just got it in and it works, but with no manual or accessories it isn't a lot of use...also it thinks it has a hardware problem... http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=1749187249 Probably paid too much. John :-#)#

2 1

Fluke Pod kits
by John Robertson 08 Aug '02

08 Aug '02

I've posted some pictures to the ftp site of the Z8 pod and the kit circuit board. ftp.flippers.com/Fliuke The kit circuit board could be reproduced if anyone thinks it would be worth it. If anyone would like to take it on...I will lend the original. John :-#)#

1 0