February 2015 - TechToolsList - listserv.classicarcade.com

Wanted: Fluke 9100A VFD Display
by William Stillwell 12 Feb '15

12 Feb '15

Anybody have a dead Fluke 9100 that has a good VFD ? http://romident.coinopflorida.com/fluke9100/IMG_4403.JPG :( _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

9 22

Kurz-Kasch test cards on eBay
by John Robertson 04 Feb '15

04 Feb '15

Coinop Warehouse is selling off a few of these and so I thought folks here may be interested: http://stores.ebay.com/coinopwarehouse?_dmd=1&_nkw=kurz John :-#)# -- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

9010A Tape Drive controller - code dumped?
by Sprout 04 Feb '15

04 Feb '15

While working on a tape drive, I came across an older post from about 5 years ago, where somebody was looking for the code for U1 in the 9010A tape drive. At the time, you (John) were going to dump it from some known-good drives, but I don't see that it ever got uploaded (I'm not seeing it on the FTP site). I came across an Intel D8741A mixed in with my EPROM's, and decided to test whether it was good by erasing, and copying over the code from the same IC in the tape drive I had apart. Drive in question shows U1 as "536094, v1.0" - if you don't have that dumped/saved somewhere, I'm happy to upload it; just let me know. Doesn't hurt to have any/all code dumped, though I don't know that these fail much. Regards, Brent _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 1

Anybody ever make a Fluke pod?
by David Gersic 01 Feb '15

01 Feb '15

So I've got a new (to me) Fluke 9010 here. I'm looking to buy Z80 and 6802 pods for it, but since most of the boards I work on are Signetics 2650 based (Zaccaria), I'm wondering what it would take to make a 2650 pod. I've seen the article on making the Z80 to 2650 adapter, which allows for some testing, but what I'd really like is a full 2650 pod complete with all UUT support. >From what I've read so far, the pods have some custom chips in them, so this isn't going to be easy. I understand that. But has anybody ever done this before? _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 1