What is funny, I looked high and low all morning and couldn't find one ( I did find a ton of PLCC->PGA ) but not the other way... I did just find this one :) { Emulation Technology PLCC Emulator Pod EP4-68-WW } http://www.ebay.com/itm/271847943513 And snagged it up.. Exactly what I need, and it has head pins for hooking up my LA or Scope :) Now I can hook up My Fluke 9110FT, and two 9010A(s) to a Leland offroad and access all three processors :) William Stillwell Hamster / KI4SWY Stillwell Software Solutions. Free Play Florida Arcade & Pinball Show Organizer -----Original Message----- From: Techtoolslist [mailto:techtoolslist-bounces@flippers.com] On Behalf Of John Robertson Sent: Friday, April 24, 2015 4:50 PM To: Technical Tools Mail List Subject: Re: [Techtoolslist] Anybody have a simple/cheap way? On 04/24/2015 11:50 AM, William Stillwell wrote:

To plug a Fluke pod with a pga package to a board with PLCC ? ie, PGA68 -> PLCC68 ? ( in this case a 80186 )

William Stillwell

Hamster / KI4SWY

Stillwell Software Solutions.

Free Play Florida Arcade & Pinball Show Organizer

All I can think of is using one of the cheap PLCC Eprom adapters as a starting point... There are a few on eBay, but they seem to start around $75. John :-#)# -- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/