Hi Steve, Let me guess, you are using Outlook Express as a mail reader... I will insert the two images in just below this text, the images are large - 4mb - so you can see the details. John :-#)# mail@nessandsteve.plus.com wrote:
Hello John, Thanks for the response. No pictures attached or linked though. I have been collating information to get my unit working so a picture of your self test result page would be handy.
Do you have the interface pod for the unit?
I will pass on the fluke pod as I can get one from Art for $100 including the postage.
Thanks Steve
Hi Steve,
My unit does not pass self test as you can see from the photo. If I tell it to "ignore" it then does the self test again, going past the Memory test, and into the Hardware Test. Gets up to Hardware 56 and then the fail screen reappears.
I have two manuals for the machine and the operators book says to contact FLUKE to identify what the self test problem is...that is a lot of use!
PIctures included. I have no spare parts/accessories (that I know of!) for this 900 series unit.
I do have probes for the 9010 - they are $150 each.
Asking $100 plus shipping...
John :-#)#
Backflipper wrote:
Hello John, I hope you had a good holiday. What can we do about this fluke 900 you have? Also do you have any data aquisition probes for the 9010a? Cheers Steve
----- Original Message ----- *From:* John Robertson <mailto:jrr@flippers.com> *To:* mail@nessandsteve.plus.com <mailto:mail@nessandsteve.plus.com> *Sent:* Saturday, November 29, 2008 9:41 PM *Subject:* Re: [Techtoolslist] Fluke 900 dynamic trouble shooter
Hi Steve,
Got the email, but I am going on vacation for a week and won't be able to dig it out before I go.
Remind me in a week or so...
John :-#)#
mail@nessandsteve.plus.com wrote:
That sounds good to me. I have sent you an email. Steve
Backflipper wrote:
Not to be confused with the dedicated CPU testers similar to the 9010a.
I have one and it is displaying failures on boot up, so I have been putting together my notes on what I have found as there is no service manual available. Is anybody else interested in this information, does anybody else have one that can send me details on the fault report they have?
I know a few people out there have had one infact someone posted on here a few months back with one but I couldn't get in touch, Bill if you are still out there can you get in touch.
Cheers Steve
I have a 900 that is simply collecting dust - no manuals though. If you can use it get in touch with me. It seems to have a problem with memory as I recall, but I haven't turned it on in many years...
John :-#)#
-- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out"
-- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out"
-- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out"
-- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out"
