Hello John,
Thanks for the response. No pictures attached or linked though. I have
been collating information to get my unit working so a picture of your
self test result page would be handy.

Do you have the interface pod for the unit?

I will pass on the fluke pod as I can get one from Art for $100 including
the postage.

Thanks
Steve
  

Hi Steve,

My unit does not pass self test as you can see from the photo. If I tell
it to "ignore" it then does the self test again, going past the Memory
test, and into the Hardware Test. Gets up to Hardware 56 and then the
fail screen reappears.

I have two manuals for the machine and the operators book says to
contact FLUKE to identify what the self test problem is...that is a lot
of use!

PIctures included. I have no spare parts/accessories (that I know of!)
for this 900 series unit.

I do have probes for the 9010 - they are $150 each.

Asking $100 plus shipping...

John :-#)#

Backflipper wrote:
    

Hello John,
I hope you had a good holiday. What can we do about this fluke 900 you
have? Also do you have any data aquisition probes for the 9010a?
Cheers
Steve

    ----- Original Message -----
    *From:* John Robertson <mailto:jrr@flippers.com>
    *To:* mail@nessandsteve.plus.com <mailto:mail@nessandsteve.plus.com>
    *Sent:* Saturday, November 29, 2008 9:41 PM
    *Subject:* Re: [Techtoolslist] Fluke 900 dynamic trouble shooter

    Hi Steve,

    Got the email, but I am going on vacation for a week and won't be
    able to dig it out before I go.

    Remind me in a week or so...

    John :-#)#

    mail@nessandsteve.plus.com wrote:
      

    That sounds good to me.
    I have sent you an email.
    Steve


        

    Backflipper wrote:

          

    Not to be confused with the dedicated CPU testers similar to the
9010a.

    I have one and it is displaying failures on boot up, so I have
been
    putting together my notes on what I have found as there is no
service
    manual available. Is anybody else interested in this information,
does
    anybody else have one that can send me details on the fault
report they
    have?

    I know a few people out there have had one infact someone posted
on here
    a few months back with one but I couldn't get in touch, Bill if
you are
    still out there can you get in touch.

    Cheers
    Steve


            

    I have a 900 that is simply collecting dust - no manuals though.
If you
    can use it get in touch with me. It seems to have a problem with
memory
    as I recall, but I haven't turned it on in many years...

    John :-#)#

    --
    John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
    Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                     www.flippers.com
    "Old pinballers never die, they just flip out"



          

    --
    John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
    Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                     www.flippers.com
    "Old pinballers never die, they just flip out"


      

--
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                 www.flippers.com
"Old pinballers never die, they just flip out"


    

-- 
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                 www.flippers.com 
"Old pinballers never die, they just flip out"