December 2005 - TechToolsList - listserv.classicarcade.com

9010A 6502 pod for sale
by kklopp＠erols.com 21 Dec '05

21 Dec '05

DON'T REPLY TO ME, I can not vouch for the seller, I'm just forwarding this to this list if anyone is interested... Richard Freedman <rjfreedman1(a)comcast.net> I have a very clean and tested Fluke 9010a with a 6502 pod(tested) and an 8085 pod that is missing pin 20(gnd) on the connector but is probably fixable. Documentation includes: 9000 Series Introductory Training 9010a operators manual 9010a programmers manual 9000a-6502 instruction manual Will also throw in 8 new tapes for the internal drive. Price $325. Drop me an email if you have questions. Dick Freedman Original Message: ----------------- From: voyager(a)galaxian.com Date: Fri, 09 Dec 2005 06:23:01 -0700 To: techtoolslist(a)flippers.com Subject: [Techtoolslist] Fluke 8088 pod and a moron... <div>I received a Fluke 8088 pod yesterday and plugged it in to do a self test to see if my 'untested' pod worked or not. Well the test failed, but if I wiggled the cable at the pod side it seemed to pass - so I pulled the case apart to look for loose connections or wires. I looked at the cable connection that was a little lose, disconnected it, plugged it back in and ran the test again to produce nothing at all. Next, I realized the connector was on backwards - nice. Of course, reversing it producing nothing but a failure worse than before and wiggling the cable does nothing. Anyone done this yet that has some info on how much damage it did to the pod? I could troubleshoot it with another 8088 pod, but I do not have another...</div> <div> </div> <div>Greg </div> -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ . _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

2 1

HP LA Inverse Assembler
by Ed Osborne 18 Dec '05

18 Dec '05

1 0

Re: [Techtoolslist] Z80 versus Z8000/Z8002
by ArselComm＠aol.com 11 Dec '05

11 Dec '05

1 0

Re: [Techtoolslist] Fluke 8088 pod and a moron...
by John Robertson 11 Dec '05

11 Dec '05

Unlikely that reversing the cable would damage the pod. The inputs are ALL protected up to 15VDC as I recall. Rather it is far more likely that you simply have a bad cable. You can order one from Digi-Key - Single-Ended - Style 2 (or 4 depending on where you want pin 1) from CW Industries - the Canadian part number (hey I'm in Canada) is C2PXT-4018M-ND for an 18 inch one that you can then simply crimp on the 40 pin socket #CSR40T-ND (with strain relief). At least that's what I would do (after rummaging through my pile of pod spare parts (extensive)). John :-#)# At 6:23 AM -0700 12/9/05, voyager(a)galaxian.com wrote: >I received a Fluke 8088 pod yesterday and plugged it in to do a self >test to see if my 'untested' pod worked or not. Well the test >failed, but if I wiggled the cable at the pod side it seemed to pass >- so I pulled the case apart to look for loose connections or wires. >I looked at the cable connection that was a little lose, >disconnected it, plugged it back in and ran the test again to >produce nothing at all. Next, I realized the connector was on >backwards - nice. Of course, reversing it producing nothing but a >failure worse than before and wiggling the cable does nothing. >Anyone done this yet that has some info on how much damage it did to >the pod? I could troubleshoot it with another 8088 pod, but I do >not have another... > >Greg _______________________________________________ Techtoolslist mailing list Techtoolslist(a)flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

4 8

Z80 versus Z8000/Z8002
by Adam Courchesne 11 Dec '05

11 Dec '05

2 1

Fluke 8088 pod and a moron...
by voyager＠galaxian.com 09 Dec '05

09 Dec '05

1 0