November 2014 - TechToolsList - listserv.classicarcade.com

Data I/O 3980 main supply output setting?
by Stuart Banks 17 Nov '14

17 Nov '14

Just recently acquired a Data I/O 3980 programmer in a not working condition and have determined that the open frame power supply made by Power One MAP80-1012 is dead. I located a replacement NOS Power One MAP80-1012 supply on ebay and would like to complete the re-installation. This power supply output is variable from 10V to 15V. Does anybody know the exact set-point output voltage value required by the 3980 for this power supply? I do not have a service manual for this beast. Does anyone have a scanned copy or original service manual for the Data I/O 3900/3910/3980 programmer series? Thanks, Stuart _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

2 1

Benchmate manual
by Joe Magiera 16 Nov '14

16 Nov '14

Couple questions. First the easiest one: Are: ftp://ttl.arcadetech.org/TTL/Test_Equipment ftp://ftp.flippers.com the same? Secondly, I thought James Marous uploaded the manual for the Benchmate 400. I looked on the arcadetech ftp site and can't find it. I know he sent it to me, but I can't find the email. If anyone knows where this manual is located, can you please point me to it? James, if you are still out there, could you please email it to me again? Joe _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

3 3

Fluke 80286 Interface pod 9000A-80286H
by sales htbs 03 Nov '14

03 Nov '14

Fluke 80286 Interface pod 9000A-80286H I just found one here and it is missing the end that plugs into the red cable The manual says plc to lcc ? does not show a part number Does anyone have a end for this pod It is the part that goes to the uut from the pod ribbon cable Thanks tony _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

Fluke 80286 Interface pod 9000A-80286H
by Tony htbs 03 Nov '14

03 Nov '14

Fluke 80286 Interface pod 9000A-80286H I just found one here and it is missing the end that plugs into the red cable The manual says plc to lcc ? does not show a part number Does anyone have a end for this pod It is the part that goes to the uut from the pod ribbon cable Thanks tony _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0

Fluke 9100a Calibration Module
by Default 01 Nov '14

01 Nov '14

------------------------------ The calibration module is used to calibrate an I/O module as. Described in the "Self-Tests, Configuration and Calibration" section of the *Fluke* 9100a Technical Service Manual. I dont have a 9100a to test, but they look brand new. I have a bunch. $30 shipped anywhere in the US. _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

1 0